linux-stable.git/drivers/staging, branch v5.0.4

media: imx: csi: Stop upstream before disabling IDMA channel

2019-03-23T19:11:39+00:00

commit 4bc1ab41eee9d02ad2483bf8f51a7b72e3504eba upstream.

Move upstream stream off to just after receiving the last EOF completion
and disabling the CSI (and thus before disabling the IDMA channel) in
csi_stop(). For symmetry also move upstream stream on to beginning of
csi_start().

Doing this makes csi_s_stream() more symmetric with prp_s_stream() which
will require the same change to fix a hard lockup.

Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org	# for 4.13 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx: csi: Disable CSI immediately after last EOF

2019-03-23T19:11:39+00:00

commit 2e0fe66e0a136252f4d89dbbccdcb26deb867eb8 upstream.

Disable the CSI immediately after receiving the last EOF before stream
off (and thus before disabling the IDMA channel). Do this by moving the
wait for EOF completion into a new function csi_idmac_wait_last_eof().

This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:

while true; do v4l2-ctl  -d4 --stream-mmap --stream-count=3; done

Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.

The lockup occurs when disabling the IDMA channel at stream off. Disabling
the CSI before disabling the IDMA channel appears to be a reliable fix for
the hard lockup.

Fixes: 4a34ec8e470cb ("[media] media: imx: Add CSI subdev driver")

Reported-by: Gaël PORTAY 
Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org	# for 4.13 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx-csi: Input connections to CSI should be optional

2019-03-23T19:11:39+00:00

commit 337e90ed028643c7acdfd0d31e3224d05ca03d66 upstream.

Some imx platforms do not have fwnode connections to all CSI input
ports, and should not be treated as an error. This includes the
imx6q SabreAuto, which has no connections to ipu1_csi1 and ipu2_csi0.
Return -ENOTCONN in imx_csi_parse_endpoint() so that v4l2-fwnode
endpoint parsing will not treat an unconnected CSI input port as
an error.

Fixes: c893500a16baf ("media: imx: csi: Register a subdev notifier")

Signed-off-by: Steve Longerbeam 
Reviewed-by: Philipp Zabel 
Acked-by: Tim Harvey 
Cc: stable@vger.kernel.org
Tested-by: Fabio Estevam 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx: prpencvf: Stop upstream before disabling IDMA channel

2019-03-23T19:11:38+00:00

commit a19c22677377b87e4354f7306f46ad99bc982a9f upstream.

Upstream must be stopped immediately after receiving the last EOF and
before disabling the IDMA channel. This can be accomplished by moving
upstream stream off to just after receiving the last EOF completion in
prp_stop(). For symmetry also move upstream stream on to end of
prp_start().

This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:

while true; do v4l2-ctl  -d1 --stream-mmap --stream-count=3; done

Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.

The lockup occurs when disabling the IDMA channel at stream off. Stopping
the video data stream entering the IDMA channel before disabling the
channel itself appears to be a reliable fix for the hard lockup.

Fixes: f0d9c8924e2c3 ("[media] media: imx: Add IC subdev drivers")

Reported-by: Gaël PORTAY 
Tested-by: Gaël PORTAY 
Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org	# for 4.13 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

staging: erofs: compressed_pages should not be accessed again after freed

2019-03-13T21:01:31+00:00

commit af692e117cb8cd9d3d844d413095775abc1217f9 upstream.

This patch resolves the following page use-after-free issue,
z_erofs_vle_unzip:
    ...
    for (i = 0; i < nr_pages; ++i) {
        ...
        z_erofs_onlinepage_endio(page);  (1)
    }

    for (i = 0; i < clusterpages; ++i) {
        page = compressed_pages[i];

        if (page->mapping == mngda)      (2)
            continue;
        /* recycle all individual staging pages */
        (void)z_erofs_gather_if_stagingpage(page_pool, page); (3)
        WRITE_ONCE(compressed_pages[i], NULL);
    }
    ...

After (1) is executed, page is freed and could be then reused, if
compressed_pages is scanned after that, it could fall info (2) or
(3) by mistake and that could finally be in a mess.

This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc:  # 4.19+
Signed-off-by: Gao Xiang 
Reviewed-by: Chao Yu 
Signed-off-by: Greg Kroah-Hartman

staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()

2019-03-13T21:01:31+00:00

commit 419d6efc50e94bcf5d6b35cd8c71f79edadec564 upstream.

As Al pointed out, "
... and while we are at it, what happens to
	unsigned int nameoff = le16_to_cpu(de[mid].nameoff);
	unsigned int matched = min(startprfx, endprfx);

	struct qstr dname = QSTR_INIT(data + nameoff,
		unlikely(mid >= ndirents - 1) ?
			maxsize - nameoff :
			le16_to_cpu(de[mid + 1].nameoff) - nameoff);

	/* string comparison without already matched prefix */
	int ret = dirnamecmp(name, &dname, &matched);
if le16_to_cpu(de[...].nameoff) is not monotonically increasing?  I.e.
what's to prevent e.g. (unsigned)-1 ending up in dname.len?

Corrupted fs image shouldn't oops the kernel.. "

Revisit the related lookup flow to address the issue.

Fixes: d72d1ce60174 ("staging: erofs: add namei functions")
Cc:  # 4.19+
Suggested-by: Al Viro 
Signed-off-by: Gao Xiang 
Signed-off-by: Greg Kroah-Hartman

staging: android: ashmem: Avoid range_alloc() allocation with ashmem_mutex held.

2019-03-10T06:08:58+00:00

commit ecd182cbf4e107928077866399100228d2359c60 upstream.

ashmem_pin() is calling range_shrink() without checking whether
range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex
held should be avoided because ashmem_shrink_scan() tries to hold it.

Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin()
and make range_alloc() not to fail.

This patch is mostly meant for backporting purpose for fuzz testing on
stable/distributor kernels, for there is a plan to remove this code in
near future.

Signed-off-by: Tetsuo Handa 
Cc: stable@vger.kernel.org
Reviewed-by: Joel Fernandes 
Signed-off-by: Greg Kroah-Hartman

staging: android: ashmem: Don't call fallocate() with ashmem_mutex held.

2019-03-10T06:08:58+00:00

commit fb4415a12632f0b9078a0aa80c16745d48fcfc74 upstream.

syzbot is hitting lockdep warnings [1][2][3]. This patch tries to fix
the warning by eliminating ashmem_shrink_scan() => {shmem|vfs}_fallocate()
sequence.

[1] https://syzkaller.appspot.com/bug?id=87c399f6fa6955006080b24142e2ce7680295ad4
[2] https://syzkaller.appspot.com/bug?id=7ebea492de7521048355fc84210220e1038a7908
[3] https://syzkaller.appspot.com/bug?id=e02419c12131c24e2a957ea050c2ab6dcbbc3270

Reported-by: syzbot 
Reported-by: syzbot 
Reported-by: syzbot 
Signed-off-by: Tetsuo Handa 
Cc: stable@vger.kernel.org
Acked-by: Joel Fernandes (Google) 
Signed-off-by: Greg Kroah-Hartman

staging: android: ion: fix sys heap pool's gfp_flags

2019-03-10T06:08:58+00:00

commit 9bcf065e28122588a6cbee08cf847826dacbb438 upstream.

In the first loop, gfp_flags will be modified to high_order_gfp_flags,
and there will be no chance to change back to low_order_gfp_flags.

Fixes: e7f63771b60e ("ION: Sys_heap: Add cached pool to spead up cached buffer alloc")
Signed-off-by: Qing Xia 
Cc: stable 
Signed-off-by: Jing Xia 
Reviewed-by: Yuming Han 
Reviewed-by: Zhaoyang Huang 
Reviewed-by: Orson Zhai 
Signed-off-by: Greg Kroah-Hartman

staging: wilc1000: fix to set correct value for 'vif_num'

2019-03-10T06:08:58+00:00

commit dda037057a572f5c82ac2499eb4e6fb17600ba3e upstream.

Set correct value in '->vif_num' for the total number of interfaces and
set '->idx' value using 'i'.

Fixes: 735bb39ca3be ("staging: wilc1000: simplify vif[i]->ndev accesses")
Fixes: 0e490657c721 ("staging: wilc1000: Fix problem with wrong vif index")
Cc: 
Suggested-by: Dan Carpenter 
Reviewed-by: Dan Carpenter 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman