linux-stable.git/drivers/staging/comedi, branch linux-4.9.y

comedi: vmk80xx: fix expression for tx buffer size

2022-06-25T09:45:18+00:00

commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream.

The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`).  Fix it.

Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold 
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold 
Signed-off-by: Ian Abbott 
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman

comedi: vmk80xx: fix bulk and interrupt message timeouts

2021-11-12T12:18:02+00:00

commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream.

USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.

Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold 
Reviewed-by: Ian Abbott 
Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

comedi: vmk80xx: fix bulk-buffer overflow

2021-11-12T12:18:02+00:00

commit 78cdfd62bd54af615fba9e3ca1ba35de39d3871d upstream.

The driver is using endpoint-sized buffers but must not assume that the
tx and rx buffers are of equal size or a malicious device could overflow
the slab-allocated receive buffer when doing bulk transfers.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold 
Reviewed-by: Ian Abbott 
Link: https://lore.kernel.org/r/20211025114532.4599-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

comedi: vmk80xx: fix transfer-buffer overflows

2021-11-12T12:18:02+00:00

commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream.

The driver uses endpoint-sized USB transfer buffers but up until
recently had no sanity checks on the sizes.

Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize
of usb endpoints found") inadvertently fixed NULL-pointer dereferences
when accessing the transfer buffers in case a malicious device has a
zero wMaxPacketSize.

Make sure to allocate buffers large enough to handle also the other
accesses that are done without a size check (e.g. byte 18 in
vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond
the buffers, for example, when doing descriptor fuzzing.

The original driver was for a low-speed device with 8-byte buffers.
Support was later added for a device that uses bulk transfers and is
presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold 
Reviewed-by: Ian Abbott 
Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

comedi: ni_usb6501: fix NULL-deref in command paths

2021-11-12T12:18:02+00:00

commit 907767da8f3a925b060c740e0b5c92ea7dbec440 upstream.

The driver uses endpoint-sized USB transfer buffers but had no sanity
checks on the sizes. This can lead to zero-size-pointer dereferences or
overflowed transfer buffers in ni6501_port_command() and
ni6501_counter_command() if a (malicious) device has smaller max-packet
sizes than expected (or when doing descriptor fuzz testing).

Add the missing sanity checks to probe().

Fixes: a03bb00e50ab ("staging: comedi: add NI USB-6501 support")
Cc: stable@vger.kernel.org      # 3.18
Cc: Luca Ellero 
Reviewed-by: Ian Abbott 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20211027093529.30896-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

comedi: dt9812: fix DMA buffers on stack

2021-11-12T12:18:02+00:00

commit 536de747bc48262225889a533db6650731ab25d3 upstream.

USB transfer buffers are typically mapped for DMA and must not be
allocated on the stack or transfers will fail.

Allocate proper transfer buffers in the various command helpers and
return an error on short transfers instead of acting on random stack
data.

Note that this also fixes a stack info leak on systems where DMA is not
used as 32 bytes are always sent to the device regardless of how short
the command is.

Fixes: 63274cd7d38a ("Staging: comedi: add usb dt9812 driver")
Cc: stable@vger.kernel.org      # 2.6.29
Reviewed-by: Ian Abbott 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

staging: comedi: cb_pcidas64: fix request_irq() warn

2021-04-07T10:05:39+00:00

[ Upstream commit d2d106fe3badfc3bf0dd3899d1c3f210c7203eab ]

request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()

[    1.565966] name 'pci-das6402/16'
[    1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[    1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0
[    1.574200] Call Trace:
[    1.574722]  proc_mkdir+0x18/0x20
[    1.576629]  request_threaded_irq+0xfe/0x160
[    1.576859]  auto_attach+0x60a/0xc40 [cb_pcidas64]

Suggested-by: Ian Abbott 
Reviewed-by: Ian Abbott 
Signed-off-by: Tong Zhang 
Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: comedi: cb_pcidas: fix request_irq() warn

2021-04-07T10:05:39+00:00

[ Upstream commit 2e5848a3d86f03024ae096478bdb892ab3d79131 ]

request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()

[    1.630764] name 'pci-das1602/16'
[    1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[    1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0
[    1.639441] Call Trace:
[    1.639976]  proc_mkdir+0x18/0x20
[    1.641946]  request_threaded_irq+0xfe/0x160
[    1.642186]  cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas]

Suggested-by: Ian Abbott 
Reviewed-by: Ian Abbott 
Signed-off-by: Tong Zhang 
Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

staging: comedi: pcl818: Fix endian problem for AI command data

2021-03-17T15:10:17+00:00

commit 148e34fd33d53740642db523724226de14ee5281 upstream.

The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format.  However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
parameter.  On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value.  Fix it by changing the type of the parameter
holding the sample value to `unsigned short`.

[Note: the bug was introduced in commit edf4537bcbf5 ("staging: comedi:
pcl818: use comedi_buf_write_samples()") but the patch applies better to
commit d615416de615 ("staging: comedi: pcl818: introduce
pcl818_ai_write_sample()").]

Fixes: d615416de615 ("staging: comedi: pcl818: introduce pcl818_ai_write_sample()")
Cc:  # 4.0+
Signed-off-by: Ian Abbott 
Link: https://lore.kernel.org/r/20210223143055.257402-10-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman

staging: comedi: pcl711: Fix endian problem for AI command data

2021-03-17T15:10:17+00:00

commit a084303a645896e834883f2c5170d044410dfdb3 upstream.

The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format.  However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable.  On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value.  Fix it by changing the type of the variable
holding the sample value to `unsigned short`.

Fixes: 1f44c034de2e ("staging: comedi: pcl711: use comedi_buf_write_samples()")
Cc:  # 3.19+
Signed-off-by: Ian Abbott 
Link: https://lore.kernel.org/r/20210223143055.257402-9-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman