linux-stable.git/drivers/target/iscsi, branch linux-4.12.y

iscsi-target: Fix iscsi_np reset hung task during parallel delete

2017-08-16T20:46:51+00:00

commit 978d13d60c34818a41fc35962602bdfa5c03f214 upstream.

This patch fixes a bug associated with iscsit_reset_np_thread()
that can occur during parallel configfs rmdir of a single iscsi_np
used across multiple iscsi-target instances, that would result in
hung task(s) similar to below where configfs rmdir process context
was blocked indefinately waiting for iscsi_np->np_restart_comp
to finish:

[ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds.
[ 6726.119440]       Tainted: G        W  O     4.1.26-3321 #2
[ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88     0 15550      1 0x00000000
[ 6726.140058]  ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08
[ 6726.147593]  ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0
[ 6726.155132]  ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8
[ 6726.162667] Call Trace:
[ 6726.165150]  [] schedule+0x32/0x80
[ 6726.170156]  [] schedule_timeout+0x214/0x290
[ 6726.176030]  [] ? __send_signal+0x52/0x4a0
[ 6726.181728]  [] wait_for_completion+0x96/0x100
[ 6726.187774]  [] ? wake_up_state+0x10/0x10
[ 6726.193395]  [] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod]
[ 6726.201278]  [] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod]
[ 6726.210033]  [] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod]
[ 6726.218351]  [] configfs_write_file+0xaa/0x110
[ 6726.224392]  [] vfs_write+0xa4/0x1b0
[ 6726.229576]  [] SyS_write+0x41/0xb0
[ 6726.234659]  [] system_call_fastpath+0x12/0x71

It would happen because each iscsit_reset_np_thread() sets state
to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting
for completion on iscsi_np->np_restart_comp.

However, if iscsi_np was active processing a login request and
more than a single iscsit_reset_np_thread() caller to the same
iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np
kthread process context in __iscsi_target_login_thread() would
flush pending signals and only perform a single completion of
np->np_restart_comp before going back to sleep within transport
specific iscsit_transport->iscsi_accept_np code.

To address this bug, add a iscsi_np->np_reset_count and update
__iscsi_target_login_thread() to keep completing np->np_restart_comp
until ->np_reset_count has reached zero.

Reported-by: Gary Guo 
Tested-by: Gary Guo 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: fix memory leak in iscsit_setup_text_cmd()

2017-08-16T20:46:50+00:00

commit ea8dc5b4cd2195ee582cae28afa4164c6dea1738 upstream.

On receiving text request iscsi-target allocates buffer for
payload in iscsit_handle_text_cmd() and assigns buffer pointer
to cmd->text_in_ptr, this buffer is currently freed in
iscsit_release_cmd(), if iscsi-target sets 'C' bit in text
response then it will receive another text request from the
initiator with ttt != 0xffffffff in this case iscsi-target
will find cmd using itt and call iscsit_setup_text_cmd()
which will set cmd->text_in_ptr to NULL without freeing
previously allocated buffer.

This patch fixes this issue by calling kfree(cmd->text_in_ptr)
in iscsit_setup_text_cmd() before assigning NULL to it.

For the first text request cmd->text_in_ptr is NULL as
cmd is memset to 0 in iscsit_allocate_cmd().

Signed-off-by: Varun Prakash 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Add login_keys_workaround attribute for non RFC initiators

2017-07-27T22:10:08+00:00

commit 138d351eefb727ab9e41a3dc5f112ceb4f6e59f2 upstream.

This patch re-introduces part of a long standing login workaround that
was recently dropped by:

  commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46
  Author: Nicholas Bellinger 
  Date:   Sun Apr 2 13:36:44 2017 -0700

      iscsi-target: Drop work-around for legacy GlobalSAN initiator

Namely, the workaround for FirstBurstLength ended up being required by
Mellanox Flexboot PXE boot ROMs as reported by Robert.

So this patch re-adds the work-around for FirstBurstLength within
iscsi_check_proposer_for_optional_reply(), and makes the key optional
to respond when the initiator does not propose, nor respond to it.

Also as requested by Arun, this patch introduces a new TPG attribute
named 'login_keys_workaround' that controls the use of both the
FirstBurstLength workaround, as well as the two other existing
workarounds for gPXE iSCSI boot client.

By default, the workaround is enabled with login_keys_workaround=1,
since Mellanox FlexBoot requires it, and Arun has verified the Qlogic
MSFT initiator already proposes FirstBurstLength, so it's uneffected
by this re-adding this part of the original work-around.

Reported-by: Robert LeBlanc 
Cc: Robert LeBlanc 
Reviewed-by: Arun Easi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Reject immediate data underflow larger than SCSI transfer length

2017-06-09T05:25:29+00:00

When iscsi WRITE underflow occurs there are two different scenarios
that can happen.

Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.

That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL.  In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.

However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.

In the wild, we've never had a iscsi host environment actually
try to do this.

For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.

Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:

   commit c72c5250224d475614a00c1d7e54a67f77cd3410
   Author: Roland Dreier 
   Date:   Wed Jul 22 15:08:18 2015 -0700

      target: allow underflow/overflow for PR OUT etc. commands

Cc: Roland Dreier 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Martin K. Petersen 
Cc:  # v4.3+
Signed-off-by: Nicholas Bellinger

iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP

2017-06-09T05:25:14+00:00

This patch fixes a BUG() in iscsit_close_session() that could be
triggered when iscsit_logout_post_handler() execution from within
tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP
(15 seconds), and the TCP connection didn't already close before
then forcing tx thread context to automatically exit.

This would manifest itself during explicit logout as:

[33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179
[33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs
[33209.078643] ------------[ cut here ]------------
[33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346!

Normally when explicit logout attempt fails, the tx thread context
exits and iscsit_close_connection() from rx thread context does the
extra cleanup once it detects conn->conn_logout_remove has not been
cleared by the logout type specific post handlers.

To address this special case, if the logout post handler in tx thread
context detects conn->tx_thread_active has already been cleared, simply
return and exit in order for existing iscsit_close_connection()
logic from rx thread context do failed logout cleanup.

Reported-by: Bart Van Assche 
Tested-by: Bart Van Assche 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: stable@vger.kernel.org # 3.14+
Tested-by: Gary Guo 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger

iscsi-target: Always wait for kthread_should_stop() before kthread exit

2017-05-31T22:12:57+00:00

There are three timing problems in the kthread usages of iscsi_target_mod:

 - np_thread of struct iscsi_np
 - rx_thread and tx_thread of struct iscsi_conn

In iscsit_close_connection(), it calls

 send_sig(SIGINT, conn->tx_thread, 1);
 kthread_stop(conn->tx_thread);

In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().

So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.

This is invalid according to the documentation of kthread_stop().

(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
 early iscsi_target_rx_thread failure case - nab)

Signed-off-by: Jiang Yi 
Cc:  # v3.12+
Signed-off-by: Nicholas Bellinger

iscsi-target: Fix initial login PDU asynchronous socket close OOPs

2017-05-31T22:12:31+00:00

This patch fixes a OOPs originally introduced by:

   commit bb048357dad6d604520c91586334c9c230366a14
   Author: Nicholas Bellinger 
   Date:   Thu Sep 5 14:54:04 2013 -0700

   iscsi-target: Add sk->sk_state_change to cleanup after TCP failure

which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.

To address this issue, this patch makes the following changes.

First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.

Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running.  For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().

The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed.  For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.

Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.

Reported-by: Mike Christie 
Reviewed-by: Mike Christie 
Tested-by: Mike Christie 
Cc: Mike Christie 
Reported-by: Hannes Reinecke 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: Varun Prakash 
Cc:  # v3.12+
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2017-05-12T18:44:13+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "Things were a lot more calm than previously expected. It's primarily
  fixes in various areas, with most of the new functionality centering
  around TCMU backend driver work that Xiubo Li has been driving.

  Here's the summary on the feature side:

   - Make T10-PI verify configurable for emulated (FILEIO + RD) backends
    (Dmitry Monakhov)
   - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic
    (Bryant Ly + MNC)
   - Add TCMU support for growing ring buffer size (Xiubo Li + MNC)
   - Add TCMU support for global block data pool (Xiubo Li + MNC)

  and on the bug-fix side:

   - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase
    failures (Gary Guo + nab)
   - Fix iscsi-target hang with explicitly changing per NodeACL
    CmdSN number depth with concurrent login driven session
    reinstatement.  (Gary Guo + nab)
   - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly)
   - Fix target-core/FILEIO zero length handling (Bart Van Assche)

  Also, there was an OOPs introduced with the WRITE_VERIFY changes that
  I ended up reverting at the last minute, because as not unusual Bart
  and I could not agree on the fix in time for -rc1. Since it's specific
  to a conformance test, it's been reverted for now.

  There is a separate patch in the queue to address the underlying
  control CDB write overflow regression in >= v4.3 separate from the
  WRITE_VERIFY revert here, that will be pushed post -rc1"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits)
  Revert "target: Fix VERIFY and WRITE VERIFY command parsing"
  IB/srpt: Avoid that aborting a command triggers a kernel warning
  IB/srpt: Fix abort handling
  target/fileio: Fix zero-length READ and WRITE handling
  ibmvscsis: Do not send aborted task response
  tcmu: fix module removal due to stuck thread
  target: Don't force session reset if queue_depth does not change
  iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement
  target: Fix compare_and_write_callback handling for non GOOD status
  tcmu: Recalculate the tcmu_cmd size to save cmd area memories
  tcmu: Add global data block pool support
  tcmu: Add dynamic growing data area feature support
  target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store()
  target: fixup error message in target_tg_pt_gp_alua_access_type_store()
  target/user: PGR Support
  target: Add WRITE_VERIFY_16
  Documentation/target: add an example script to configure an iSCSI target
  target: Use kmalloc_array() in transport_kmap_data_sg()
  target: Use kmalloc_array() in compare_and_write_callback()
  target: Improve size determinations in two functions
  ...

iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement

2017-05-05T03:01:39+00:00

While testing modification of per se_node_acl queue_depth forcing
session reinstatement via lio_target_nacl_cmdsn_depth_store() ->
core_tpg_set_initiator_node_queue_depth(), a hung task bug triggered
when changing cmdsn_depth invoked session reinstatement while an iscsi
login was already waiting for session reinstatement to complete.

This can happen when an outstanding se_cmd descriptor is taking a
long time to complete, and session reinstatement from iscsi login
or cmdsn_depth change occurs concurrently.

To address this bug, explicitly set session_fall_back_to_erl0 = 1
when forcing session reinstatement, so session reinstatement is
not attempted if an active session is already being shutdown.

This patch has been tested with two scenarios.  The first when
iscsi login is blocked waiting for iscsi session reinstatement
to complete followed by queue_depth change via configfs, and
second when queue_depth change via configfs us blocked followed
by a iscsi login driven session reinstatement.

Note this patch depends on commit d36ad77f702 to handle multiple
sessions per se_node_acl when changing cmdsn_depth, and for
pre v4.5 kernels will need to be included for stable as well.

Reported-by: Gary Guo 
Tested-by: Gary Guo 
Cc: Gary Guo 
Cc:  # v4.1+
Signed-off-by: Nicholas Bellinger

iscsi-target: Improve size determinations in four functions

2017-05-02T05:21:08+00:00

Replace the specification of four data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determinations a bit safer according to the Linux coding style convention.

Signed-off-by: Markus Elfring 
Signed-off-by: Nicholas Bellinger