linux-stable.git/drivers/staging, branch v4.14.151

staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

2019-10-29T08:17:30+00:00

commit 153c5d8191c26165dbbd2646448ca7207f7796d0 upstream.

Currently the exit return path when sme->key_idx >= NUM_WEPKEYS is via
label 'exit' and this checks if result is non-zero, however result has
not been initialized and contains garbage.  Fix this by replacing the
goto with a return with the error code.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 0ca6d8e74489 ("Staging: wlan-ng: replace switch-case statements with macro")
Signed-off-by: Colin Ian King 
Cc: stable 
Link: https://lore.kernel.org/r/20191014110201.9874-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman

Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc

2019-10-17T20:43:47+00:00

[ Upstream commit 5bdea6060618cfcf1459dca137e89aee038ac8b9 ]

In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Navid Emamdoost 
Reviewed-by: Dan Carpenter 
Cc: stable 
Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: vt6655: Fix memory leak in vt6655_probe

2019-10-17T20:43:38+00:00

commit 80b15db5e1e9c3300de299b2d43d1aafb593e6ac upstream.

In vt6655_probe, if vnt_init() fails the cleanup code needs to be called
like other error handling cases. The call to device_free_info() is
added.

Fixes: 67013f2c0e58 ("staging: vt6655: mac80211 conversion add main mac80211 functions")
Signed-off-by: Navid Emamdoost 
Cc: stable 
Link: https://lore.kernel.org/r/20191004200319.22394-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman

media: imx: mipi csi-2: Don't fail if initial state times-out

2019-10-05T10:47:52+00:00

[ Upstream commit 0d5078c7172c46db6c58718d817b9fcf769554b4 ]

Not all sensors will be able to guarantee a proper initial state.
This may be either because the driver is not properly written,
or (probably unlikely) because the hardware won't support it.

While the right solution in the former case is to fix the sensor
driver, the real world not always allows right solutions, due to lack
of available documentation and support on these sensors.

Let's relax this requirement, and allow the driver to support stream start,
even if the sensor initial sequence wasn't the expected.

Also improve the warning message to better explain the problem and provide
a hint that the sensor driver needs to be fixed.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Fabio Estevam 
Reviewed-by: Steve Longerbeam 
Reviewed-by: Philipp Zabel 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

staging: comedi: dt3000: Fix rounding up of timer divisor

2019-08-25T08:50:19+00:00

commit 8e2a589a3fc36ce858d42e767c3bcd8fc62a512b upstream.

`dt3k_ns_to_timer()` determines the prescaler and divisor to use to
produce a desired timing period.  It is influenced by a rounding mode
and can round the divisor up, down, or to the nearest value.  However,
the code for rounding up currently does the same as rounding down!  Fix
ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when
rounding up.

Also, change the types of the `divider`, `base` and `prescale` variables
from `int` to `unsigned int` to avoid mixing signed and unsigned types
in the calculations.

Also fix a typo in a nearby comment: "improvment" => "improvement".

Signed-off-by: Ian Abbott 
Cc: stable 
Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman

staging: comedi: dt3000: Fix signed integer overflow 'divider * base'

2019-08-25T08:50:18+00:00

commit b4d98bc3fc93ec3a58459948a2c0e0c9b501cd88 upstream.

In `dt3k_ns_to_timer()` the following lines near the end of the function
result in a signed integer overflow:

	prescale = 15;
	base = timer_base * (1 << prescale);
	divider = 65535;
	*nanosec = divider * base;

(`divider`, `base` and `prescale` are type `int`, `timer_base` and
`*nanosec` are type `unsigned int`.  The value of `timer_base` will be
either 50 or 100.)

The main reason for the overflow is that the calculation for `base` is
completely wrong.  It should be:

	base = timer_base * (prescale + 1);

which matches an earlier instance of this calculation in the same
function.

Reported-by: David Binderman 
Cc: 
Signed-off-by: Ian Abbott 
Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman

media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.

2019-07-31T05:28:22+00:00

[ Upstream commit 6995a659101bd4effa41cebb067f9dc18d77520d ]

Fix to avoid possible memory leak if the decoder initialization
got failed.Free the allocated memory for file handle object
before return in case decoder initialization fails.

Signed-off-by: Shailendra Verma 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

staging: comedi: amplc_pci230: fix null pointer deref on interrupt

2019-07-21T07:04:36+00:00

commit 7379e6baeddf580d01feca650ec1ad508b6ea8ee upstream.

The interrupt handler `pci230_interrupt()` causes a null pointer
dereference for a PCI260 card.  There is no analog output subdevice for
a PCI260.  The `dev->write_subdev` subdevice pointer and therefore the
`s_ao` subdevice pointer variable will be `NULL` for a PCI260.  The
following call near the end of the interrupt handler results in the null
pointer dereference for a PCI260:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if `s_ao` is valid.

Note that the other uses of `s_ao` in the calls
`pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev,
s_ao);` will never be reached for a PCI260, so they are safe.

Fixes: 39064f23284c ("staging: comedi: amplc_pci230: use comedi_handle_events()")
Cc:  # v3.19+
Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman

staging: comedi: dt282x: fix a null pointer deref on interrupt

2019-07-21T07:04:35+00:00

commit b8336be66dec06bef518030a0df9847122053ec5 upstream.

The interrupt handler `dt282x_interrupt()` causes a null pointer
dereference for those supported boards that have no analog output
support.  For these boards, `dev->write_subdev` will be `NULL` and
therefore the `s_ao` subdevice pointer variable will be `NULL`.  In that
case, the following call near the end of the interrupt handler results
in a null pointer dereference:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if `s_ao` is valid.

(There are other uses of `s_ao` by the interrupt handler that may or may
not be reached depending on values of hardware registers.  Trust that
they are reliable for now.)

Note:
commit 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()")
propagates an earlier error from
commit f21c74fa4cfe ("staging: comedi: dt282x: use cfc_handle_events()").

Fixes: 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()")
Cc:  # v3.19+
Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman

staging:iio:ad7150: fix threshold mode config bit

2019-07-21T07:04:18+00:00

[ Upstream commit df4d737ee4d7205aaa6275158aeebff87fd14488 ]

According to the AD7150 configuration register description, bit 7 assumes
value 1 when the threshold mode is fixed and 0 when it is adaptive,
however, the operation that identifies this mode was considering the
opposite values.

This patch renames the boolean variable to describe it correctly and
properly replaces it in the places where it is used.

Fixes: 531efd6aa0991 ("staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control.")
Signed-off-by: Melissa Wen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin