commit c7caf4d4c56aee40b995f5858ccf1c814f3d2da2 upstream.

Add USB ID for Sitecom WLA-2000 v1.001 WLAN.

Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h

It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/rtl8187se/,
drivers/staging/rtl8192e/, drivers/staging/rtl8192u/ &
drivers/staging/rtl8712/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fixes scripts/checkpatch.pl warning.

Signed-off-by: Michael Fiedler <michael.fiedler@informatik.stud.uni-erlangen.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fixes warning from scripts/checkpatch.pl.

Signed-off-by: Michael Fiedler <michael.fiedler@informatik.stud.uni-erlangen.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

According to scripts/checkpatch.pl, the __packed macro
from linux/compiler.h should be used.

Signed-off-by: Michael Fiedler <michael.fiedler@informatik.stud.uni-erlangen.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There is already a macro defined in linux/compiler.h.

Signed-off-by: Michael Fiedler <michael.fiedler@informatik.stud.uni-erlangen.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Many stupid corrections of duplicated includes based on the output of
scripts/checkincludes.pl.

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Driver r8712u is unable to handle ad-hoc mode. The issue is that when
the driver first starts, there will not be an SSID for association.
The fix is to always call the "select and join from scan" routine when
in ad-hoc mode.

Note: Ad-hoc mode worked intermittently before. If the driver had
previously been associated, then things were OK.

Signed-off-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Done via perl script:

$ cat remove_semi_while.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces      = qr/(\{(?:[^\{\}]++|(?-1))*\})/;

foreach my $file (@ARGV) {
    my $f;
    my $text;
    my $oldtext;

    next if ((-d $file));

    open($f, '<', $file)
	or die "$P: Can't open $file for read\n";
    $oldtext = do { local($/) ; <$f> };
    close($f);

    next if ($oldtext eq "");

    $text = $oldtext;

    my $count = 0;
    do {
	$count = 0;
	$count += $text =~ s@\b(while\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
    } while ($count > 0);

    if ($text ne $oldtext) {
	my $newfile = $file;

	open($f, '>', $newfile)
	    or die "$P: Can't open $newfile for write\n";
	print $f $text;
	close($f);
    }
}

$

One false positive removed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>