linux-stable.git/drivers/staging, branch v3.12.7 Linux kernel stable tree staging: comedi: drivers: fix return value of comedi_load_firmware() 2014-01-09T20:25:07+00:00 H Hartley Sweeten hsweeten@visionengravers.com 2013-12-10T23:31:25+00:00 bec1a4f8696c44ce96398dceab8aba4785ec8ea9 commit c6236c0ce39c809c336ca929f68cf8ad02cf94e0 upstream. Some of the callback functions that upload the firmware in the comedi drivers return a positive value indicating the number of bytes sent to the device. Detect this condition and just return '0' to indicate a successful upload. Reported-by: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c6236c0ce39c809c336ca929f68cf8ad02cf94e0 upstream.

Some of the callback functions that upload the firmware in the comedi
drivers return a positive value indicating the number of bytes sent
to the device. Detect this condition and just return '0' to indicate
a successful upload.

Reported-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255_pci: fix for newer PCI-DIO48H 2014-01-09T20:25:07+00:00 Ian Abbott abbotti@mev.co.uk 2013-12-13T12:00:30+00:00 4f66e9d70edf73e796486199f847ad5402bf0eac commit 0283f7a100882684ad32b768f9f1ad81658a0b92 upstream. At some point, Measurement Computing / ComputerBoards redesigned the PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip. This meant they had to put their hardware registers in the PCI BAR 2 region instead of PCI BAR 1. Unfortunately, they kept the same PCI device ID for the new design. This means the driver recognizes the newer cards, but doesn't work (and is likely to screw up the local configuration registers of the PLX chip) because it's using the wrong region. Since the PCI subvendor and subdevice IDs were both zero on the old design, but are the same as the vendor and device on the new design, we can tell the old design and new design apart easily enough. Split the existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new entries, referenced by different entries in the PCI device ID table `pci_8255_pci_table[]`. Use the same board name for both entries. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0283f7a100882684ad32b768f9f1ad81658a0b92 upstream.

At some point, Measurement Computing / ComputerBoards redesigned the
PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip.
This meant they had to put their hardware registers in the PCI BAR 2
region instead of PCI BAR 1.  Unfortunately, they kept the same PCI
device ID for the new design.  This means the driver recognizes the
newer cards, but doesn't work (and is likely to screw up the local
configuration registers of the PLX chip) because it's using the wrong
region.

Since  the PCI subvendor and subdevice IDs were both zero on the old
design, but are the same as the vendor and device on the new design, we
can tell the old design and new design apart easily enough.  Split the
existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new
entries, referenced by different entries in the PCI device ID table
`pci_8255_pci_table[]`.  Use the same board name for both entries.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ssv_dnp: use comedi_dio_update_state() 2013-12-20T15:49:07+00:00 H Hartley Sweeten hsweeten@visionengravers.com 2013-08-30T18:08:50+00:00 d7c1c86614a9207fbeb5312497024adb8e06f222 commit f6b316bcd8c421acd6fa5a6e18b4c846ecb9d965 upstream. Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state. Also, fix a bug where the state of the channels is returned in data[0]. The comedi core expects it to be returned in data[1]. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f6b316bcd8c421acd6fa5a6e18b4c846ecb9d965 upstream.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Also, fix a bug where the state of the channels is returned in data[0].
The comedi core expects it to be returned in data[1].

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: use comedi_dio_update_state() for simple cases 2013-12-20T15:49:07+00:00 H Hartley Sweeten hsweeten@visionengravers.com 2013-08-30T18:05:58+00:00 dd8533bb013a03dd4290c6dee078602c37b9c40d commit 97f4289ad08cffe55de06d4ac4f89ac540450aee upstream. [Split from original patch subject: "staging: comedi: drivers: use comedi_dio_update_state() for simple cases"] Use comedi_dio_update_state() to handle the boilerplate code to update the subdevice s->state for simple cases where the hardware is updated when any channel is modified. Also, fix a bug in the amplc_pc263 and amplc_pci263 drivers where the current state is not returned in data[1]. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 97f4289ad08cffe55de06d4ac4f89ac540450aee upstream.

[Split from original patch subject: "staging: comedi: drivers: use
comedi_dio_update_state() for simple cases"]

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state for simple cases where the hardware is updated
when any channel is modified.

Also, fix a bug in the amplc_pc263 and amplc_pci263 drivers where the
current state is not returned in data[1].

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: lirc_zilog: Don't use dynamic static allocation 2013-12-04T19:06:33+00:00 Mauro Carvalho Chehab m.chehab@samsung.com 2013-11-02T11:16:47+00:00 282e059380646cb413fb3917ba9035032cd6d986 commit ac5b4b6bf0c84c48d7e2e3fce22e35b04282ba76 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and ompilation complains about it on some archs: drivers/staging/media/lirc/lirc_zilog.c:967:1: warning: 'read' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be 64. That should be more than enough. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ac5b4b6bf0c84c48d7e2e3fce22e35b04282ba76 upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
ompilation complains about it on some archs:
	drivers/staging/media/lirc/lirc_zilog.c:967:1: warning: 'read' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be 64. That should
be more than enough.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: r8188eu: Fix AP mode 2013-12-04T19:05:08+00:00 Larry Finger Larry.Finger@lwfinger.net 2013-11-17T19:32:15+00:00 3abc0136db2c66b7606aebe2492efb6e09801c3d commit 9ecfc0f45033584ec58617cf6ec37f75833d97e8 upstream. Two code lines were accidentally deleted. Restore them. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9ecfc0f45033584ec58617cf6ec37f75833d97e8 upstream.

Two code lines were accidentally deleted.  Restore them.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6656: [BUG] Fix for TX USB resets from vendors driver. 2013-12-04T19:05:08+00:00 Malcolm Priestley tvboxspy@gmail.com 2013-11-07T21:49:04+00:00 ac842813d154695c1c644ff7ea4a53dafa70b6a3 commit 9df682927c2e3a92f43803d6b52095992e3b2ab8 upstream. This fixes resets on heavy TX data traffic. Vendor driver VT6656_Linux_src_v1.21.03_x86_11.04.zip http://www.viaembedded.com/servlet/downloadSvl?id=1890&download_file_id=14704 This is GPL-licensed code. original code BBbVT3184Init ... //2007-0725, RobertChang add, Enable Squelch detect reset option(SQ_RST_Opt), USB (register4, bit1) CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, (WORD)0x600+4, // USB's Reg4's bit1 MESSAGE_REQUEST_MEM, 1, (PBYTE) &byData); byData = byData|2 ; CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, (WORD)0x600+4, // USB's Reg4's bit1 MESSAGE_REQUEST_MEM, 1, (PBYTE) &byData); return TRUE;//ntStatus; .... A back port patch is needed for kernels less than 3.10. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9df682927c2e3a92f43803d6b52095992e3b2ab8 upstream.

This fixes resets on heavy TX data traffic.

Vendor driver
VT6656_Linux_src_v1.21.03_x86_11.04.zip
http://www.viaembedded.com/servlet/downloadSvl?id=1890&download_file_id=14704
This is GPL-licensed code.

original code
BBbVT3184Init
...
//2007-0725, RobertChang add, Enable Squelch detect reset option(SQ_RST_Opt), USB (register4, bit1)
CONTROLnsRequestIn(pDevice,
                                 MESSAGE_TYPE_READ,
                                 (WORD)0x600+4,     // USB's Reg4's bit1
                                 MESSAGE_REQUEST_MEM,
                                 1,
                                 (PBYTE) &byData);
byData = byData|2 ;
CONTROLnsRequestOut(pDevice,
                              MESSAGE_TYPE_WRITE,
                              (WORD)0x600+4,     // USB's Reg4's bit1
                              MESSAGE_REQUEST_MEM,
                              1,
                              (PBYTE) &byData);

return TRUE;//ntStatus;
....

A back port patch is needed for kernels less than 3.10.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Staging: zram: Fix memory leak by refcount mismatch 2013-12-04T19:05:08+00:00 Rashika Kheria rashika.kheria@gmail.com 2013-11-10T16:43:53+00:00 9005babc7627671a63836176ab4c1503376ad2c8 commit 1b672224d128ec2570eb37572ff803cfe452b4f7 upstream. As suggested by Minchan Kim and Jerome Marchand "The code in reset_store get the block device (bdget_disk()) but it does not put it (bdput()) when it's done using it. The usage count is therefore incremented but never decremented." This patch also puts bdput() for all error cases. Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1b672224d128ec2570eb37572ff803cfe452b4f7 upstream.

As suggested by Minchan Kim and Jerome Marchand "The code in reset_store
get the block device (bdget_disk()) but it does not put it (bdput()) when
it's done using it. The usage count is therefore incremented but never
decremented."

This patch also puts bdput() for all error cases.

Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: zsmalloc: Ensure handle is never 0 on success 2013-12-04T19:05:07+00:00 Olav Haugan ohaugan@codeaurora.org 2013-11-22T17:30:41+00:00 40141c33b0615e8e60173608e49762ab4944c7ac commit 67296874eb1cc80317bf2a8fba22b494e21eb29b upstream. zsmalloc encodes a handle using the pfn and an object index. On hardware platforms with physical memory starting at 0x0 the pfn can be 0. This causes the encoded handle to be 0 and is incorrectly interpreted as an allocation failure. This issue affects all current and future SoCs with physical memory starting at 0x0. All MSM8974 SoCs which includes Google Nexus 5 devices are affected. To prevent this false error we ensure that the encoded handle will not be 0 when allocation succeeds. Signed-off-by: Olav Haugan <ohaugan@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 67296874eb1cc80317bf2a8fba22b494e21eb29b upstream.

zsmalloc encodes a handle using the pfn and an object
index. On hardware platforms with physical memory starting
at 0x0 the pfn can be 0. This causes the encoded handle to be
0 and is incorrectly interpreted as an allocation failure.

This issue affects all current and future SoCs with physical
memory starting at 0x0. All MSM8974 SoCs which includes
Google Nexus 5 devices are affected.

To prevent this false error we ensure that the encoded handle
will not be 0 when allocation succeeds.

Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre/ptlrpc: fix ptlrpc_stop_pinger logic 2013-12-04T19:05:07+00:00 Peng Tao bergwolf@gmail.com 2013-11-21T14:42:45+00:00 b8c60a6614e577e5525f6369885ab2350478ff5b commit b39f15c972c462903208531b82f9b34ba8ef3ec0 upstream. It was introduced due to a patch hunk when porting commit 20802057 (staging/lustre/ptlrpc: race in pinger). Cc: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b39f15c972c462903208531b82f9b34ba8ef3ec0 upstream.

It was introduced due to a patch hunk when porting
commit 20802057 (staging/lustre/ptlrpc: race in pinger).

Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>