linux-stable.git/drivers/target, branch v3.10.73

target: Allow Write Exclusive non-reservation holders to READ

2015-03-26T14:01:02+00:00

commit 1ecc7586922662e3ca2f3f0c3f17fec8749fc621 upstream.

For PGR reservation of type Write Exclusive Access, allow all non
reservation holding I_T nexuses with active registrations to READ
from the device.

This addresses a bug where active registrations that attempted
to READ would result in an reservation conflict.

Signed-off-by: Lee Duncan 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Allow AllRegistrants to re-RESERVE existing reservation

2015-03-26T14:01:02+00:00

commit ae450e246e8540300699480a3780a420a028b73f upstream.

This patch changes core_scsi3_pro_release() logic to allow an
existing AllRegistrants type reservation to be re-reserved by
any registered I_T nexus.

This addresses a issue where AllRegistrants type RESERVE was
receiving RESERVATION_CONFLICT status if dev_pr_res_holder did
not match the same I_T nexus, instead of just returning GOOD
status following spc4r34 Section 5.9.9:

"If the device server receives a PERSISTENT RESERVE OUT command
 with RESERVE service action where the TYPE field and the SCOPE
 field contain the same values as the existing type and scope
 from a persistent reservation holder, it shall not make any
 change to the existing persistent reservation and shall complete
 the command with GOOD status."

Reported-by: Ilias Tsitsimpis 
Cc: Ilias Tsitsimpis 
Cc: Lee Duncan 
Cc: James Bottomley 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix R_HOLDER bit usage for AllRegistrants

2015-03-26T14:01:02+00:00

commit d16ca7c5198fd668db10d2c7b048ed3359c12c54 upstream.

This patch fixes the usage of R_HOLDER bit for an All Registrants
reservation in READ_FULL_STATUS, where only the registration who
issued RESERVE was being reported as having an active reservation.

It changes core_scsi3_pri_read_full_status() to check ahead of the
list walk of active registrations to see if All Registrants is active,
and if so set R_HOLDER bit and scope/type fields for all active
registrations.

Reported-by: Ilias Tsitsimpis 
Cc: James Bottomley 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target/pscsi: Fix NULL pointer dereference in get_device_type

2015-03-26T14:01:01+00:00

commit 215a8fe4198f607f34ecdbc9969dae783d8b5a61 upstream.

This patch fixes a NULL pointer dereference OOPs with pSCSI backends
within target_core_stat.c code.  The bug is caused by a configfs attr
read if no pscsi_dev_virt->pdv_sd has been configured.

Reported-by: Olaf Hering 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Avoid early conn_logout_comp for iser connections

2015-03-26T14:01:01+00:00

commit f068fbc82e7696d67b1bb8189306865bedf368b6 upstream.

This patch fixes a iser specific logout bug where early complete()
of conn->conn_logout_comp in iscsit_close_connection() was causing
isert_wait4logout() to complete too soon, triggering a use after
free NULL pointer dereference of iscsi_conn memory.

The complete() was originally added for traditional iscsi-target
when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given
iser-target does not wait in logout failure, this special case needs
to be avoided.

Reported-by: Sagi Grimberg 
Cc: Sagi Grimberg 
Cc: Slava Shwartsman 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Fix reference leak in target_get_sess_cmd() error path

2015-03-26T14:01:01+00:00

commit 7544e597343e2166daba3f32e4708533aa53c233 upstream.

This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down
is true within target_get_sess_cmd() submission path code.

This se_cmd reference leak can occur during active session shutdown when
ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers.

Signed-off-by: Bart Van Assche 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Check for LBA + sectors wrap-around in sbc_parse_cdb

2015-03-18T12:22:28+00:00

commit aa179935edea9a64dec4b757090c8106a3907ffa upstream.

This patch adds a check to sbc_parse_cdb() in order to detect when
an LBA + sector vs. end-of-device calculation wraps when the LBA is
sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF).

Cc: Martin Petersen 
Cc: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Drop problematic active_ts_list usage

2015-03-06T22:40:50+00:00

commit 3fd7b60f2c7418239d586e359e0c6d8503e10646 upstream.

This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code.  It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.

Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.

[   60.782534] ------------[ cut here ]------------
[   60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[   60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[   60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib]
[   60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[   60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[   60.782599]  0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[   60.782602]  ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[   60.782605]  ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[   60.782607] Call Trace:
[   60.782611]  [] dump_stack+0x49/0x62
[   60.782615]  [] warn_slowpath_common+0x8c/0xc0
[   60.782618]  [] warn_slowpath_fmt+0x46/0x50
[   60.782620]  [] __list_del_entry+0x63/0xd0
[   60.782622]  [] list_del+0x11/0x40
[   60.782630]  [] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[   60.782635]  [] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[   60.782642]  [] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[   60.782647]  [] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782652]  [] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782655]  [] kthread+0xce/0xe0
[   60.782657]  [] ? kthread_freezable_should_stop+0x70/0x70
[   60.782660]  [] ret_from_fork+0x7c/0xb0
[   60.782662]  [] ? kthread_freezable_should_stop+0x70/0x70
[   60.782663] ---[ end trace 9662f4a661d33965 ]---

Since this code is no longer used, go ahead and drop the problematic usage
all-together.

Reported-by: Gavin Guo 
Reported-by: Moussa Ba 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

target: Drop arbitrary maximum I/O size limit

2015-02-06T06:35:41+00:00

commit 046ba64285a4389ae5e9a7dfa253c6bff3d7c341 upstream.

This patch drops the arbitrary maximum I/O size limit in sbc_parse_cdb(),
which currently for fabric_max_sectors is hardcoded to 8192 (4 MB for 512
byte sector devices), and for hw_max_sectors is a backend driver dependent
value.

This limit is problematic because Linux initiators have only recently
started to honor block limits MAXIMUM TRANSFER LENGTH, and other non-Linux
based initiators (eg: MSFT Fibre Channel) can also generate I/Os larger
than 4 MB in size.

Currently when this happens, the following message will appear on the
target resulting in I/Os being returned with non recoverable status:

  SCSI OP 28h with too big sectors 16384 exceeds fabric_max_sectors: 8192

Instead, drop both [fabric,hw]_max_sector checks in sbc_parse_cdb(),
and convert the existing hw_max_sectors into a purely informational
attribute used to represent the granuality that backend driver and/or
subsystem code is splitting I/Os upon.

Also, update FILEIO with an explicit FD_MAX_BYTES check in fd_execute_rw()
to deal with the one special iovec limitiation case.

v2 changes:
  - Drop hw_max_sectors check in sbc_parse_cdb()

Reported-by: Lance Gropper 
Reported-by: Stefan Priebe 
Cc: Christoph Hellwig 
Cc: Martin K. Petersen 
Cc: Roland Dreier 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi,iser-target: Initiate termination only once

2015-02-06T06:35:41+00:00

commit 954f23722b5753305be490330cf2680b7a25f4a3 upstream.

Since commit 0fc4ea701fcf ("Target/iser: Don't put isert_conn inside
disconnected handler") we put the conn kref in isert_wait_conn, so we
need .wait_conn to be invoked also in the error path.

Introduce call to isert_conn_terminate (called under lock)
which transitions the connection state to TERMINATING and calls
rdma_disconnect. If the state is already teminating, just bail
out back (temination started).

Also, make sure to destroy the connection when getting a connect
error event if didn't get to connected (state UP). Same for the
handling of REJECTED and UNREACHABLE cma events.

Squashed:

iscsi-target: Add call to wait_conn in establishment error flow

Reported-by: Slava Shwartsman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman