linux-stable.git/drivers/target/target_core_pr.c, branch linux-3.7.y

target: move the dereference below the NULL test

2012-09-18T01:04:14+00:00

The dereference should be moved below the NULL test.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun 
Signed-off-by: Nicholas Bellinger

target: Fix minor spelling typos in drivers/target

2012-09-18T00:13:31+00:00

Correct spelling typo in printk and comment within drivers/target.

Signed-off-by: Masanari Iida 
Signed-off-by: Nicholas Bellinger

target: report too-small parameter lists everywhere

2012-09-07T18:09:08+00:00

Several places were not checking that the parameter list length
was large enough, and thus accessing invalid memory.  Zero-length
parameter lists are just a special case of this.

Signed-off-by: Paolo Bonzini 
Signed-off-by: Nicholas Bellinger

target: Remove unneeded double parentheses

2012-07-17T00:35:22+00:00

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target: Clean up returning errors in PR handling code

2012-07-16T23:42:40+00:00

 - instead of (PTR_ERR(file) < 0) just use IS_ERR(file)
 - return -EINVAL instead of EINVAL
 - all other error returns in target_scsi3_emulate_pr_out() use
   "goto out" -- get rid of the one remaining straight "return."

Signed-off-by: Roland Dreier 
Cc: 
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2012-05-22T00:37:09+00:00

Pull scsi-target changes from Nicholas Bellinger:
 "There has been lots of work in existing code in a number of areas this
  past cycle.  The major highlights have been:

   * Removal of transport_do_task_sg_chain() from core + fabrics
     (Roland)
   * target-core: Removal of se_task abstraction from target-core and
     enforce hw_max_sectors for pSCSI backends (hch)
   * Re-factoring of iscsi-target tx immediate/response queues (agrover)
   * Conversion of iscsi-target back to using target core memory
     allocation logic (agrover)

  We've had one last minute iscsi-target patch go into for-next to
  address a nasty regression bug related to the target core allocation
  logic conversion from agrover that is not included in friday's
  linux-next build, but has been included in this series.

  On the new fabric module code front for-3.5, here is a brief status
  update for the three currently in flight this round:

   * usb-gadget target driver:

  Sebastian Siewior's driver for supporting usb-gadget target mode
  operation.  This will be going out as a separate PULL request from
  target-pending/usb-target-merge with subsystem maintainer ACKs.  There
  is one minor target-core patch in this series required to function.

   * sbp ieee-1394/firewire target driver:

  Chris Boot's driver for supportting the Serial Block Protocol (SBP)
  across IEEE-1394 Firewire hardware.  This will be going out as a
  separate PULL request from target-pending/sbp-target-merge with two
  additional drivers/firewire/ patches w/ subsystem maintainer ACKs.

   * qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx:

  The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set
  and tcm_qla2xxx fabric driver.  Support for FC target mode using
  qla2xxx LLD code has been officially submitted by Qlogic to James
  below, and is currently outstanding but not yet merged into
  scsi.git/for-next..

    [PATCH 00/22] qla2xxx: Updates for scsi "misc" branch
    http://www.spinics.net/lists/linux-scsi/msg59350.html

  Note there are *zero* direct dependencies upon this for-next series
  for the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and
  over the last days the target mode team has been tracking down an
  tcm_qla2xxx specific active I/O shutdown bug that appears to now be
  almost squashed for 3.5-rc-fixes."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (47 commits)
  iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs
  iscsi-target: remove dead code in iscsi_check_valuelist_for_support
  target: Handle ATA_16 passthrough for pSCSI backend devices
  target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
  target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
  target: add support for the WRITE_VERIFY command
  target: make target_put_session void
  target: cleanup transport_execute_tasks()
  target: Remove max_sectors device attribute for modern se_task less code
  target: lock => unlock typo in transport_lun_wait_for_tasks
  target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
  target: remove the t_se_count field in struct se_cmd
  target: remove the t_task_cdbs_ex_left field in struct se_cmd
  target: remove the t_task_cdbs_left field in struct se_cmd
  target: remove struct se_task
  target: move the state and execute lists to the command
  target: simplify command to task linkage
  target: always allocate a single task
  target: replace ->execute_task with ->execute_cmd
  target: remove the task_sectors field in struct se_task
  ...

target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups

2012-05-14T22:13:50+00:00

This patch addresses a bug in a special case for target core SPC-2 RELEASE
logic where the same physical client (eg: iSCSI InitiatorName) with
differing iSCSI session identifiers (ISID) is allowed to incorrectly release
the same client's SPC-2 reservation from the non reservation holding path.

Note this bug is specific to iscsi-target w/ SPC-2 reservations, and
with the default enforce_pr_isids=1 device attr setting in target-core
controls if a InitiatorName + different ISID reservations are handled
the same as a single iSCSI client entity.

Signed-off-by: Bernhard Kohl 
Cc: 
Signed-off-by: Nicholas Bellinger

target: replace ->execute_task with ->execute_cmd

2012-05-06T22:11:14+00:00

Make CDB emulation work on commands instead of tasks again as a preparation
of removing tasks completely.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Nicholas Bellinger

target/iscsi: Misc cleanups from Agrover (round 2)

2012-04-15T00:40:35+00:00

This patch includes the handful of squashed patches for target/iscsi from
Andy's original series into lio-core/master code:

*) Make iscsit_add_reject static
*) Remove unused data_offset_end from iscsi_datain_req
*) Remove "#if 0" stubs
*) Rename iscsi_datain_req to cmd_datain_node
*) Cleanups for built_r2ts_for_cmd()
*) Cleanups for Cleanup build_sendtargets_response()

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2012-03-22T19:38:04+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "This contains the usual set of updates and bugfixes to target-core +
  existing fabric module code, along with a handful of the patches
  destined for v3.3 stable.

  It also contains the necessary target-core infrastructure pieces
  required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre
  Channel fabric module currently queued in target-pending/for-next-merge,
  and coming for round 2.

  The highlights for this series include:

   - Add target_submit_tmr() helper function for fabric task management
     (andy)
   - Convert tcm_fc to use target_submit_tmr() (andy)
   - Replace target core various cmd flags with a transport state (hch)
   - Convert loopback to use workqueue submission (hch)
   - Convert target core to use array_zalloc for tpg_lun_list (joern)
   - Convert target core to use array_zalloc for device_list (joern)
   - Add target core support for TMR_ABORT_TASK (nab)
   - Add target core se_sess->sess_kref + get/put helpers (nab)
   - Add target core se_node_acl->acl_kref for ->acl_free_comp usage
     (nab)
   - Convert iscsi-target to use target_put_session + sess_kref (nab)
   - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab)
   - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on
     exception (nab)
   - Fix target core up handling of short INQUIRY buffers (roland)
   - Untangle target-core front-end and back-end meanings of max_sectors
     attribute (roland)
   - Set loopback residual field for SCSI commands (roland)
   - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS
     emulation (roland)

  Thanks again to Andy, Christoph, Joern, Roland, and everyone who has
  contributed this round!"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits)
  ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception
  loopback: Fix transport_generic_allocate_tasks error handling
  iscsi-target: remove improper externs
  iscsi-target: Remove unused variables in iscsi_target_parameters.c
  target: remove obvious warnings
  target: Use array_zalloc for device_list
  target: Use array_zalloc for tpg_lun_list
  target: Fix sense code for unsupported SERVICE ACTION IN
  target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled
  target: Bump core version to v4.1.0-rc2-ml + fabric versions
  tcm_fc: Fix fc_exch memory leak in ft_send_resp_status
  target: Drop unused legacy target_core_fabric_ops API callers
  iscsi-target: Convert to use target_put_session + sess_kref
  target: Convert se_node_acl->acl_group removal to use ->acl_kref
  target: Add se_node_acl->acl_kref for ->acl_free_comp usage
  target: Add se_node_acl->acl_free_comp for NodeACL release path
  target: Add se_sess->sess_kref + get/put helpers
  target: Convert session_lock to irqsave
  target: Fix typo in drivers/target
  iscsi-target: Fix dynamic -> explict NodeACL pointer reference
  ...