linux-stable.git/drivers/target, branch v4.9.41

target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce

2017-07-27T22:08:06+00:00

commit 1d6ef276594a781686058802996e09c8550fd767 upstream.

This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak,
that would be triggered during normal se_cmd shutdown or abort
via __transport_wait_for_tasks().

This would occur because target_complete_cmd() would catch this
early and do complete_all(&cmd->t_transport_stop_comp), but since
target_complete_ok_work() or target_complete_failure_work() are
never called to invoke se_cmd->transport_complete_callback(),
the COMPARE_AND_WRITE specific callbacks never release caw_sem.

To address this special case, go ahead and release caw_sem
directly from target_complete_cmd().

(Remove '&& success' from check, to release caw_sem regardless
 of scsi_status - nab)

Signed-off-by: Jiang Yi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Add login_keys_workaround attribute for non RFC initiators

2017-07-27T22:07:59+00:00

commit 138d351eefb727ab9e41a3dc5f112ceb4f6e59f2 upstream.

This patch re-introduces part of a long standing login workaround that
was recently dropped by:

  commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46
  Author: Nicholas Bellinger 
  Date:   Sun Apr 2 13:36:44 2017 -0700

      iscsi-target: Drop work-around for legacy GlobalSAN initiator

Namely, the workaround for FirstBurstLength ended up being required by
Mellanox Flexboot PXE boot ROMs as reported by Robert.

So this patch re-adds the work-around for FirstBurstLength within
iscsi_check_proposer_for_optional_reply(), and makes the key optional
to respond when the initiator does not propose, nor respond to it.

Also as requested by Arun, this patch introduces a new TPG attribute
named 'login_keys_workaround' that controls the use of both the
FirstBurstLength workaround, as well as the two other existing
workarounds for gPXE iSCSI boot client.

By default, the workaround is enabled with login_keys_workaround=1,
since Mellanox FlexBoot requires it, and Arun has verified the Qlogic
MSFT initiator already proposes FirstBurstLength, so it's uneffected
by this re-adding this part of the original work-around.

Reported-by: Robert LeBlanc 
Cc: Robert LeBlanc 
Reviewed-by: Arun Easi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Reject immediate data underflow larger than SCSI transfer length

2017-06-29T11:00:30+00:00

commit abb85a9b512e8ca7ad04a5a8a6db9664fe644974 upstream.

When iscsi WRITE underflow occurs there are two different scenarios
that can happen.

Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.

That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL.  In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.

However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.

In the wild, we've never had a iscsi host environment actually
try to do this.

For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.

Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:

   commit c72c5250224d475614a00c1d7e54a67f77cd3410
   Author: Roland Dreier 
   Date:   Wed Jul 22 15:08:18 2015 -0700

      target: allow underflow/overflow for PR OUT etc. commands

Cc: Roland Dreier 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Martin K. Petersen 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP

2017-06-29T11:00:30+00:00

commit 105fa2f44e504c830697b0c794822112d79808dc upstream.

This patch fixes a BUG() in iscsit_close_session() that could be
triggered when iscsit_logout_post_handler() execution from within
tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP
(15 seconds), and the TCP connection didn't already close before
then forcing tx thread context to automatically exit.

This would manifest itself during explicit logout as:

[33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179
[33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs
[33209.078643] ------------[ cut here ]------------
[33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346!

Normally when explicit logout attempt fails, the tx thread context
exits and iscsit_close_connection() from rx thread context does the
extra cleanup once it detects conn->conn_logout_remove has not been
cleared by the logout type specific post handlers.

To address this special case, if the logout post handler in tx thread
context detects conn->tx_thread_active has already been cleared, simply
return and exit in order for existing iscsit_close_connection()
logic from rx thread context do failed logout cleanup.

Reported-by: Bart Van Assche 
Tested-by: Bart Van Assche 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Tested-by: Gary Guo 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix kref->refcount underflow in transport_cmd_finish_abort

2017-06-29T11:00:30+00:00

commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.

This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().

Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:

[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51

Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.

To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.

Reported-by: Bart Van Assche 
Tested-by: Bart Van Assche 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Christoph Hellwig 
Cc: Himanshu Madhani 
Cc: Sagi Grimberg 
Tested-by: Gary Guo 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Re-add check to reject control WRITEs with overflow data

2017-06-14T13:06:00+00:00

commit 4ff83daa0200affe1894bd33d17bac404e3d78d4 upstream.

During v4.3 when the overflow/underflow check was relaxed by
commit c72c525022:

  commit c72c5250224d475614a00c1d7e54a67f77cd3410
  Author: Roland Dreier 
  Date:   Wed Jul 22 15:08:18 2015 -0700

       target: allow underflow/overflow for PR OUT etc. commands

to allow underflow/overflow for Windows compliance + FCP, a
consequence was to allow control CDBs to process overflow
data for iscsi-target with immediate data as well.

As per Roland's original change, continue to allow underflow
cases for control CDBs to make Windows compliance + FCP happy,
but until overflow for control CDBs is supported tree-wide,
explicitly reject all control WRITEs with overflow following
pre v4.3.y logic.

Reported-by: Bart Van Assche 
Cc: Roland Dreier 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Always wait for kthread_should_stop() before kthread exit

2017-06-07T10:07:47+00:00

commit 5e0cf5e6c43b9e19fc0284f69e5cd2b4a47523b0 upstream.

There are three timing problems in the kthread usages of iscsi_target_mod:

 - np_thread of struct iscsi_np
 - rx_thread and tx_thread of struct iscsi_conn

In iscsit_close_connection(), it calls

 send_sig(SIGINT, conn->tx_thread, 1);
 kthread_stop(conn->tx_thread);

In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().

So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.

This is invalid according to the documentation of kthread_stop().

(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
 early iscsi_target_rx_thread failure case - nab)

Signed-off-by: Jiang Yi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement

2017-05-20T12:28:34+00:00

commit 197b806ae5db60c6f609d74da04ddb62ea5e1b00 upstream.

While testing modification of per se_node_acl queue_depth forcing
session reinstatement via lio_target_nacl_cmdsn_depth_store() ->
core_tpg_set_initiator_node_queue_depth(), a hung task bug triggered
when changing cmdsn_depth invoked session reinstatement while an iscsi
login was already waiting for session reinstatement to complete.

This can happen when an outstanding se_cmd descriptor is taking a
long time to complete, and session reinstatement from iscsi login
or cmdsn_depth change occurs concurrently.

To address this bug, explicitly set session_fall_back_to_erl0 = 1
when forcing session reinstatement, so session reinstatement is
not attempted if an active session is already being shutdown.

This patch has been tested with two scenarios.  The first when
iscsi login is blocked waiting for iscsi session reinstatement
to complete followed by queue_depth change via configfs, and
second when queue_depth change via configfs us blocked followed
by a iscsi login driven session reinstatement.

Note this patch depends on commit d36ad77f702 to handle multiple
sessions per se_node_acl when changing cmdsn_depth, and for
pre v4.5 kernels will need to be included for stable as well.

Reported-by: Gary Guo 
Tested-by: Gary Guo 
Cc: Gary Guo 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target/fileio: Fix zero-length READ and WRITE handling

2017-05-20T12:28:34+00:00

commit 59ac9c078141b8fd0186c0b18660a1b2c24e724e upstream.

This patch fixes zero-length READ and WRITE handling in target/FILEIO,
which was broken a long time back by:

Since:

  commit d81cb44726f050d7cf1be4afd9cb45d153b52066
  Author: Paolo Bonzini 
  Date:   Mon Sep 17 16:36:11 2012 -0700

      target: go through normal processing for all zero-length commands

which moved zero-length READ and WRITE completion out of target-core,
to doing submission into backend driver code.

To address this, go ahead and invoke target_complete_cmd() for any
non negative return value in fd_do_rw().

Signed-off-by: Bart Van Assche 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Cc: Andy Grover 
Cc: David Disseldorp 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix compare_and_write_callback handling for non GOOD status

2017-05-20T12:28:34+00:00

commit a71a5dc7f833943998e97ca8fa6a4c708a0ed1a9 upstream.

Following the bugfix for handling non SAM_STAT_GOOD COMPARE_AND_WRITE
status during COMMIT phase in commit 9b2792c3da1, the same bug exists
for the READ phase as well.

This would manifest first as a lost SCSI response, and eventual
hung task during fabric driver logout or re-login, as existing
shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
to reach zero.

To address this bug, compare_and_write_callback() has been changed
to set post_ret = 1 and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE
as necessary to signal failure status.

Reported-by: Bill Borsari 
Cc: Bill Borsari 
Tested-by: Gary Guo 
Cc: Gary Guo 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman