linux-stable.git/drivers/target, branch v3.14.26 Linux kernel stable tree target: Don't call TFO->write_pending if data_length == 0 2014-12-06T23:55:38+00:00 Roland Dreier roland@purestorage.com 2014-10-14T21:16:24+00:00 20a1d763e503d4b54dfebb0d6977d867dadb2103 commit 885e7b0e181c14e4d0ddd26c688bad2b84c1ada9 upstream. If an initiator sends a zero-length command (e.g. TEST UNIT READY) but sets the transfer direction in the transport layer to indicate a data-out phase, we still shouldn't try to transfer data. At best it's a NOP, and depending on the transport, we might crash on an uninitialized sg list. Reported-by: Craig Watson <craig.watson@vanguard-rugged.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 885e7b0e181c14e4d0ddd26c688bad2b84c1ada9 upstream.

If an initiator sends a zero-length command (e.g. TEST UNIT READY) but
sets the transfer direction in the transport layer to indicate a
data-out phase, we still shouldn't try to transfer data.  At best it's
a NOP, and depending on the transport, we might crash on an
uninitialized sg list.

Reported-by: Craig Watson <craig.watson@vanguard-rugged.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
target: Fix APTPL metadata handling for dynamic MappedLUNs 2014-11-14T16:59:57+00:00 Nicholas Bellinger nab@linux-iscsi.org 2014-10-04T04:23:15+00:00 44e93420d1acc75d3598da79474f6e1e653b9f8c commit e24805637d2d270d7975502e9024d473de86afdb upstream. This patch fixes a bug in handling of SPC-3 PR Activate Persistence across Target Power Loss (APTPL) logic where re-creation of state for MappedLUNs from dynamically generated NodeACLs did not occur during I_T Nexus establishment. It adds the missing core_scsi3_check_aptpl_registration() call during core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in order to replay any pre-loaded APTPL metadata state associated with the newly connected SCSI Initiator Port. Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e24805637d2d270d7975502e9024d473de86afdb upstream.

This patch fixes a bug in handling of SPC-3 PR Activate Persistence
across Target Power Loss (APTPL) logic where re-creation of state for
MappedLUNs from dynamically generated NodeACLs did not occur during
I_T Nexus establishment.

It adds the missing core_scsi3_check_aptpl_registration() call during
core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in
order to replay any pre-loaded APTPL metadata state associated with
the newly connected SCSI Initiator Port.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE 2014-11-14T16:59:56+00:00 Quinn Tran quinn.tran@qlogic.com 2014-09-25T10:22:28+00:00 1ac25b80b8d6ed6e66b913f5864ea9b53161c3d4 commit 082f58ac4a48d3f5cb4597232cb2ac6823a96f43 upstream. During temporary resource starvation at lower transport layer, command is placed on queue full retry path, which expose this problem. The TCM queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same cmd twice to lower layer. The 1st time led to cmd normal free path. The 2nd time cause Null pointer access. This regression bug was originally introduced v3.1-rc code in the following commit: commit e057f53308a5f071556ee80586b99ee755bf07f5 Author: Christoph Hellwig <hch@infradead.org> Date: Mon Oct 17 13:56:41 2011 -0400 target: remove the transport_qf_callback se_cmd callback Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 082f58ac4a48d3f5cb4597232cb2ac6823a96f43 upstream.

During temporary resource starvation at lower transport layer, command
is placed on queue full retry path, which expose this problem.  The TCM
queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same
cmd twice to lower layer.  The 1st time led to cmd normal free path.
The 2nd time cause Null pointer access.

