linux-stable.git/drivers/staging, branch v4.19.201

staging: rtl8723bs: fix macro value for 2.4Ghz only device

2021-07-20T14:16:10+00:00

[ Upstream commit 6d490a27e23c5fb79b766530016ab8665169498e ]

fix IQK_Matrix_Settings_NUM macro value to 14 which is
the max channel number value allowed in a 2.4Ghz device.

Acked-by: Hans de Goede 
Signed-off-by: Fabio Aiuto 
Link: https://lore.kernel.org/r/0b4a876929949248aa18cb919da3583c65e4ee4e.1624367072.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: mt7621-dts: fix pci address for PCI memory range

2021-07-20T14:15:56+00:00

[ Upstream commit 5b4f167ef3555ec4c334a8dc89c1b44bb2c6bff5 ]

Driver code call 'devm_of_pci_get_host_bridge_resources'
to get resources and properly fill 'bridge->windows' and
'bridge->dma_ranges'. After parsing the ranges and store
as resources, at the end it makes a call to pci function
'pci_add_resource_offset' to set the offset for the
memory resource. To calculate offset, resource start address
subtracts pci address of the range. MT7621 does not need
any offset for the memory resource. Moreover, setting an
offset got into 'WARN_ON' calls from pci devices driver code.
Until now memory range pci_addr was being '0x00000000' and
res->start is '0x60000000' but becase pci controller driver
was manually setting resources and adding them using pci function
'pci_add_resource' where a zero is passed as offset, things
was properly working. Since PCI_IOBASE is defined now for
ralink we don't set nothing manually anymore so we have to
properly fix PCI address for this range to make things work
and the new pci address must be set to '0x60000000'. Doing
in this way the subtract result obtain zero as offset
and pci device driver code properly works.

Fixes: d59578da2bb8 ("staging: mt7621-dts: add dts files")
Signed-off-by: Sergio Paracuellos 
Link: https://lore.kernel.org/r/20210614100617.28753-4-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: gdm724x: check for overflow in gdm_lte_netif_rx()

2021-07-20T14:15:56+00:00

[ Upstream commit 7002b526f4ff1f6da34356e67085caafa6be383a ]

This code assumes that "len" is at least 62 bytes, but we need a check
to prevent a read overflow.

Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YMcoTPsCYlhh2TQo@mwanda
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()

2021-07-20T14:15:56+00:00

[ Upstream commit 4a36e160856db8a8ddd6a3d2e5db5a850ab87f82 ]

There needs to be a check to verify that we don't read beyond the end
of "buf".  This function is called from do_rx().  The "buf" is the USB
transfer_buffer and "len" is "urb->actual_length".

Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YMcnl4zCwGWGDVMG@mwanda
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

media: imx-csi: Skip first few frames from a BT.656 source

2021-07-20T14:15:44+00:00

[ Upstream commit e198be37e52551bb863d07d2edc535d0932a3c4f ]

Some BT.656 sensors (e.g. ADV718x) transmit frames with unstable BT.656
sync codes after initial power on. This confuses the imx CSI,resulting
in vertical and/or horizontal sync issues. Skip the first 20 frames
to avoid the unstable sync codes.

[fabio: fixed checkpatch warning and increased the frame skipping to 20]

Signed-off-by: Steve Longerbeam 
Signed-off-by: Fabio Estevam 
Reviewed-by: Tim Harvey 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled

2021-06-30T12:48:21+00:00

[ Upstream commit eb367d875f94a228c17c8538e3f2efcf2eb07ead ]

In 'rt2880_pmx_group_enable' driver is printing an error and returning
-EBUSY if a pin has been already enabled. This begets anoying messages
in the caller when this happens like the following:

rt2880-pinmux pinctrl: pcie is already enabled
mt7621-pci 1e140000.pcie: Error applying setting, reverse things back

To avoid this just print the already enabled message in the pinctrl
driver and return 0 instead to not confuse the user with a real
bad problem.

Signed-off-by: Sergio Paracuellos 
Link: https://lore.kernel.org/r/20210604055337.20407-1-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

staging: rtl8723bs: Fix uninitialized variables

2021-06-16T09:54:59+00:00

commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.

The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.

