linux-stable.git/drivers/staging, branch v5.4.68

staging: greybus: audio: fix uninitialized value issue

2020-09-17T11:47:55+00:00

commit 1dffeb8b8b4c261c45416d53c75ea51e6ece1770 upstream.

The current implementation for gbcodec_mixer_dapm_ctl_put() uses
uninitialized gbvalue for comparison with updated value. This was found
using static analysis with coverity.

Uninitialized scalar variable (UNINIT)
11. uninit_use: Using uninitialized value
gbvalue.value.integer_value[0].
460        if (gbvalue.value.integer_value[0] != val) {

This patch fixes the issue with fetching the gbvalue before using it for
    comparision.

Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec")
Reported-by: Colin Ian King 
Signed-off-by: Vaibhav Agarwal 
Cc: stable 
Link: https://lore.kernel.org/r/bc4f29eb502ccf93cd2ffd98db0e319fa7d0f247.1597408126.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman

staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()

2020-09-17T11:47:51+00:00

commit fea22e159d51c766ba70473f473a0ec914cc7e92 upstream.

let's use usb_find_common_endpoints() to discover endpoints, it does all
necessary checks for type and xfer direction

remove memset() in hfa384x_create(), because we now assign endpoints in
prism2sta_probe_usb() and because create_wlan() uses kzalloc() to
allocate hfa384x struct before calling hfa384x_create()

Fixes: faaff9765664 ("staging: wlan-ng: properly check endpoint types")
Reported-and-tested-by: syzbot+22794221ab96b0bab53a@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=22794221ab96b0bab53a
Signed-off-by: Rustam Kovhaev 
Cc: stable 
Link: https://lore.kernel.org/r/20200804145614.104320-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman

media: cedrus: Add missing v4l2_ctrl_request_hdl_put()

2020-09-09T17:12:26+00:00

[ Upstream commit b30063976f29fc221a99d18d37d22ca035068aa9 ]

The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put() in the error path. Fix it.

Fixes: 50e761516f2b8c ("media: platform: Add Cedrus VPU decoder driver")
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

staging: rtl8192u: fix a dubious looking mask before a shift

2020-08-19T06:16:13+00:00

[ Upstream commit c4283950a9a4d3bf4a3f362e406c80ab14f10714 ]

Currently the masking of ret with 0xff and followed by a right shift
of 8 bits always leaves a zero result.  It appears the mask of 0xff
is incorrect and should be 0xff00, but I don't have the hardware to
test this. Fix this to mask the upper 8 bits before shifting.

[ Not tested ]

Addresses-Coverity: ("Operands don't affect result")
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King 
Link: https://lore.kernel.org/r/20200716154720.1710252-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: vchiq_arm: Add a matching unregister call

2020-08-19T06:16:09+00:00

[ Upstream commit 5d9272e28a9a6117fb63f5f930991304765caa32 ]

All the registered children of vchiq have a corresponding call to
platform_device_unregister except bcm2835_audio. Fix that.

Fixes: 25c7597af20d ("staging: vchiq_arm: Register a platform device for audio")

Signed-off-by: Phil Elwell 
Signed-off-by: Jacopo Mondi 
Signed-off-by: Nicolas Saenz Julienne 
Link: https://lore.kernel.org/r/20200629150945.10720-9-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

Staging: rtl8188eu: rtw_mlme: Fix uninitialized variable authmode

2020-08-11T13:33:34+00:00

commit 11536442a3b4e1de6890ea5e805908debb74f94a upstream.

The variable authmode can be uninitialized. The danger would be if
it equals to _WPA_IE_ID_ (0xdd) or _WPA2_IE_ID_ (0x33). We can avoid
this by setting it to zero instead. This is the approach that was
used in the rtl8723bs driver.

Fixes: 7b464c9fa5cc ("staging: r8188eu: Add files for new driver - part 4")
Co-developed-by: Dan Carpenter 
Signed-off-by: Dan Carpenter 
Signed-off-by: Dinghao Liu 
Cc: stable 
Link: https://lore.kernel.org/r/20200728072153.9202-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman

staging: rtl8712: handle firmware load failure

2020-08-11T13:33:34+00:00

commit b4383c971bc5263efe2b0915ba67ebf2bf3f1ee5 upstream.

when firmware fails to load we should not call unregister_netdev()
this patch fixes a race condition between rtl871x_load_fw_cb() and
r871xu_dev_remove() and fixes the bug reported by syzbot

Reported-by: syzbot+80899a8a8efe8968cde7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=80899a8a8efe8968cde7
Signed-off-by: Rustam Kovhaev 
Cc: stable 
Link: https://lore.kernel.org/r/20200716151324.1036204-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman

staging: android: ashmem: Fix lockdep warning for write operation

2020-08-11T13:33:34+00:00

commit 3e338d3c95c735dc3265a86016bb4c022ec7cadc upstream.

syzbot report [1] describes a deadlock when write operation against an
ashmem fd executed at the time when ashmem is shrinking its cache results
in the following lock sequence:

Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(fs_reclaim);
                                lock(&sb->s_type->i_mutex_key#13);
                                lock(fs_reclaim);
   lock(&sb->s_type->i_mutex_key#13);

kswapd takes fs_reclaim and then inode_lock while generic_perform_write
takes inode_lock and then fs_reclaim. However ashmem does not support
writing into backing shmem with a write syscall. The only way to change
its content is to mmap it and operate on mapped memory. Therefore the race
that lockdep is warning about is not valid. Resolve this by introducing a
separate lockdep class for the backing shmem inodes.

[1]: https://lkml.kernel.org/lkml/0000000000000b5f9d059aa2037f@google.com/

Reported-by: syzbot+7a0d9d0b26efefe61780@syzkaller.appspotmail.com
Signed-off-by: Suren Baghdasaryan 
Cc: stable 
Reviewed-by: Joel Fernandes (Google) 
Link: https://lore.kernel.org/r/20200730192632.3088194-1-surenb@google.com
Signed-off-by: Greg Kroah-Hartman

staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift

2020-07-29T08:18:42+00:00

commit 926234f1b8434c4409aa4c53637aa3362ca07cea upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc:  #3.17+
Signed-off-by: Ian Abbott 
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman

staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift

2020-07-29T08:18:42+00:00

commit fc846e9db67c7e808d77bf9e2ef3d49e3820ce5d upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity.  Only channels 0 to 15
are valid.

Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc:  #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it
Cc:  #4.0+
Signed-off-by: Ian Abbott 
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman