linux-stable.git/drivers/staging, branch v3.2.93

drm/gma500/psb: Actually use VBT mode when it is found

2017-09-15T17:30:47+00:00

commit 82bc9a42cf854fdf63155759c0aa790bd1f361b0 upstream.

With LVDS we were incorrectly picking the pre-programmed mode instead of
the prefered mode provided by VBT. Make sure we pick the VBT mode if
one is provided. It is likely that the mode read-out code is still wrong
but this patch fixes the immediate problem on most machines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562
Signed-off-by: Patrik Jakobsson 
Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

USB: usbip: fix nonconforming hub descriptor

2017-09-15T17:30:43+00:00

commit ec963b412a54aac8e527708ecad06a6988a86fb4 upstream.

Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).

Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).

This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).

Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi 
Cc: Valentina Manea 
Signed-off-by: Johan Hovold 
Acked-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2:
 - s/VHCI_HC_PORTS/VHCI_NPORTS/
 - Adjust filename, context]
Signed-off-by: Ben Hutchings

staging: rtl: fix possible NULL pointer dereference

2017-06-05T20:13:43+00:00

commit 6e017006022abfea5d2466cad936065f45763ad1 upstream.

gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:

staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]

I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.

This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.

Fixes: 1cc18a22b96b ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: drop changes to r8188eu]
Signed-off-by: Ben Hutchings

netvsc: reduce maximum GSO size

2017-03-16T02:18:55+00:00

[ Upstream commit a50af86dd49ee1851d1ccf06dd0019c05b95e297 ]

Hyper-V (and Azure) support using NVGRE which requires some extra space
for encapsulation headers. Because of this the largest allowed TSO
packet is reduced.

For older releases, hard code a fixed reduced value.  For next release,
there is a better solution which uses result of host offload
negotiation.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings

vme: Fix wrong pointer utilization in ca91cx42_slave_get

2017-03-16T02:18:42+00:00

commit c8a6a09c1c617402cc9254b2bc8da359a0347d75 upstream.

In ca91cx42_slave_get function, the value pointed by vme_base pointer is
set through:

*vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]);

So it must be dereferenced to be used in calculation of pci_base:

*pci_base = (dma_addr_t)*vme_base + pci_offset;

This bug was caught thanks to the following gcc warning:

drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’:
drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
*pci_base = (dma_addr_t)vme_base + pci_offset;

Signed-off-by: Augusto Mecking Caringi 
Acked-By: Martyn Welch 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

drm/gma500: Add compat ioctl

2017-03-16T02:18:24+00:00

commit 0a97c81a9717431e6c57ea845b59c3c345edce67 upstream.

Hook up drm_compat_ioctl to support 32-bit userspace on 64-bit kernels.
It turns out that N2600 and N2800 comes with 64-bit enabled. We
previously assumed there where no such systems out there.

Signed-off-by: Patrik Jakobsson 
Signed-off-by: Sean Paul 
Link: http://patchwork.freedesktop.org/patch/msgid/20161101144315.2955-1-patrik.r.jakobsson@gmail.com
[bwh: Backported to 3.2: adjust filename, indentation]
Signed-off-by: Ben Hutchings

staging: iio: ad7606: fix improper setting of oversampling pins

2017-03-16T02:18:23+00:00

commit b321a38d2407c7e425c54bc09be909a34e49f740 upstream.

The oversampling ratio is controlled using the oversampling pins,
OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control
bit.

The gpio connected to the OS2 pin is not being set correctly, only OS0
and OS1 pins are being set. Fix the typo to allow proper control of the
oversampling pins.

Signed-off-by: Eva Rachel Retuya 
Fixes: b9618c0 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Ben Hutchings

staging: iio: ad5933: avoid uninitialized variable in error case

2017-02-23T03:50:55+00:00

commit 34eee70a7b82b09dbda4cb453e0e21d460dae226 upstream.

The ad5933_i2c_read function returns an error code to indicate
whether it could read data or not. However ad5933_work() ignores
this return code and just accesses the data unconditionally,
which gets detected by gcc as a possible bug:

drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work':
drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized]

This adds minimal error handling so we only evaluate the
data if it was correctly read.

Link: https://patchwork.kernel.org/patch/8110281/
Signed-off-by: Arnd Bergmann 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

fs: Give dentry to inode_change_ok() instead of inode

2016-11-20T01:01:43+00:00

commit 31051c85b5e2aaaf6315f74c72a732673632a905 upstream.

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
[bwh: Backported to 3.2:
 - Drop changes to f2fs, lustre, orangefs, overlayfs
 - Adjust filenames, context
 - In nfsd, pass dentry to nfsd_sanitize_attrs()
 - In xfs, pass dentry to xfs_change_file_space(), xfs_set_mode(),
   xfs_setattr_nonsize(), and xfs_setattr_size()
 - Update ext3 as well
 - Mark pohmelfs as BROKEN; it's long dead upstream]
Signed-off-by: Ben Hutchings

iio: accel: kxsd9: Fix scaling bug

2016-11-20T01:01:36+00:00

commit 307fe9dd11ae44d4f8881ee449a7cbac36e1f5de upstream.

All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.

However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:

$cat in_accel_scale
-1057462640.011978

Fix this by assigning zero to the integer part.

Tested-by: Jonathan Cameron 
Signed-off-by: Linus Walleij 
Signed-off-by: Jonathan Cameron 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings