linux-stable.git/drivers/target, branch linux-5.14.y

scsi: target: core: Remove from tmr_list during LUN unlink

2021-11-17T10:04:36+00:00

[ Upstream commit 12b6fcd0ea7f3cb7c3b34668fc678779924123ae ]

Currently TMF commands are removed from de_device.dev_tmf_list at the very
end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command
status (response) being queued in transport layer. This means that LUN and
backend device can be deleted in the meantime and a panic will occur:

target_tmr_work()
	cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
	transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
- // - // - // -
<<<--- lun remove
<<<--- core backend device remove
- // - // - // -
qlt_handle_abts_completion()
  tfo->free_mcmd()
    transport_generic_free_cmd()
      target_put_sess_cmd()
        core_tmr_release_req() {
          if (dev) { // backend device, can not be null
            spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH

Call Trace:
NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
Call Trace:
(unreliable)
0x0
target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
process_one_work+0x2c4/0x5c0
worker_thread+0x88/0x690

For the iSCSI protocol this is easily reproduced:

 - Send some SCSI sommand

 - Send Abort of that command over iSCSI

 - Remove LUN on target

 - Send next iSCSI command to acknowledge the Abort_Response

 - Target panics

There is no need to keep the command in tmr_list until response completion,
so move the removal from tmr_list from the response completion to the
response queueing when the LUN is unlinked.  Move the removal from state
list too as it is a subject to the same race condition.

Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com
Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Reviewed-by: Roman Bolshakov 
Reviewed-by: Mike Christie 
Signed-off-by: Dmitry Bogdanov 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: target: Fix the pgr/alua_support_store functions

2021-09-30T08:13:01+00:00

[ Upstream commit ef7ae7f746e95c6fa4ec2bcfacb949c36263da78 ]

Commit 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support
attributes writable") introduced support for changeable alua_support and
pgr_support target attributes. These can only be changed if the backstore
is user-backed, otherwise the kernel returns -EINVAL.

This triggers a warning in the targetcli/rtslib code when performing a
target restore that includes non-userbacked backstores:

  # targetctl restore
  Storage Object block/storage1: Cannot set attribute alua_support:
  [Errno 22] Invalid argument, skipped
  Storage Object block/storage1: Cannot set attribute pgr_support:
  [Errno 22] Invalid argument, skipped

Fix this warning by returning an error code only if we are really going to
flip the PGR/ALUA bit in the transport_flags field, otherwise we will do
nothing and return success.

Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be
changed, this way it will be possible for userspace to understand if the
operation failed because an invalid value has been passed to strtobool() or
because the attributes are fixed.

Fixes: 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable")
Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.com
Reviewed-by: Bodo Stroesser 
Signed-off-by: Maurizio Lombardi 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: target: Fix NULL dereference on XCOPY completion

2021-07-21T03:18:22+00:00

CPU affinity control added with commit 39ae3edda325 ("scsi: target: core:
Make completion affinity configurable") makes target_complete_cmd() queue
work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state.

LIO's EXTENDED COPY worker is a special case in that read/write cmds are
dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn
pointer following initialization in target_xcopy_setup_pt().

The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of
any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi
SCSI.ExtendedCopy.Simple test:

  BUG: kernel NULL pointer dereference, address: 00000000000001a8
  RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod]
  Call Trace:
   fd_execute_rw+0x148/0x42a [target_core_file]
   ? __dynamic_pr_debug+0xa7/0xe0
   ? target_check_reservation+0x5b/0x940 [target_core_mod]
   __target_execute_cmd+0x1e/0x90 [target_core_mod]
   transport_generic_new_cmd+0x17c/0x330 [target_core_mod]
   target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod]
   target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod]
   ? target_check_fua+0x40/0x40 [target_core_mod]
   ? transport_complete_task_attr+0x130/0x130 [target_core_mod]
   target_xcopy_do_work+0x61f/0xc00 [target_core_mod]

This fix makes target_complete_cmd() queue work on se_cmd->cpuid if
se_tpg_wwn is NULL.

Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de
Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable")
Cc: Lee Duncan 
Cc: Mike Christie 
Reviewed-by: Mike Christie 
Signed-off-by: David Disseldorp 
Signed-off-by: Martin K. Petersen

scsi: target: Fix protect handling in WRITE SAME(32)

2021-07-19T01:27:42+00:00

WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.

Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com
Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov 
Signed-off-by: Martin K. Petersen

Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block

2021-07-09T19:05:33+00:00

Pull more block updates from Jens Axboe:
 "A combination of changes that ended up depending on both the driver
  and core branch (and/or the IDE removal), and a few late arriving
  fixes. In detail:

   - Fix io ticks wrap-around issue (Chunguang)

   - nvme-tcp sock locking fix (Maurizio)

   - s390-dasd fixes (Kees, Christoph)

   - blk_execute_rq polling support (Keith)

   - blk-cgroup RCU iteration fix (Yu)

   - nbd backend ID addition (Prasanna)

   - Partition deletion fix (Yufen)

   - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)

   - Removal of now dead block request types due to IDE removal
     (Christoph)

   - Loop probing and control device cleanups (Christoph)

   - Device uevent fix (Christoph)

   - Misc cleanups/fixes (Tetsuo, Christoph)"

* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
  blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
  block: fix the problem of io_ticks becoming smaller
  nvme-tcp: can't set sk_user_data without write_lock
  loop: remove unused variable in loop_set_status()
  block: remove the bdgrab in blk_drop_partitions
  block: grab a device refcount in disk_uevent
  s390/dasd: Avoid field over-reading memcpy()
  dasd: unexport dasd_set_target_state
  block: check disk exist before trying to add partition
  ubd: remove dead code in ubd_setup_common
  nvme: use return value from blk_execute_rq()
  block: return errors from blk_execute_rq()
  nvme: use blk_execute_rq() for passthrough commands
  block: support polling through blk_execute_rq
  block: remove REQ_OP_SCSI_{IN,OUT}
  block: mark blk_mq_init_queue_data static
  loop: rewrite loop_exit using idr_for_each_entry
  loop: split loop_lookup
  loop: don't allow deleting an unspecified loop device
  loop: move loop_ctl_mutex locking into loop_add
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-07-02T22:14:36+00:00

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...

block: remove REQ_OP_SCSI_{IN,OUT}

2021-06-30T21:34:19+00:00

With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.

Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

scsi: target: iscsi: Remove redundant continue statement

2021-06-19T03:01:03+00:00

The continue statement at the end of a loop has no effect, remove it.

Link: https://lore.kernel.org/r/20210617114347.10247-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Martin K. Petersen 
Addresses-Coverity: ("Continue has no effect")

scsi: core: Introduce enums for the SAM and host status codes

2021-06-03T03:09:39+00:00

Make it possible for the compiler to verify whether SAM and host
status codes are used correctly.

[mkp: resolve conflicts with Hannes' SCSI result series]

Link: https://lore.kernel.org/r/20210524025457.11299-3-bvanassche@acm.org
Cc: Hannes Reinecke 
Reviewed-by: John Garry 
Reviewed-by: Himanshu Madhani 
Signed-off-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi: target: core: Fix warning on realtime kernels

2021-06-01T02:59:13+00:00

On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the
interrupts, a call to irqs_disabled() will return false thus firing a
warning in __transport_wait_for_tasks().

Remove the warning and also replace assert_spin_locked() with
lockdep_assert_held()

Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Maurizio Lombardi 
Signed-off-by: Martin K. Petersen