linux-stable.git/drivers/target/target_core_pr.c, branch v3.2

target: Address legacy PYX_TRANSPORT_* return code breakage

2011-12-06T06:00:49+00:00

This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number
of locations and addresses cases where transport_generic_request_failure()
was returning the incorrect sense upon CHECK_CONDITION status after the
v3.1 converson to use errno return codes.

This includes the conversion of transport_generic_request_failure() to
process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT
before calling transport_send_check_condition_and_sense() to queue up
response status.  It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy
usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response
for these cases.

transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend
SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have
all been updated to set se_cmd->scsi_sense_reason and return errno codes
universally upon failure.  This includes cmd->scsi_sense_reason assignment
in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code.

Finally it updates fabric modules to remove the legacy usage, and for
TFO->new_cmd_map() callers forwards return values outside of fabric code.
iscsi-target has also been updated to remove a handful of special cases
related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending()

(v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from
     transport_generic_new_cmd, and re-add missing task->task_error_status
     assignment in transport_complete_task)

Cc: Christoph Hellwig 
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger

target: remove SCF_EMULATE_CDB_ASYNC

2011-11-04T10:43:35+00:00

All ->execute_task instances now need to complete the I/O explicitly,
which can either happen synchronously or asynchronously.

Note that a lot of the CDB emulations appear to return success even if
some lowlevel operations failed.  Given that this is an existing issue
this patch doesn't change that fact.

(nab: Adding missing switch breaks in PR-IN + PR_OUT)

Signed-off-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target: pass the se_task to the CDB emulation callback

2011-11-04T08:00:17+00:00

We want to be able to handle all CDBs through it and remove hacks like
always using the first task in a CDB in target_report_luns.

Also rename the callback to ->execute_task to better describe its use.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target: split core_scsi3_emulate_pr

2011-11-04T08:00:17+00:00

Split core_scsi2_emulate_crh into one routine each for the
PERSISTENT_RESERVE_IN and PERSISTENT_RESERVE_OUT side.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target: split core_scsi2_emulate_crh

2011-11-04T08:00:08+00:00

Split core_scsi2_emulate_crh into one routine each for the reserve and
release side.  The common code now is in a helper called by both
routines.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target: Remove unneeded version.h includes

2011-10-11T04:10:19+00:00

It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/target/.
This patch removes them.

Signed-off-by: Jesper Juhl 
Signed-off-by: Nicholas Bellinger

target: Convert acl_node_lock to be IRQ-disabling

2011-08-22T19:28:36+00:00

With qla2xxx, acl_node_lock is taken inside qla2xxx's hardware_lock,
which is taken in hardirq context.  This means acl_node_lock must become
an IRQ-disabling lock; in particular this fixes lockdep warnings along
the lines of

    ======================================================
    [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]

     (&(&se_tpg->acl_node_lock)->rlock){+.....}, at: [] transport_deregister_session+0x92/0x140 [target_core_mod]

    and this task is already holding:
     (&(&ha->hardware_lock)->rlock){-.-...}, at: [] qla_tgt_stop_phase1+0x57/0x2c0 [qla2xxx]
    which would create a new lock dependency:
     (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->acl_node_lock)->rlock){+.....}

    but this new dependency connects a HARDIRQ-irq-safe lock:
     (&(&ha->hardware_lock)->rlock){-.-...}

    to a HARDIRQ-irq-unsafe lock:
     (&(&se_tpg->acl_node_lock)->rlock){+.....}

Signed-off-by: Roland Dreier 
Signed-off-by: Nicholas Bellinger

target: Follow up core updates from AGrover and HCH (round 4)

2011-07-22T09:37:48+00:00

This patch contains the squashed version of forth round series cleanups
from Andy and Christoph following the post heavy lifting in the preceeding:
'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather'
changes.  This also includes a conversion of target core and the v3.0
mainline fabric modules (loopback and tcm_fc) to use pr_debug and the
CONFIG_DYNAMIC_DEBUG infrastructure!

These have been squashed into this third and final round for v3.1.

target: Remove ifdeffed code in t_g_process_write
target: Remove direct ramdisk code
target: Rename task_sg_num to task_sg_nents
target: Remove custom debug macros for pr_debug. Use pr_err().
target: Remove custom debug macros in mainline fabrics
target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0
target: Remove transport do_se_mem_map callback
target: Further simplify transport_free_pages
target: Redo task allocation return value handling
target: Remove extra parentheses
target: change alloc_task call to take *cdb, not *cmd

(nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev)

Signed-off-by: Andy Grover 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target: Make all control CDBs scatter-gather

2011-07-22T09:37:48+00:00

Previously, some control CDBs did not allocate memory in pages for their
data buffer, but just did a kmalloc. This patch makes all cdbs allocate
pages.

This has the benefit of streamlining some paths that had to behave
differently when we used two allocation methods. The downside is that
all accesses to the data buffer need to kmap it before use, and need to
handle data in page-sized chunks if more than a page is needed for a given
command's data buffer.

Finally, note that cdbs with no data buffers are handled a little
differently. Before, SCSI_NON_DATA_CDBs would not call get_mem at all
(they'd be in the final else in transport_allocate_resources) but now
these will make it into generic_get_mem, but just not allocate any
buffers.

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target: Updates from AGrover and HCH (round 3)

2011-07-22T09:37:44+00:00

This patch contains a squashed version of third round series cleanups,
improvements ,and simplfications from Andy and Christoph ahead of the
heavy lifting between round 3 -> 4 for the target core SGL conversion.

This include cleanups to the main target I/O path and other miscellaneous
updates.

target: Replace custom sg<->buf functions with lib funcs
target: Simplify sector limiting code
target: get_cdb should never return NULL
target: Simplify transport_memcpy_se_mem_read_contig
target: Use assignment rather than increment for t_task_cdbs
target: Don't pass dma_size to generic_get_mem
target: Pass sg with type scatterlist in transport_map_sg_to_mem
target: Move task_sg_num next to task_sg in struct se_task
target: inline struct se_transport_task into struct se_cmd
target: Change name & semantics of transport_get_sectors()
target: Remove unused members of se_cmd
target: Rename se_cmd.t_task_cdbs to t_task_list_num
target: Fix some spelling
target: Remove unused var from transport_generic_do_tmr
target: map_sg_to_mem: return sg_count in return value
target/pscsi: Use min_t for sector limits
target/pscsi: Unused param for pscsi_get_bio()
target: Rename get_cdb_count to allocate_tasks
target: Make transport_generic_new_cmd() available for iscsi-target
target: Remove fabric callback to allocate iovecs
target: Fix transport_generic_new_cmd WRITE comment

(hch: Use __GFP_ZERO usage for alloc_pages() usage)

Signed-off-by: Andy Grover 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger