linux-stable.git/drivers/target/iscsi, branch v3.16

iscsi-target: fix iscsit_del_np deadlock on unload

2014-06-28T06:23:35+00:00

On uniprocessor preemptible kernel, target core deadlocks on unload. The
following events happen:
* iscsit_del_np is called
* it calls send_sig(SIGINT, np->np_thread, 1);
* the scheduler switches to the np_thread
* the np_thread is woken up, it sees that kthread_should_stop() returns
  false, so it doesn't terminate
* the np_thread clears signals with flush_signals(current); and goes back
  to sleep in iscsit_accept_np
* the scheduler switches back to iscsit_del_np
* iscsit_del_np calls kthread_stop(np->np_thread);
* the np_thread is waiting in iscsit_accept_np and it doesn't respond to
  kthread_stop

The deadlock could be resolved if the administrator sends SIGINT signal to
the np_thread with killall -INT iscsi_np

The reproducible deadlock was introduced in commit
db6077fd0b7dd41dc6ff18329cec979379071f87, but the thread-stopping code was
racy even before.

This patch fixes the problem. Using kthread_should_stop to stop the
np_thread is unreliable, so we test np_thread_state instead. If
np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger

iscsi-target: Avoid rejecting incorrect ITT for Data-Out

2014-06-27T18:47:57+00:00

This patch changes iscsit_check_dataout_hdr() to dump the incoming
Data-Out payload when the received ITT is not associated with a
WRITE, instead of calling iscsit_reject_cmd() for the non WRITE
ITT descriptor.

This addresses a bug where an initiator sending an Data-Out for
an ITT associated with a READ would end up generating a reject
for the READ, eventually resulting in list corruption.

Reported-by: Santosh Kulkarni 
Reported-by: Arshad Hussain 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

iscsi-target: Explicily clear login response PDU in exception path

2014-06-27T03:56:49+00:00

This patch adds a explicit memset to the login response PDU
exception path in iscsit_tx_login_rsp().

This addresses a regression bug introduced in commit baa4d64b
where the initiator would end up not receiving the login
response and associated status class + detail, before closing
the login connection.

Reported-by: Christophe Vu-Brugier 
Tested-by: Christophe Vu-Brugier 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

iscsi-target; Enforce 1024 byte maximum for CHAP_C key value

2014-06-27T03:56:42+00:00

This patch adds a check in chap_server_compute_md5() to enforce a
1024 byte maximum for the CHAP_C key value following the requirement
in RFC-3720 Section 11.1.4:

   "..., C and R are large-binary-values and their binary length (not
   the length of the character string that represents them in encoded
   form) MUST not exceed 1024 bytes."

Reported-by: rahul.rane 
Tested-by: rahul.rane 
Signed-off-by: Nicholas Bellinger

iscsi-target: Convert chap_server_compute_md5 to use kstrtoul

2014-06-27T03:56:42+00:00

This patch converts chap_server_compute_md5() from simple_strtoul() to
kstrtoul usage().

This addresses the case where a empty 'CHAP_I=' key value received during
mutual authentication would be converted to a '0' by simple_strtoul(),
instead of failing the login attempt.

Reported-by: Tejas Vaykole 
Tested-by: Tejas Vaykole 
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-06-13T05:38:32+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Add support for T10 PI pass-through between vhost-scsi +
     virtio-scsi (MST + Paolo + MKP + nab)
   - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch +
     nab, merged through scsi.git)
   - Add support for percpu-ida pre-allocation in qla2xxx target code
     (Quinn + nab)
   - A number of iser-target fixes related to hardening the network
     portal shutdown path (Sagi + Slava)
   - Fix response length residual handling for a number of control CDBs
     (Roland + Christophe V.)
   - Various iscsi RFC conformance fixes in the CHAP authentication path
     (Tejas and Calsoft folks + nab)
   - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response
     failures (Vasu + Jun + nab)
   - Fix long-standing ABORT_TASK + session reset hang (nab)
   - Convert iser-initiator + iser-target to include T10 bytes into EDTL
     (Sagi + Or + MKP + Mike Christie)
   - Fix NULL pointer dereference regression related to XCOPY introduced
     in v3.15 + CC'ed to v3.12.y (nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits)
  target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd
  vhost-scsi: Include prot_bytes into expected data transfer length
  TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire
  libiscsi, iser: Adjust data_length to include protection information
  scsi_cmnd: Introduce scsi_transfer_length helper
  target: Report correct response length for some commands
  target/sbc: Check that the LBA and number of blocks are correct in VERIFY
  target/sbc: Remove sbc_check_valid_sectors()
  Target/iscsi: Fix sendtargets response pdu for iser transport
  Target/iser: Fix a wrong dereference in case discovery session is over iser
  iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak
  target: Use complete_all for se_cmd->t_transport_stop_comp
  target: Set CMD_T_ACTIVE bit for Task Management Requests
  target: cleanup some boolean tests
  target/spc: Simplify INQUIRY EVPD=0x80
  tcm_fc: Generate TASK_SET_FULL status for response failures
  tcm_fc: Generate TASK_SET_FULL status for DataIN failures
  iscsi-target: Reject mutual authentication with reflected CHAP_C
  iscsi-target: Remove no-op from iscsit_tpg_del_portal_group
  iscsi-target: Fix CHAP_A parameter list handling
  ...

Target/iscsi: Fix sendtargets response pdu for iser transport

2014-06-11T18:52:39+00:00

In case the transport is iser we should not include the
iscsi target info in the sendtargets text response pdu.
This causes sendtargets response to include the target
info twice.

Modify iscsit_build_sendtargets_response to filter
transport types that don't match.

Signed-off-by: Sagi Grimberg 
Reported-by: Slava Shwartsman 
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Nicholas Bellinger

iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak

2014-06-10T04:20:57+00:00

This patch fixes a iscsi_queue_req memory leak when ABORT_TASK response
has been queued by TFO->queue_tm_rsp() -> lio_queue_tm_rsp() after a
long standing I/O completes, but the connection has already reset and
waiting for cleanup to complete in iscsit_release_commands_from_conn()
-> transport_generic_free_cmd() -> transport_wait_for_tasks() code.

It moves iscsit_free_queue_reqs_for_conn() after the per-connection command
list has been released, so that the associated se_cmd tag can be completed +
released by target-core before freeing any remaining iscsi_queue_req memory
for the connection generated by lio_queue_tm_rsp().

Cc: Thomas Glanzmann 
Cc: Charalampos Pournaris 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

target: cleanup some boolean tests

2014-06-06T21:21:01+00:00

Convert "x == true" to "x" and "x == false" to "!x".

Signed-off-by: Christophe Vu-Brugier 
Signed-off-by: Nicholas Bellinger

iscsi-target: Reject mutual authentication with reflected CHAP_C

2014-06-06T02:45:01+00:00

This patch adds an explicit check in chap_server_compute_md5() to ensure
the CHAP_C value received from the initiator during mutual authentication
does not match the original CHAP_C provided by the target.

This is in line with RFC-3720, section 8.2.1:

   Originators MUST NOT reuse the CHAP challenge sent by the Responder
   for the other direction of a bidirectional authentication.
   Responders MUST check for this condition and close the iSCSI TCP
   connection if it occurs.

Reported-by: Tejas Vaykole 
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Nicholas Bellinger