linux-stable.git/drivers/staging, branch v5.11.4

staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()

2021-03-07T11:35:51+00:00

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger 
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: most: sound: add sanity check for function argument

2021-03-07T11:35:51+00:00

[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm 
Reported-by: Dan Carpenter 
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: fwserial: Fix error handling in fwserial_create

2021-03-07T11:35:49+00:00

[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.

Signed-off-by: Dinghao Liu 
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table

2021-03-04T11:15:29+00:00

commit 7a8d2f1908a59003e55ef8691d09efb7fbc51625 upstream.

The Edimax EW-7811UN V2 uses an RTL8188EU chipset and works with this
driver.

Signed-off-by: Martin Kaiser 
Cc: stable 
Link: https://lore.kernel.org/r/20210204085217.9743-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman

staging: gdm724x: Fix DMA from stack

2021-03-04T11:15:29+00:00

commit 7c3a0635cd008eaca9a734dc802709ee0b81cac5 upstream.

Stack allocated buffers cannot be used for DMA
on all architectures so allocate hci_packet buffer
using kmalloc.

Reviewed-by: Dan Carpenter 
Signed-off-by: Amey Narkhede 
Link: https://lore.kernel.org/r/20210211053819.34858-1-ameynarkhede03@gmail.com
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

staging/mt7621-dma: mtk-hsdma.c->hsdma-mt7621.c

2021-03-04T11:15:29+00:00

commit 1f92798cbe7fe923479cff754dd06dd23d352e36 upstream.

Also use KBUILD_MODNAME for module name.

This driver is only used by RALINK MIPS MT7621 SoCs. Tested by building
against that target using OpenWrt with Linux 5.10.10.

Fixes the following error:
error: the following would cause module name conflict:
  drivers/dma/mediatek/mtk-hsdma.ko
  drivers/staging/mt7621-dma/mtk-hsdma.ko

Cc: stable@vger.kernel.org
Cc: Masahiro Yamada 
Signed-off-by: Ilya Lipnitskiy 
Link: https://lore.kernel.org/r/20210130034507.2115280-1-ilya.lipnitskiy@gmail.com
Signed-off-by: Greg Kroah-Hartman

media: atomisp: Fix a buffer overflow in debug code

2021-03-04T11:14:15+00:00

[ Upstream commit 625993166b551d633917ca35d4afb7b46d7451b4 ]

The "pad" variable is a user controlled string and we haven't properly
clamped it at this point so the debug code could print from beyond the
of the array.

Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx7: csi: Fix pad link validation

2021-03-04T11:14:13+00:00

[ Upstream commit f5ffb81f51376eb5a12e8c4cb4871426c65bb2af ]

We can not make the assumption that the bound subdev is always a CSI
mux, in i.MX6UL/i.MX6ULL that is not the case. So, just get the entity
selected by source directly upstream from the CSI.

Fixes: 86e02d07871c ("media: imx5/6/7: csi: Mark a bound video mux as a CSI mux")
Reported-by: Fabio Estevam 
Signed-off-by: Rui Miguel Silva 
Tested-by: Fabio Estevam 
Tested-by: Sébastien Szymanski 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx7: csi: Fix regression for parallel cameras on i.MX6UL

2021-03-04T11:14:12+00:00

[ Upstream commit 9bac67214fbf4b5f23463f7742ccf69bfe684cbd ]

Commit 86e02d07871c ("media: imx5/6/7: csi: Mark a bound video mux as
a CSI mux") made an incorrect assumption that for imx7-media-csi,
the bound subdev must always be a CSI mux. On i.MX6UL/i.MX6ULL there
is no CSI mux at all, so do not return an error when the entity is not a
video mux and assign the IMX_MEDIA_GRP_ID_CSI_MUX group id only when
appropriate.

This is the same approach as done in imx-media-csi.c and it fixes the
csi probe regression on i.MX6UL.

Tested on a imx6ull-evk board.

Fixes: 86e02d07871c ("media: imx5/6/7: csi: Mark a bound video mux as a CSI mux")
Signed-off-by: Fabio Estevam 
Signed-off-by: Rui Miguel Silva 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx: Fix csc/scaler unregister

2021-03-04T11:14:09+00:00

[ Upstream commit 89b14485caa4b7b2eaf70be0064f0978e68ebeee ]

The csc/scaler device private struct is released by
ipu_csc_scaler_video_device_release(), which can be called
by video_unregister_device() if there are no users
of the underlying struct video device.

Therefore, the mutex can't be held when calling
video_unregister_device() as its memory may be freed
by it, leading to a kernel oops.

Fortunately, the fix is quite simple as no locking
is needed when calling video_unregister_device(): v4l2-core
already has its own internal locking, and the structures
are also properly refcounted.

Fixes: a8ef0488cc59 ("media: imx: add csc/scaler mem2mem device")
Signed-off-by: Ezequiel Garcia 
Reviewed-by: Philipp Zabel 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin