linux-stable.git/drivers/staging, branch v5.6.2

staging: wfx: annotate nested gc_list vs tx queue locking

2020-04-01T08:58:16+00:00

commit e2525a95cc0887c7dc0549cb5d0ac3e796e1d54c upstream.

Lockdep is complaining about recursive locking, because it can't make
a difference between locked skb_queues. Annotate nested locks and avoid
double bh_disable/enable.

[...]
insmod/815 is trying to acquire lock:
cb7d6418 (&(&list->lock)->rlock){+...}, at: wfx_tx_queues_clear+0xfc/0x198 [wfx]

but task is already holding lock:
cb7d61f4 (&(&list->lock)->rlock){+...}, at: wfx_tx_queues_clear+0xa0/0x198 [wfx]

[...]
Possible unsafe locking scenario:

      CPU0
      ----
 lock(&(&list->lock)->rlock);
 lock(&(&list->lock)->rlock);

Cc: stable@vger.kernel.org
Fixes: 9bca45f3d692 ("staging: wfx: allow to send 802.11 frames")
Signed-off-by: Michał Mirosław 
Link: https://lore.kernel.org/r/5e30397af95854b4a7deea073b730c00229f42ba.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman

staging: wfx: fix init/remove vs IRQ race

2020-04-01T08:58:15+00:00

commit 4033714d6cbe04893aa0708d1fcaa45dd8eb3f53 upstream.

Current code races in init/exit with interrupt handlers. This is noticed
by the warning below. Fix it by using devres for ordering allocations and
IRQ de/registration.

WARNING: CPU: 0 PID: 827 at drivers/staging/wfx/bus_spi.c:142 wfx_spi_irq_handler+0x5c/0x64 [wfx]
race condition in driver init/deinit

Cc: stable@vger.kernel.org
Fixes: 0096214a59a7 ("staging: wfx: add support for I/O access")
Signed-off-by: Michał Mirosław 
Reviewed-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/f0c66cbb3110c2736cd4357c753fba8c14ee3aee.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman

staging: wfx: add proper "compatible" string

2020-04-01T08:58:15+00:00

commit eec6e3ee636ec3adaa85ebe4b4acaacfcf06277e upstream.

Add "compatible" string matching "vendor,chip" template and proper
GPIO flags handling. Keep support for old name and reset polarity
for older devicetrees.

Cc: stable@vger.kernel.org   # d3a5bcb4a17f ("gpio: add gpiod_toggle_active_low()")
Cc: stable@vger.kernel.org
Fixes: 0096214a59a7 ("staging: wfx: add support for I/O access")
Signed-off-by: Michał Mirosław 
Link: https://lore.kernel.org/r/0e6dda06f145676861860f073a53dc95987c7ab5.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman

staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback

2020-04-01T08:58:15+00:00

commit 1165dd73e811a07d947aee218510571f516081f6 upstream.

We can't handle the case length > WLAN_DATA_MAXLEN.
Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't
read more than that.

Thanks-to: Hillf Danton 
Reported-and-tested-by: syzbot+7d42d68643a35f71ac8a@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang 
Cc: stable 
Link: https://lore.kernel.org/r/20200326131850.17711-1-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman

staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb

2020-04-01T08:58:14+00:00

commit a1f165a6b738f0c9d744bad4af7a53909278f5fc upstream.

We should cancel hw->usb_work before kfree(hw).

Reported-by: syzbot+6d2e7f6fa90e27be9d62@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang 
Cc: stable 
Link: https://lore.kernel.org/r/1585120006-30042-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman

staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table

2020-04-01T08:58:14+00:00

commit 38ef48f7d4b7342f145a1b4f96023bde99aeb245 upstream.

The ASUS USB-N10 Nano B1 has been reported as a new RTL8188EU device.
Add it to the device tables.

Signed-off-by: Larry Finger 
Reported-by: kovi 
Cc: Stable 
Link: https://lore.kernel.org/r/20200321180011.26153-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman

staging: kpc2000: prevent underflow in cpld_reconfigure()

2020-04-01T08:58:14+00:00

commit 72db61d7d17a475d3cc9de1a7c871d518fcd82f0 upstream.

This function should not allow negative values of "wr_val".  If
negatives are allowed then capping the upper bound at 7 is
meaningless.  Let's make it unsigned.

Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers")
Signed-off-by: Dan Carpenter 
Cc: stable 
Link: https://lore.kernel.org/r/20200224103325.hrxdnaeqsthplu42@kili.mountain
Signed-off-by: Greg Kroah-Hartman

Merge tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2020-03-20T16:20:38+00:00

Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for 5.6-rc7

  Nothing major here, just resolutions for some reported problems:
   - iio bugfixes for a number of different drivers
   - greybus loopback_test fixes
   - wfx driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
  staging: greybus: loopback_test: fix potential path truncations
  staging: greybus: loopback_test: fix potential path truncation
  staging: greybus: loopback_test: fix poll-mask build breakage
  staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
  staging: wfx: fix RCU usage in wfx_join_finalize()
  staging: wfx: make warning about pending frame less scary
  staging: wfx: fix lines ending with a comma instead of a semicolon
  staging: wfx: fix warning about freeing in-use mutex during device unregister
  staging/speakup: fix get_word non-space look-ahead
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

staging: rtl8188eu: Add device id for MERCUSYS MW150US v2

2020-03-17T13:17:32+00:00

This device was added to the stand-alone driver on github.
Add it to the staging driver as well.

Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7
Signed-off-by: Michael Straube 
Cc: stable 
Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman

staging: greybus: loopback_test: fix potential path truncations

2020-03-17T13:17:32+00:00

Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.

	snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);

	snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
		 t->sysfs_prefix, d->name);

	snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
		 t->debugfs_prefix, d->name);

Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.

Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.

Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman