After conversion of this driver to use powercap idle_inject core, this
driver doesn't use target_mwait value. So remove dead code.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull more thermal control updates from Rafael Wysocki:
 "These add support for debugfs-based diagnostics to the thermal core,
  simplify the thermal netlink API, fix system-wide PM support in the
  Intel HFI driver and clean up some code.

  Specifics:

   - Add debugfs-based diagnostics support to the thermal core (Daniel
     Lezcano, Dan Carpenter)

   - Fix a power allocator thermal governor issue preventing it from
     resetting cooling devices sometimes (Di Shen)

   - Simplify the thermal netlink API and clean up related code (Rafael
     J. Wysocki)

   - Make the Intel HFI driver support hibernation and deep suspend
     properly (Ricardo Neri)"

* tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
  thermal: intel: hfi: Add syscore callbacks for system-wide PM
  thermal: gov_power_allocator: avoid inability to reset a cdev
  thermal: helpers: Rearrange thermal_cdev_set_cur_state()
  thermal: netlink: Rework notify API for cooling devices
  thermal: core: Use kstrdup_const() during cooling device registration
  thermal/debugfs: Add thermal debugfs information for mitigation episodes
  thermal/debugfs: Add thermal cooling device debugfs information
  thermal: netlink: Pass thermal zone pointer to notify routines
  thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
  thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
  thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()

The kernel allocates a memory buffer and provides its location to the
hardware, which uses it to update the HFI table. This allocation occurs
during boot and remains constant throughout runtime.

When resuming from hibernation, the restore kernel allocates a second
memory buffer and reprograms the HFI hardware with the new location as
part of a normal boot. The location of the second memory buffer may
differ from the one allocated by the image kernel.

When the restore kernel transfers control to the image kernel, its HFI
buffer becomes invalid, potentially leading to memory corruption if the
hardware writes to it (the hardware continues to use the buffer from the
restore kernel).

It is also possible that the hardware "forgets" the address of the memory
buffer when resuming from "deep" suspend. Memory corruption may also occur
in such a scenario.

To prevent the described memory corruption, disable HFI when preparing to
suspend or hibernate. Enable it when resuming.

Add syscore callbacks to handle the package of the boot CPU (packages of
non-boot CPUs are handled via CPU offline). Syscore ops always run on the
boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend
and hibernation. Syscore ops only run in these cases.

Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Comment adjustment, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull thermal control updates from Rafael Wysocki:
 "These add support for the D1/T113s THS controller to the sun8i driver
  and a DT-based mechanism for platforms to indicate a preference to
  reboot (instead of shutting down) on crossing a critical trip point,
  fix issues, make other improvements (in the IPA governor, the Intel
  HFI driver, the exynos driver and the thermal netlink interface among
  other places) and clean up code.

  One long-standing issue addressed here is that trip point crossing
  notifications sent to user space might be unreliable due to the
  incorrect handling of trip point hysteresis in the thermal core:
  multiple notifications might be sent for the same event or there might
  be events without any notification at all.

  Specifics:

   - Add dynamic thresholds for trip point crossing detection to prevent
     trip point crossing notifications from being sent at incorrect
     times or not at all in some cases (Rafael J. Wysocki)

   - Fix synchronization issues related to the resume of thermal zones
     during a system-wide resume and allow thermal zones to be resumed
     concurrently (Rafael J. Wysocki)

   - Modify the thermal zone unregistration to wait for the given zone
     to go away completely before returning to the caller and rework the
     sysfs interface for trip points on top of that (Rafael J. Wysocki)

   - Fix a possible NULL pointer dereference in thermal zone
     registration error path (Rafael J. Wysocki)

   - Clean up the IPA thermal governor and modify it (with the help of a
     new governor callback) to avoid allocating and freeing memory every
     time its throttling callback is invoked (Lukasz Luba)

   - Make the IPA thermal governor handle thermal instance weight
     changes via sysfs correctly (Lukasz Luba)

   - Update the thermal netlink code to avoid sending messages if there
     are no recipients (Stanislaw Gruszka)

   - Convert Mediatek Thermal to the json-schema (Rafał Miłecki)

   - Fix thermal DT bindings issue on Loongson (Binbin Zhou)

   - Fix returning NULL instead of -ENODEV during thermal probe on
     Loogsoon (Binbin Zhou)

   - Add thermal DT binding for tsens on the SM8650 platform (Neil
     Armstrong)

   - Add reboot on the critical trip point crossing option feature
     (Fabio Estevam)

   - Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
     suspend/resume on AmLogic (Uwe Kleine-König)

   - Add D1/T113s THS controller support to the Sun8i thermal control
     driver (Maxim Kiselev)

   - Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)

   - Fix compilation warning in the tmon utility (Florian Eckert)

   - Add support for interrupt-based thermal configuration on Exynos
     along with a set of related cleanups (Mateusz Majewski)

   - Make the Intel HFI thermal driver enable an HFI instance (eg.
     processor package) from its first online CPU and disable it when
     the last CPU in it goes offline (Ricardo Neri)

   - Fix a kernel-doc warning and a spello in the cpuidle_cooling
     thermal driver (Randy Dunlap)

   - Move the .get_temp() thermal zone callback presence check to the
     thermal zone registration code (Daniel Lezcano)

   - Use the for_each_trip() macro for trip points table walks in a few
     places in the thermal core (Rafael J. Wysocki)

   - Make all trip point updates (via sysfs as well as from the platform
     firmware) trigger trip change notifications (Rafael J. Wysocki)

   - Drop redundant code from the thermal core and make one function in
     it take a const pointer argument (Rafael J. Wysocki)"

* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
  thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
  thermal: intel: hfi: Enable an HFI instance from its first online CPU
  thermal: intel: hfi: Refactor enabling code into helper functions
  thermal/drivers/exynos: Use set_trips ops
  thermal/drivers/exynos: Use BIT wherever possible
  thermal/drivers/exynos: Split initialization of TMU and the thermal zone
  thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
  thermal/drivers/exynos: Simplify regulator (de)initialization
  thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
  thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
  thermal/drivers/exynos: Drop id field
  thermal/drivers/exynos: Remove an unnecessary field description
  tools/thermal/tmon: Fix compilation warning for wrong format
  dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
  dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
  thermal/drivers/sun8i: Add D1/T113s THS controller support
  dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
  thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  thermal: amlogic: Make amlogic_thermal_disable() return void
  ...

In preparation to support hibernation, add functionality to disable an HFI
instance during CPU offline. The last CPU of an instance that goes offline
will disable such instance.

The Intel Software Development Manual states that the operating system must
wait for the hardware to set MSR_IA32_PACKAGE_THERM_STATUS[26] after
disabling an HFI instance to ensure that it will no longer write on the HFI
memory. Some processors, however, do not ever set such bit. Wait a minimum
of 2ms to give time hardware to complete any pending memory writes.

Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Previously, HFI instances were never disabled once enabled. A CPU in an
instance only had to check during boot whether another CPU had previously
initialized the instance and its corresponding data structure.

A subsequent changeset will add functionality to disable instances
to support hibernation. Such change will also make possible to disable an
HFI instance during runtime via CPU hotplug.

Enable an HFI instance from the first of its CPUs that comes online. This
covers the boot, CPU hotplug, and resume-from-suspend cases. It also covers
systems with one or more HFI instances (i.e., packages).

Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In preparation for the addition of a suspend notifier, wrap the logic to
enable HFI and program its memory buffer into helper functions. Both the
CPU hotplug callback and the suspend notifier will use them.

This refactoring does not introduce functional changes.

Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The _store callbacks of the trip point temperature and hysteresis sysfs
attributes invoke thermal_notify_tz_trip_change() to send a notification
regarding the trip point change, but when trip points are updated by the
platform firmware, trip point change notifications are not sent.

To make the behavior after a trip point change more consistent,
modify all of the 3 places where trip point temperature is updated
to use a new function called thermal_zone_set_trip_temp() for this
purpose and make that function call thermal_notify_tz_trip_change().

Note that trip point hysteresis can only be updated via sysfs and
trip_point_hyst_store() calls thermal_notify_tz_trip_change() already,
so this code path need not be changed.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The ACPI thermal library contains functions that can be used to
retrieve trip point temperature values through the platform firmware
for various types of trip points.  Each of these functions basically
evaluates a specific ACPI object, checks if the value produced by it
is reasonable and returns it (or THERMAL_TEMP_INVALID if anything
fails).

It made sense to hold it in drivers/thermal/ so long as it was only used
by the code in that directory, but since it is also going to be used by
the ACPI thermal driver located in drivers/acpi/, move it to the latter
in order to keep the code related to evaluating ACPI objects defined in
the specification proper together.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge changes in Intel thermal control drivers for 6.7-rc1:

 - Add power floor notifications support to the int340x thermal control
   driver (Srinivas Pandruvada).

 - Rework updating trip points in the int340x thermal driver so that it
   does not access thermal zone internals directly (Rafael Wysocki).

 - Use param_get_byte() instead of param_get_int() as the max_idle module
   parameter .get() callback in the Intel powerclamp thermal driver to
   avoid possible out-of-bounds access (David Arcari).

 - Add workload hints support to the the int340x thermal driver (Srinivas
   Pandruvada).

* thermal-intel:
  selftests/thermel/intel: Add test to read power floor status
  thermal: int340x: processor_thermal: Enable power floor support
  thermal: int340x: processor_thermal: Handle power floor interrupts
  thermal: int340x: processor_thermal: Support power floor notifications
  thermal: int340x: processor_thermal: Set feature mask before proc_thermal_add
  thermal: int340x: processor_thermal: Common function to clear SOC interrupt
  thermal: int340x: processor_thermal: Move interrupt status MMIO offset to common header
  thermal: intel: powerclamp: fix mismatch in get function for max_idle
  thermal: int340x: Use thermal_zone_for_each_trip()
  thermal: int340x: processor_thermal: Ack all PCI interrupts
  thermal: int340x: Add ArrowLake-S PCI ID
  selftests/thermel/intel: Add test to read workload hint
  thermal: int340x: Handle workload hint interrupts
  thermal: int340x: processor_thermal: Add workload type hint interface
  thermal: int340x: Remove PROC_THERMAL_FEATURE_WLT_REQ for Meteor Lake
  thermal: int340x: processor_thermal: Use non MSI interrupts by default
  thermal: int340x: processor_thermal: Add interrupt configuration function
  thermal: int340x: processor_thermal: Move mailbox code to common module