[  456.873025] ------------[ cut here ]------------
[  456.878198] kernel BUG at mm/slub.c:3968!
[  456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

  [ snip ]

[  457.271004] Backtrace:
[  457.273733] [] (kfree) from [] (nl80211_send_station+0x954/0xfc4)
[  457.282481]  r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[  457.291132] [] (nl80211_send_station) from [] (cfg80211_new_sta+0x90/0x1cc)
[  457.300850]  r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[  457.309586]  r4:ec46d9e0
[  457.312433] [] (cfg80211_new_sta) from [] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[  457.324095]  r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[  457.332831]  r4:c1606788
[  457.335692] [] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[  457.349489]  r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[  457.355845] [] (rtw_stassoc_event_callback [r8723bs]) from [] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[  457.367601]  r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[  457.373959] [] (mlme_evt_hdl [r8723bs]) from [] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[  457.384744]  r5:f086e000 r4:f086c000
[  457.388754] [] (rtw_cmd_thread [r8723bs]) from [] (kthread+0x170/0x174)
[  457.398083]  r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[  457.406828]  r4:e8369900
[  457.409653] [] (kthread) from [] (ret_from_fork+0x14/0x2c)
[  457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[  457.423356] ffa0:                                     00000000 00000000 00000000 00000000
[  457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  457.449006]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[  457.457750]  r4:e9975200
[  457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[  457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---

Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi 
Reviewed-by: Dan Carpenter 
Cc: stable 
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman

staging: emxx_udc: fix loop in _nbu2ss_nuke()

2021-06-03T06:38:11+00:00

[ Upstream commit e0112a7c9e847ada15a631b88e279d547e8f26a7 ]

The _nbu2ss_ep_done() function calls:

	list_del_init(&req->queue);

which means that the loop will never exit.

Fixes: ca3d253eb967 ("Staging: emxx_udc: Iterate list using list_for_each_entry")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwanda
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

spi: mt7621: Don't leak SPI master in probe error path

2021-06-03T06:38:07+00:00

commit 46b5c4fb87ce8211e0f9b0383dbde72c3652d2ba upstream.

If the calls to device_reset() or devm_spi_register_controller() fail on
probe of the MediaTek MT7621 SPI driver, the spi_controller struct is
erroneously not freed.  Fix by switching over to the new
devm_spi_alloc_master() helper.

Additionally, there's an ordering issue in mt7621_spi_remove() wherein
the spi_controller is unregistered after disabling the SYS clock.
The correct order is to call spi_unregister_controller() *before* this
teardown step because bus accesses may still be ongoing until that
function returns.

All of these bugs have existed since the driver was first introduced,
so it seems fair to fix them together in a single commit.

Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Lukas Wunner 
Reviewed-by: Stefan Roese 
Cc:  # v4.17+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc:  # v4.17+
Link: https://lore.kernel.org/r/72b680796149f5fcda0b3f530ffb7ee73b04f224.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown 
[lukas: backport to v4.19.192]
Signed-off-by: Lukas Wunner 
Signed-off-by: Greg Kroah-Hartman

spi: mt7621: Disable clock in probe error path

2021-06-03T06:38:07+00:00

commit 24f7033405abe195224ec793dbc3d7a27dec0b98 upstream.

Commit 702b15cb9712 ("spi: mt7621: fix missing clk_disable_unprepare()
on error in mt7621_spi_probe") sought to disable the SYS clock on probe
errors, but only did so for 2 of 3 potentially failing calls:  The clock
needs to be disabled on failure of devm_spi_register_controller() as
well.

Moreover, the commit purports to fix a bug in commit cbd66c626e16 ("spi:
mt7621: Move SPI driver out of staging") but in reality the bug has
existed since the driver was first introduced.

Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Lukas Wunner 
Cc:  # v4.17+: 702b15cb9712: spi: mt7621: fix missing clk_disable_unprepare() on error in mt7621_spi_probe
Cc:  # v4.17+
Cc: Qinglang Miao 
Link: https://lore.kernel.org/r/36ad42760087952fb7c10aae7d2628547c26a7ec.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown 
[lukas: backport to v4.19.192]
Signed-off-by: Lukas Wunner 
Signed-off-by: Greg Kroah-Hartman