linux-stable.git/drivers/staging, branch v5.4.44 Linux kernel stable tree staging: greybus: Fix uninitialized scalar variable 2020-05-27T15:46:45+00:00 Oscar Carter oscar.carter@gmx.com 2020-05-10T10:14:26+00:00 56cff2ac7c9d295c1588870450994eec1676e68c commit 34625c1931f8204c234c532b446b9f53c69f4b68 upstream. In the "gb_tty_set_termios" function the "newline" variable is declared but not initialized. So the "flow_control" member is not initialized and the OR / AND operations with itself results in an undefined value in this member. The purpose of the code is to set the flow control type, so remove the OR / AND self operator and set the value directly. Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable") Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios") Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 34625c1931f8204c234c532b446b9f53c69f4b68 upstream.

In the "gb_tty_set_termios" function the "newline" variable is declared
but not initialized. So the "flow_control" member is not initialized and
the OR / AND operations with itself results in an undefined value in
this member.

The purpose of the code is to set the flow control type, so remove the
OR / AND self operator and set the value directly.

Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable")
Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: kpc2000: fix error return code in kp2000_pcie_probe() 2020-05-27T15:46:45+00:00 Wei Yongjun weiyongjun1@huawei.com 2020-05-06T13:47:35+00:00 a41e02cb4232a45533ecc0bc9bc81cee94261e05 commit b17884ccf29e127b16bba6aea1438c851c9f5af1 upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Also removed var 'rv' since we can use 'err' instead. Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b17884ccf29e127b16bba6aea1438c851c9f5af1 upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function. Also
removed var 'rv' since we can use 'err' instead.

Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: iio: ad2s1210: Fix SPI reading 2020-05-27T15:46:45+00:00 Dragos Bogdan dragos.bogdan@analog.com 2020-04-29T07:21:29+00:00 dee81110a4888cf8eb419434c0ad687129c7d0fd commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream. If the serial interface is used, the 8-bit address should be latched using the rising edge of the WR/FSYNC signal. This basically means that a CS change is required between the first byte sent, and the second one. This change splits the single-transfer transfer of 2 bytes into 2 transfers with a single byte, and CS change in-between. Note fixes tag is not accurate, but reflects a point beyond which there are too many refactors to make backporting straight forward. Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream.

If the serial interface is used, the 8-bit address should be latched using
the rising edge of the WR/FSYNC signal.

This basically means that a CS change is required between the first byte
sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers
with a single byte, and CS change in-between.

Note fixes tag is not accurate, but reflects a point beyond which there
are too many refactors to make backporting straight forward.

Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: gasket: Check the return value of gasket_get_bar_index() 2020-05-14T05:58:27+00:00 Oscar Carter oscar.carter@gmx.com 2020-05-01T15:51:18+00:00 b8fe132bae6654a0e1ae8439e3a9f63480e4059d commit 769acc3656d93aaacada814939743361d284fd87 upstream. Check the return value of gasket_get_bar_index function as it can return a negative one (-EINVAL). If this happens, a negative index is used in the "gasket_dev->bar_data" array. Addresses-Coverity-ID: 1438542 ("Negative array index read") Fixes: 9a69f5087ccc2 ("drivers/staging: Gasket driver framework + Apex driver") Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Richard Yeh <rcy@google.com> Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 769acc3656d93aaacada814939743361d284fd87 upstream.

Check the return value of gasket_get_bar_index function as it can return
a negative one (-EINVAL). If this happens, a negative index is used in
the "gasket_dev->bar_data" array.

Addresses-Coverity-ID: 1438542 ("Negative array index read")
Fixes: 9a69f5087ccc2 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Richard Yeh <rcy@google.com>
Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Move Apex Edge TPU class quirk to fix BAR assignment 2020-05-02T06:48:50+00:00 Bjorn Helgaas bhelgaas@google.com 2020-04-09T17:43:45+00:00 764a7d0a2756373542e5da01558bf6d1b42ca35d commit 0a8f41023e8a3c100b3dc458ed2da651bf961ead upstream. Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Debugged-by: Luís Mendes <luis.p.mendes@gmail.com> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0a8f41023e8a3c100b3dc458ed2da651bf961ead upstream.

Some Google Apex Edge TPU devices have a class code of 0
(PCI_CLASS_NOT_DEFINED).  This prevents the PCI core from assigning
resources for the Apex BARs because __dev_sort_resources() ignores
classless devices, host bridges, and IOAPICs.

On x86, firmware typically assigns those resources, so this was not a
problem.  But on some architectures, firmware does *not* assign BARs, and
since the PCI core didn't do it either, the Apex device didn't work
correctly:

  apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed
  apex 0000:01:00.0: error enabling PCI device

f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a
quirk to fix the class code, but it was in the apex driver, and if the
driver was built as a module, it was too late to help.

Move the quirk to the PCI core, where it will always run early enough that
the PCI core will assign resources if necessary.

Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com
Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class")
Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Debugged-by: Luís Mendes <luis.p.mendes@gmail.com>
Tested-by: Luis Mendes <luis.p.mendes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6656: Power save stop wake_up_count wrap around. 2020-04-29T14:33:22+00:00 Malcolm Priestley tvboxspy@gmail.com 2020-04-14T10:39:23+00:00 23d44059bc4462e0126ca8f41b26df42caf78a36 commit ea81c3486442f4643fc9825a2bb1b430b829bccd upstream. conf.listen_interval can sometimes be zero causing wake_up_count to wrap around up to many beacons too late causing CTRL-EVENT-BEACON-LOSS as in. wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ] Fixes: 43c93d9bf5e2 ("staging: vt6656: implement power saving code.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ea81c3486442f4643fc9825a2bb1b430b829bccd upstream.

conf.listen_interval can sometimes be zero causing wake_up_count
to wrap around up to many beacons too late causing
CTRL-EVENT-BEACON-LOSS as in.

wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ]

Fixes: 43c93d9bf5e2 ("staging: vt6656: implement power saving code.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6656: Fix pairwise key entry save. 2020-04-29T14:33:21+00:00 Malcolm Priestley tvboxspy@gmail.com 2020-04-18T21:01:49+00:00 9f1a23cbef73a953620150b5eb1bcb9929e02b0c commit 0b59f10b1d8fe8d50944f21f5d403df9303095a8 upstream. The problem is that the group key was saved as VNT_KEY_DEFAULTKEY was over written by the VNT_KEY_GROUP_ADDRESS index. mac80211 could not clear the mac_addr in the default key. The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as VNT_KEY_GROUP_ADDRESS. mac80211 can clear any key using vnt_mac_disable_keyentry. Fixes: f9ef05ce13e4 ("staging: vt6656: Fix pairwise key for non station modes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/da2f7e7f-1658-1320-6eee-0f55770ca391@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0b59f10b1d8fe8d50944f21f5d403df9303095a8 upstream.

The problem is that the group key was saved as VNT_KEY_DEFAULTKEY
was over written by the VNT_KEY_GROUP_ADDRESS index.

mac80211 could not clear the mac_addr in the default key.

The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as
VNT_KEY_GROUP_ADDRESS.

mac80211 can clear any key using vnt_mac_disable_keyentry.

Fixes: f9ef05ce13e4 ("staging: vt6656: Fix pairwise key for non station modes")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/da2f7e7f-1658-1320-6eee-0f55770ca391@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6656: Fix drivers TBTT timing counter. 2020-04-29T14:33:21+00:00 Malcolm Priestley tvboxspy@gmail.com 2020-04-18T16:43:24+00:00 0bcc6585717e67914c9a710246faaec7f523b7e0 commit 09057742af98a39ebffa27fac4f889dc873132de upstream. The drivers TBTT counter is not synchronized with mac80211 timestamp. Reorder the functions and use vnt_update_next_tbtt to do the final synchronize. Fixes: c15158797df6 ("staging: vt6656: implement TSF counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/375d0b25-e8bc-c8f7-9b10-6cc705d486ee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 09057742af98a39ebffa27fac4f889dc873132de upstream.

The drivers TBTT counter is not synchronized with mac80211 timestamp.

Reorder the functions and use vnt_update_next_tbtt to do the final
synchronize.

Fixes: c15158797df6 ("staging: vt6656: implement TSF counter")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/375d0b25-e8bc-c8f7-9b10-6cc705d486ee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6656: Fix calling conditions of vnt_set_bss_mode 2020-04-29T14:33:21+00:00 Malcolm Priestley tvboxspy@gmail.com 2020-04-18T17:37:18+00:00 74bbe9d990400007b959a186cce744b4877cb99a commit 664ba5180234593b4b8517530e8198bf2f7359e2 upstream. vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES, BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode. Fixes an issue that preamble mode is not being updated correctly. Fixes: c12603576e06 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/44110801-6234-50d8-c583-9388f04b486c@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 664ba5180234593b4b8517530e8198bf2f7359e2 upstream.

vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES,
BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT

Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode.

Fixes an issue that preamble mode is not being updated correctly.

Fixes: c12603576e06 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/44110801-6234-50d8-c583-9388f04b486c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. 2020-04-29T14:33:21+00:00 Malcolm Priestley tvboxspy@gmail.com 2020-04-18T16:24:50+00:00 ec5ad5e1958c6a48e0bd1fb5323adc6b8deffb6a commit 0f8240bfc070033a4823b19883efd3d38c7735cc upstream. mac80211/users control whether multicast is on or off don't enable it by default. Fixes an issue when multicast/broadcast is always on allowing other beacons through in power save. Fixes: db8f37fa3355 ("staging: vt6656: mac80211 conversion: main_usb add functions...") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/2c24c33d-68c4-f343-bd62-105422418eac@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0f8240bfc070033a4823b19883efd3d38c7735cc upstream.

mac80211/users control whether multicast is on or off don't enable it by default.

Fixes an issue when multicast/broadcast is always on allowing other beacons through
in power save.

Fixes: db8f37fa3355 ("staging: vt6656: mac80211 conversion: main_usb add functions...")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/2c24c33d-68c4-f343-bd62-105422418eac@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>