This regression bug was originally introduced v3.1-rc code in the
following commit:

commit e057f53308a5f071556ee80586b99ee755bf07f5
Author: Christoph Hellwig <hch@infradead.org>
Date:   Mon Oct 17 13:56:41 2011 -0400

    target: remove the transport_qf_callback se_cmd callback

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid 2014-10-05T21:52:18+00:00 Nicholas Bellinger nab@linux-iscsi.org 2014-09-17T18:45:17+00:00 f3c8aba3bc795c2241aeaf3d1e92ab4d5a6c0682 commit b53b0d99d6fbf7d44330395349a895521cfdbc96 upstream. This patch fixes a bug in iscsit_logout_post_handler_diffcid() where a pointer used as storage for list_for_each_entry() was incorrectly being used to determine if no matching entry had been found. This patch changes iscsit_logout_post_handler_diffcid() to key off bool conn_found to determine if the function needs to exit early. Reported-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b53b0d99d6fbf7d44330395349a895521cfdbc96 upstream.

This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.

This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.

Reported-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure 2014-10-05T21:52:18+00:00 Joern Engel joern@logfs.org 2014-09-02T21:49:54+00:00 b329630e27bcbcbc12e4b29d5bdbb82b5702968b commit 8ae757d09c45102b347a1bc2867f54ffc1ab8fda upstream. In iscsi_copy_param_list() a failed iscsi_param_list memory allocation currently invokes iscsi_release_param_list() to cleanup, and will promptly trigger a NULL pointer dereference. Instead, go ahead and return for the first iscsi_copy_param_list() failure case. Found by coverity. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ae757d09c45102b347a1bc2867f54ffc1ab8fda upstream.

In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.

Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.

Found by coverity.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE 2014-10-05T21:52:18+00:00 Sebastian Herbszt herbszt@gmx.de 2014-08-31T22:17:53+00:00 2a46c329707bb19180960f59580e6d33d61c6368 commit 1f0b030c45c781f9fe568e5e2a813d6c8567a051 upstream. Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE for setting the supported ALUA access states via configfs, originally introduced in commit b0a382c5. A value of 1 should enable the support, not disable it. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f0b030c45c781f9fe568e5e2a813d6c8567a051 upstream.

Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE for setting
the supported ALUA access states via configfs, originally introduced
in commit b0a382c5.

A value of 1 should enable the support, not disable it.

Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iscsi-target: fix iscsit_del_np deadlock on unload 2014-07-07T01:57:26+00:00 Mikulas Patocka mpatocka@redhat.com 2014-06-23T17:42:37+00:00 a36b04d7a94ae3568334d36ad9a229671fbb11ab commit 81a9c5e72bdf7109a65102ca61d8cbd722cf4021 upstream. On uniprocessor preemptible kernel, target core deadlocks on unload. The following events happen: * iscsit_del_np is called * it calls send_sig(SIGINT, np->np_thread, 1); * the scheduler switches to the np_thread * the np_thread is woken up, it sees that kthread_should_stop() returns false, so it doesn't terminate * the np_thread clears signals with flush_signals(current); and goes back to sleep in iscsit_accept_np * the scheduler switches back to iscsit_del_np * iscsit_del_np calls kthread_stop(np->np_thread); * the np_thread is waiting in iscsit_accept_np and it doesn't respond to kthread_stop The deadlock could be resolved if the administrator sends SIGINT signal to the np_thread with killall -INT iscsi_np The reproducible deadlock was introduced in commit db6077fd0b7dd41dc6ff18329cec979379071f87, but the thread-stopping code was racy even before. This patch fixes the problem. Using kthread_should_stop to stop the np_thread is unreliable, so we test np_thread_state instead. If np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 81a9c5e72bdf7109a65102ca61d8cbd722cf4021 upstream.

On uniprocessor preemptible kernel, target core deadlocks on unload. The
following events happen:
* iscsit_del_np is called
* it calls send_sig(SIGINT, np->np_thread, 1);
* the scheduler switches to the np_thread
* the np_thread is woken up, it sees that kthread_should_stop() returns
  false, so it doesn't terminate
* the np_thread clears signals with flush_signals(current); and goes back
  to sleep in iscsit_accept_np
* the scheduler switches back to iscsit_del_np
* iscsit_del_np calls kthread_stop(np->np_thread);
* the np_thread is waiting in iscsit_accept_np and it doesn't respond to
  kthread_stop

The deadlock could be resolved if the administrator sends SIGINT signal to
the np_thread with killall -INT iscsi_np

The reproducible deadlock was introduced in commit
db6077fd0b7dd41dc6ff18329cec979379071f87, but the thread-stopping code was
racy even before.

This patch fixes the problem. Using kthread_should_stop to stop the
np_thread is unreliable, so we test np_thread_state instead. If
np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iscsi-target: Explicily clear login response PDU in exception path 2014-07-07T01:57:26+00:00 Nicholas Bellinger nab@linux-iscsi.org 2014-06-17T21:54:38+00:00 2cfffbdaa8cbe4262216bf28f3eb173cfe4a91d3 commit 683497566d48f86e04d026de1ee658dd74fc1077 upstream. This patch adds a explicit memset to the login response PDU exception path in iscsit_tx_login_rsp(). This addresses a regression bug introduced in commit baa4d64b where the initiator would end up not receiving the login response and associated status class + detail, before closing the login connection. Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 683497566d48f86e04d026de1ee658dd74fc1077 upstream.

This patch adds a explicit memset to the login response PDU
exception path in iscsit_tx_login_rsp().

This addresses a regression bug introduced in commit baa4d64b
where the initiator would end up not receiving the login
response and associated status class + detail, before closing
the login connection.

Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iscsi-target: Avoid rejecting incorrect ITT for Data-Out 2014-07-07T01:57:25+00:00 Nicholas Bellinger nab@linux-iscsi.org 2014-06-20T17:59:57+00:00 7147221ab031654da334621273e88baaabcc4d03 commit 97c99b47ac58bacb7c09e1f47d5d184434f6b06a upstream. This patch changes iscsit_check_dataout_hdr() to dump the incoming Data-Out payload when the received ITT is not associated with a WRITE, instead of calling iscsit_reject_cmd() for the non WRITE ITT descriptor. This addresses a bug where an initiator sending an Data-Out for an ITT associated with a READ would end up generating a reject for the READ, eventually resulting in list corruption. Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 97c99b47ac58bacb7c09e1f47d5d184434f6b06a upstream.

This patch changes iscsit_check_dataout_hdr() to dump the incoming
Data-Out payload when the received ITT is not associated with a
WRITE, instead of calling iscsit_reject_cmd() for the non WRITE
ITT descriptor.

This addresses a bug where an initiator sending an Data-Out for
an ITT associated with a READ would end up generating a reject
for the READ, eventually resulting in list corruption.

Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
target: Fix left-over se_lun->lun_sep pointer OOPs 2014-07-07T01:57:25+00:00 Nicholas Bellinger nab@linux-iscsi.org 2014-06-16T20:25:54+00:00 a5e3c3b46fed22ce8383e0e62cd13517e1b76d88 commit 83ff42fcce070801a3aa1cd6a3269d7426271a8d upstream. This patch fixes a left-over se_lun->lun_sep pointer OOPs when one of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua* attributes is accessed after the $DEVICE symlink has been removed. To address this bug, go ahead and clear se_lun->lun_sep memory in core_dev_unexport(), so that the existing checks for show/store ALUA attributes in target_core_fabric_configfs.c work as expected. Reported-by: Sebastian Herbszt <herbszt@gmx.de> Tested-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83ff42fcce070801a3aa1cd6a3269d7426271a8d upstream.

This patch fixes a left-over se_lun->lun_sep pointer OOPs when one
of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua*
attributes is accessed after the $DEVICE symlink has been removed.

To address this bug, go ahead and clear se_lun->lun_sep memory in
core_dev_unexport(), so that the existing checks for show/store
ALUA attributes in target_core_fabric_configfs.c work as expected.

Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>