isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.

As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
corruption and a use-after-free the next time the list is walked.

The remove path already does the right thing by calling
isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on
the probe error path so the notifier is unregistered and cleaned up
before the device is torn down.

Fixes: a516d36bdc3d ("media: staging/ipu7: add IPU7 input system device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

isys_notifier_init() initialises a v4l2 async notifier and then, for
each CSI-2 port, adds a remote sensor subdev to the notifier's
waiting_list via v4l2_async_nf_add_fwnode_remote(), which allocates a
sensor_async_sd descriptor and takes a fwnode reference.

If parsing or adding a later port fails, the code jumps to the
"err_parse" label, which only drops the current endpoint fwnode
reference and returns, without calling v4l2_async_nf_cleanup(). Any
descriptors already added to the notifier for earlier ports are
therefore leaked, and the caller's error path does not clean up the
notifier either.

Call v4l2_async_nf_cleanup() on the error path, matching the cleanup
already performed when v4l2_async_nf_register() fails. This is safe as
the notifier is always initialised before the loop is entered.

Fixes: a516d36bdc3d ("media: staging/ipu7: add IPU7 input system device driver")
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Wrap long function arguments under the starting
parentheses because of line length style warning
reported by checkpatch.pl

Signed-off-by: Faisal Mukhtar <mukhtarfaisal03@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

In cedrus_init_ctrls(), the V4L2 control handler is initialized before
allocating memory for ctx->ctrls. If this allocation fails, the function
returns -ENOMEM without freeing the previously allocated handler
resources, leading to a memory leak.

Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation
failure path.

The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.

An x86_64 allyesconfig build showed no new warnings. As we do not have an
Allwinner SoC or board with a Cedrus VPU available to test with, no
runtime testing was able to be performed.

Fixes: 50e761516f2b ("media: platform: Add Cedrus VPU decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

When VIDIOC_TRY_FMT is called with an unsupported pixel format on the
OUTPUT queue, vdec_try_fmt_common() falls back to V4L2_PIX_FMT_MPEG2.
However, if a distro has locally patched MPEG2 support out (as it has
been broken for some time) the platform format table does not contain
MPEG2 so find_format() returns NULL and the subsequent dereference of
fmt_out->max_width triggers a NULL pointer dereference.

Fix this by falling back to the first format in the platform's format
array instead of hardcoding V4L2_PIX_FMT_MPEG2. This is always valid
since every platform defines at least one format.

Fixes: 3e7f51bd9607 ("media: meson: add v4l2 m2m video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The atomisp code has been very heavily annotated in doxygen format.

Unfortunately, both doxygen and kernel-doc use the same mark for signify
the beginning of a comment (/**).

As a result of this, kernel-doc gets confused when it parses atomisp and
throws tons of warnings, which made us completely disable atomisp
kernel-doc checks in Media-CI.

Demote all the broken comments so we can have 100% coverage.

Future patches can convert the doxygen annotations to kernel-doc if this
is deemed useful.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

tegra_vi_channels_alloc() iterates over port nodes and skips those
whose reg property cannot be read or whose remote endpoint fails
v4l2_fwnode_endpoint_parse(), leaving the negative result of the
failed call in ret. If that happens on the last port node, the loop
ends with ret still negative and tegra_vi_init() fails the whole VI
probe.

The same defective port earlier in the ports node is skipped silently,
so probing succeeds or fails depending on the order of the port nodes.
The CSI equivalent, tegra_csi_channels_alloc(), returns 0
unconditionally after its loop and does not have this problem.

Use a separate variable for the per-port checks so that only fatal
errors end up in ret.

Fixes: 1ebaeb09830f ("media: tegra-video: Add support for external sensor capture")
Fixes: 2ac4035a78c9 ("media: tegra-video: Add support for x8 captures with gang ports")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Hao-Qun Huang <alvinhuang0603@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

tegra_vip_channel_of_parse() initializes np from dev->of_node without
taking a reference, but its error paths drop one through the
err_node_put label. This underflows the refcount of the VIP device's
OF node when endpoint parsing fails on a malformed device tree.

The only reference the function takes on np is the success-path
of_node_get() stored in vip->chan.of_node, and that one is already
released by the tegra_vip_init() error path and by tegra_vip_exit().

Return errors directly instead of jumping to the bogus cleanup label.

Fixes: e740d199cf0f ("staging: media: tegra-video: add support for Tegra20 parallel input")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Hao-Qun Huang <alvinhuang0603@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The existing tegra_vi_graph_build function relies heavily on a one-to-one
match between Device Tree nodes and media pad links. While this works for
simpler configurations, it causes issues when Device Tree nodes do not
match media pad link logic (e.g., mt9m114). Switch to the
media_entity_get_fwnode_pad helper to verify and retrieve the correct pad
linked to an endpoint, rather than assuming the endpoint ID matches the
pad ID.

Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The av7110_start_feed function contains heavily nested if-statements,
causing excessive indentation and violating code style guidelines.

Refactor the logic inside the DMX_MEMORY_FE case by inverting the
conditional check to break early. Additionally, remove the inner
'if (feed->ts_type & TS_DECODER)' check, as it is redundant since
the outer block already validates this condition.

This reduces the indentation level and cleans up redundant checks
without altering the underlying driver behavior.

Signed-off-by: André Moreira <andrem.33333@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>