linux-stable.git/drivers/target/iscsi, branch linux-3.12.y

iscsi-target: Drop work-around for legacy GlobalSAN initiator

2017-04-28T17:30:44+00:00

commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46 upstream.

Once upon a time back in 2009, a work-around was added to support
the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login
did not propose nor respond to MaxBurstLength, FirstBurstLength,
DefaultTime2Wait and DefaultTime2Retain keys.

The work-around in iscsi_check_proposer_for_optional_reply()
allowed the missing keys to be proposed, but did not require
waiting for a response before moving to full feature phase
operation.  This allowed GlobalSAN v3.3 to work out-of-the
box, and for many years we didn't run into login interopt
issues with any other initiators..

Until recently, when Martin tried a QLogic 57840S iSCSI Offload
HBA on Windows 2016 which completed login, but subsequently
failed with:

    Got unknown iSCSI OpCode: 0x43

The issue was QLogic MSFT side did not propose DefaultTime2Wait +
DefaultTime2Retain, so LIO proposes them itself, and immediately
transitions to full feature phase because of the GlobalSAN hack.
However, the QLogic MSFT side still attempts to respond to
DefaultTime2Retain + DefaultTime2Wait, even though LIO has set
ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT
in last login response.

So while the QLogic MSFT side should have been proposing these
two keys to start, it was doing the correct thing per RFC-3720
attempting to respond to proposed keys before transitioning to
full feature phase.

All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541)
does correctly propose the four keys during login, making the
original work-around moot.

So in order to allow QLogic MSFT to run unmodified as-is, go
ahead and drop this long standing work-around.

Reported-by: Martin Svec 
Cc: Martin Svec 
Cc: Himanshu Madhani 
Cc: Arun Easi 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi-target: Fix TMR reference leak during session shutdown

2017-04-28T17:30:43+00:00

commit efb2ea770bb3b0f40007530bc8b0c22f36e1c5eb upstream.

This patch fixes a iscsi-target specific TMR reference leak
during session shutdown, that could occur when a TMR was
quiesced before the hand-off back to iscsi-target code
via transport_cmd_check_stop_to_fabric().

The reference leak happens because iscsit_free_cmd() was
incorrectly skipping the final target_put_sess_cmd() for
TMRs when transport_generic_free_cmd() returned zero because
the se_cmd->cmd_kref did not reach zero, due to the missing
se_cmd assignment in original code.

The result was iscsi_cmd and it's associated se_cmd memory
would be freed once se_sess->sess_cmd_map where released,
but the associated se_tmr_req was leaked and remained part
of se_device->dev_tmr_list.

This bug would manfiest itself as kernel paging request
OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req
attempted to dereference it's se_cmd pointer that had
already been released during normal session shutdown.

To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD
and ISCSI_OP_SCSI_TMFUNC the same when there is an extra
se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use
op_scsi to signal __iscsit_free_cmd() when the former
needs to clear any further iscsi related I/O state.

Reported-by: Rob Millner 
Cc: Rob Millner 
Reported-by: Chu Yuan Lin 
Cc: Chu Yuan Lin 
Tested-by: Chu Yuan Lin 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

target/iscsi: Fix double free in lio_target_tiqn_addtpg()

2017-01-26T16:40:16+00:00

commit a91918cd3ea11f91c68e08e1e8ce1b560447a80e upstream.

This iscsit_tpg_add_portal_group() function is only called from
lio_target_tiqn_addtpg().  Both functions free the "tpg" pointer on
error so it's a double free bug.  The memory is allocated in the caller
so it should be freed in the caller and not here.

Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Dan Carpenter 
Reviewed-by: David Disseldorp 
[ bvanassche: Added "Fix" at start of patch title ]
Signed-off-by: Bart Van Assche 
Signed-off-by: Jiri Slaby

iscsi-target: Fix potential dead-lock during node acl delete

2016-02-24T09:23:27+00:00

commit 26a99c19f810b2593410899a5b304b21b47428a6 upstream.

This patch is a iscsi-target specific bug-fix for a dead-lock
that can occur during explicit struct se_node_acl->acl_group
se_session deletion via configfs rmdir(2), when iscsi-target
time2retain timer is still active.

It changes iscsi-target to obtain se_portal_group->session_lock
internally using spin_in_locked() to check for the specific
se_node_acl configfs shutdown rmdir(2) case.

Note this patch is intended for stable, and the subsequent
v4.5-rc patch converts target_core_tpg.c to use proper
se_sess->sess_kref reference counting for both se_node_acl
deletion + se_node_acl->queue_depth se_session restart.

Reported-by:: Sagi Grimberg 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Andy Grover 
Cc: Mike Christie 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi-target: Fix rx_login_comp hang after login failure

2016-02-24T09:23:25+00:00

commit ca82c2bded29b38d36140bfa1e76a7bbfcade390 upstream.

This patch addresses a case where iscsi_target_do_tx_login_io()
fails sending the last login response PDU, after the RX/TX
threads have already been started.

The case centers around iscsi_target_rx_thread() not invoking
allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs
from the failure path, resulting in RX thread hanging
indefinately on iscsi_conn->rx_login_comp.

Note this bug is a regression introduced by:

  commit e54198657b65625085834847ab6271087323ffea
  Author: Nicholas Bellinger 
  Date:   Wed Jul 22 23:14:19 2015 -0700

      iscsi-target: Fix iscsit_start_kthreads failure OOPs

To address this bug, complete ->rx_login_complete for good
measure in the failure path, and immediately return from
RX thread context if connection state did not actually reach
full feature phase (TARG_CONN_STATE_LOGGED_IN).

Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi-target: Fix iscsit_start_kthreads failure OOPs

2015-08-25T14:56:54+00:00

commit e54198657b65625085834847ab6271087323ffea upstream.

This patch fixes a regression introduced with the following commit
in v4.0-rc1 code, where a iscsit_start_kthreads() failure triggers
a NULL pointer dereference OOPs:

    commit 88dcd2dab5c23b1c9cfc396246d8f476c872f0ca
    Author: Nicholas Bellinger 
    Date:   Thu Feb 26 22:19:15 2015 -0800

        iscsi-target: Convert iscsi_thread_set usage to kthread.h

To address this bug, move iscsit_start_kthreads() immediately
preceeding the transmit of last login response, before signaling
a successful transition into full-feature-phase within existing
iscsi_target_do_tx_login_io() logic.

This ensures that no target-side resource allocation failures can
occur after the final login response has been successfully sent.

Also, it adds a iscsi_conn->rx_login_comp to allow the RX thread
to sleep to prevent other socket related failures until the final
iscsi_post_login_handler() call is able to complete.

Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi-target: Fix iser explicit logout TX kthread leak

2015-08-19T06:36:44+00:00

commit 007d038bdf95ccfe2491d0078be54040d110fd06 upstream.

This patch fixes a regression introduced with the following commit
in v4.0-rc1 code, where an explicit iser-target logout would result
in ->tx_thread_active being incorrectly cleared by the logout post
handler, and subsequent TX kthread leak:

    commit 88dcd2dab5c23b1c9cfc396246d8f476c872f0ca
    Author: Nicholas Bellinger 
    Date:   Thu Feb 26 22:19:15 2015 -0800

        iscsi-target: Convert iscsi_thread_set usage to kthread.h

To address this bug, change iscsit_logout_post_handler_closesession()
and iscsit_logout_post_handler_samecid() to only cmpxchg() on
->tx_thread_active for traditional iscsi/tcp connections.

This is required because iscsi/tcp connections are invoking logout
post handler logic directly from TX kthread context, while iser
connections are invoking logout post handler logic from a seperate
workqueue context.

Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi-target: Fix use-after-free during TPG session shutdown

2015-08-19T06:36:44+00:00

commit 417c20a9bdd1e876384127cf096d8ae8b559066c upstream.

This patch fixes a use-after-free bug in iscsit_release_sessions_for_tpg()
where se_portal_group->session_lock was incorrectly released/re-acquired
while walking the active se_portal_group->tpg_sess_list.

The can result in a NULL pointer dereference when iscsit_close_session()
shutdown happens in the normal path asynchronously to this code, causing
a bogus dereference of an already freed list entry to occur.

To address this bug, walk the session list checking for the same state
as before, but move entries to a local list to avoid dropping the lock
while walking the active list.

As before, signal using iscsi_session->session_restatement=1 for those
list entries to be released locally by iscsit_free_session() code.

Reported-by: Sunilkumar Nadumuttlu 
Cc: Sunilkumar Nadumuttlu 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi-target: Convert iscsi_thread_set usage to kthread.h

2015-08-04T14:52:27+00:00

commit 88dcd2dab5c23b1c9cfc396246d8f476c872f0ca upstream.

This patch converts iscsi-target code to use modern kthread.h API
callers for creating RX/TX threads for each new iscsi_conn descriptor,
and releasing associated RX/TX threads during connection shutdown.

This is done using iscsit_start_kthreads() -> kthread_run() to start
new kthreads from within iscsi_post_login_handler(), and invoking
kthread_stop() from existing iscsit_close_connection() code.

Also, convert iscsit_logout_post_handler_closesession() code to use
cmpxchg when determing when iscsit_cause_connection_reinstatement()
needs to sleep waiting for completion.

Reported-by: Sagi Grimberg 
Tested-by: Sagi Grimberg 
Cc: Slava Shwartsman 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

iscsi target: fix oops when adding reject pdu

2015-04-22T06:58:46+00:00

commit b815fc12d4dd2b5586184fb4f867caff05a810d4 upstream.

This fixes a oops due to a double list add when adding a reject PDU for
iscsit_allocate_iovecs allocation failures. The cmd has already been
added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call
iscsit_reject_cmd.

Note that for ERL0 the reject PDU is not actually sent, so this patch
is not completely tested. Just verified we do not oops. The problem is the
add reject functions return -1 which is returned all the way up to
iscsi_target_rx_thread which for ERL0 will drop the connection.

Signed-off-by: Mike Christie 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby