linux-stable.git/drivers/staging/media, branch linux-5.0.y

media: cedrus: Add a quirk for not setting DMA offset

2019-05-31T13:45:19+00:00

[ Upstream commit 70a4f5cda82f7197c350099b66fd23506620810e ]

H6 VPU doesn't work if DMA offset is set.

Add a quirk for it.

Signed-off-by: Jernej Skrabec 
Acked-by: Maxime Ripard 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: staging: davinci_vpfe: disallow building with COMPILE_TEST

2019-05-31T13:45:18+00:00

[ Upstream commit 49dc762cffd8305a861ca649e82dc5533b3e3344 ]

The driver should really call dm365_isif_setup_pinmux() through a callback,
but uses a hack to include a davinci specific machine header file when
compile testing instead. This works almost everywhere, but not on the
ARM omap1 platform, which has another header named mach/mux.h. This
causes a build failure:

drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: implicit declaration of function 'davinci_cfg_reg' [-Werror,-Wimplicit-function-declaration]
        davinci_cfg_reg(DM365_VIN_CAM_WEN);
        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:18: error: use of undeclared identifier 'DM365_VIN_CAM_WEN'
        davinci_cfg_reg(DM365_VIN_CAM_WEN);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2029:18: error: use of undeclared identifier 'DM365_VIN_CAM_VD'
        davinci_cfg_reg(DM365_VIN_CAM_VD);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2030:18: error: use of undeclared identifier 'DM365_VIN_CAM_HD'
        davinci_cfg_reg(DM365_VIN_CAM_HD);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2031:18: error: use of undeclared identifier 'DM365_VIN_YIN4_7_EN'
        davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2032:18: error: use of undeclared identifier 'DM365_VIN_YIN0_3_EN'
        davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
                        ^
7 errors generated.

Exclude omap1 from compile-testing, under the assumption that all others
still work.

Fixes: 4907c73deefe ("media: staging: davinci_vpfe: allow building with COMPILE_TEST")

Signed-off-by: Arnd Bergmann 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: staging/intel-ipu3: mark PM function as __maybe_unused

2019-05-31T13:45:18+00:00

[ Upstream commit 948dff7cfa1d7653e7828e7b905863bd24ca5c02 ]

The imgu_rpm_dummy_cb() looks like an API misuse that is explained
in the comment above it. Aside from that, it also causes a warning
when power management support is disabled:

drivers/staging/media/ipu3/ipu3.c:794:12: error: 'imgu_rpm_dummy_cb' defined but not used [-Werror=unused-function]

The warning is at least easy to fix by marking the function as
__maybe_unused.

Fixes: 7fc7af649ca7 ("media: staging/intel-ipu3: Add imgu top level pci device driver")

Signed-off-by: Arnd Bergmann 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx: Clear fwnode link struct for each endpoint iteration

2019-05-25T16:22:05+00:00

commit 107927fa597c99eaeee4f51865ca0956ec71b6a2 upstream.

In imx_media_create_csi_of_links(), the 'struct v4l2_fwnode_link' must
be cleared for each endpoint iteration, otherwise if the remote port
has no "reg" property, link.remote_port will not be reset to zero.
This was discovered on the i.MX53 SMD board, since the OV5642 connects
directly to ipu1_csi0 and has a single source port with no "reg"
property.

Fixes: 621b08eabcddb ("media: staging/imx: remove static media link arrays")

Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx: csi: Allow unknown nearest upstream entities

2019-05-25T16:22:05+00:00

commit 904371f90b2c0c749a5ab75478c129a4682ac3d8 upstream.

On i.MX6, the nearest upstream entity to the CSI can only be the
CSI video muxes or the Synopsys DW MIPI CSI-2 receiver.

However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver.
So allow for the nearest upstream entity to the CSI to be something
other than those.

Fixes: bf3cfaa712e5c ("media: staging/imx: get CSI bus type from nearest
upstream entity")

Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: rockchip/vpu: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:35+00:00

[ Upstream commit 29701c3612fa025d5e8dc64c7a4ae8dc4763912e ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx: csi: Stop upstream before disabling IDMA channel

2019-03-23T19:11:39+00:00

commit 4bc1ab41eee9d02ad2483bf8f51a7b72e3504eba upstream.

Move upstream stream off to just after receiving the last EOF completion
and disabling the CSI (and thus before disabling the IDMA channel) in
csi_stop(). For symmetry also move upstream stream on to beginning of
csi_start().

Doing this makes csi_s_stream() more symmetric with prp_s_stream() which
will require the same change to fix a hard lockup.

Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org	# for 4.13 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx: csi: Disable CSI immediately after last EOF

2019-03-23T19:11:39+00:00

commit 2e0fe66e0a136252f4d89dbbccdcb26deb867eb8 upstream.

Disable the CSI immediately after receiving the last EOF before stream
off (and thus before disabling the IDMA channel). Do this by moving the
wait for EOF completion into a new function csi_idmac_wait_last_eof().

This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:

while true; do v4l2-ctl  -d4 --stream-mmap --stream-count=3; done

Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.

The lockup occurs when disabling the IDMA channel at stream off. Disabling
the CSI before disabling the IDMA channel appears to be a reliable fix for
the hard lockup.

Fixes: 4a34ec8e470cb ("[media] media: imx: Add CSI subdev driver")

Reported-by: Gaël PORTAY 
Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org	# for 4.13 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx-csi: Input connections to CSI should be optional

2019-03-23T19:11:39+00:00

commit 337e90ed028643c7acdfd0d31e3224d05ca03d66 upstream.

Some imx platforms do not have fwnode connections to all CSI input
ports, and should not be treated as an error. This includes the
imx6q SabreAuto, which has no connections to ipu1_csi1 and ipu2_csi0.
Return -ENOTCONN in imx_csi_parse_endpoint() so that v4l2-fwnode
endpoint parsing will not treat an unconnected CSI input port as
an error.

Fixes: c893500a16baf ("media: imx: csi: Register a subdev notifier")

Signed-off-by: Steve Longerbeam 
Reviewed-by: Philipp Zabel 
Acked-by: Tim Harvey 
Cc: stable@vger.kernel.org
Tested-by: Fabio Estevam 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imx: prpencvf: Stop upstream before disabling IDMA channel

2019-03-23T19:11:38+00:00

commit a19c22677377b87e4354f7306f46ad99bc982a9f upstream.

Upstream must be stopped immediately after receiving the last EOF and
before disabling the IDMA channel. This can be accomplished by moving
upstream stream off to just after receiving the last EOF completion in
prp_stop(). For symmetry also move upstream stream on to end of
prp_start().

This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:

while true; do v4l2-ctl  -d1 --stream-mmap --stream-count=3; done

Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.

The lockup occurs when disabling the IDMA channel at stream off. Stopping
the video data stream entering the IDMA channel before disabling the
channel itself appears to be a reliable fix for the hard lockup.

Fixes: f0d9c8924e2c3 ("[media] media: imx: Add IC subdev drivers")

Reported-by: Gaël PORTAY 
Tested-by: Gaël PORTAY 
Signed-off-by: Steve Longerbeam 
Cc: stable@vger.kernel.org	# for 4.13 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman