linux-stable.git/drivers/staging/comedi, branch linux-3.12.y

staging: comedi: daqboard2000: bug fix board type matching code

2016-09-23T07:29:23+00:00

commit 80e162ee9b31d77d851b10f8c5299132be1e120f upstream.

`daqboard2000_find_boardinfo()` is supposed to check if the
DaqBoard/2000 series model is supported, based on the PCI subvendor and
subdevice ID.  The current code is wrong as it is comparing the PCI
device's subdevice ID to an expected, fixed value for the subvendor ID.
It should be comparing the PCI device's subvendor ID to this fixed
value.  Correct it.

Fixes: 7e8401b23e7f ("staging: comedi: daqboard2000: add back subsystem_device check")
Signed-off-by: Ian Abbott 
Signed-off-by: Jiri Slaby

staging: comedi: adl_pci7x3x: fix digital output on PCI-7230

2015-09-18T07:26:31+00:00

commit ad83dbd974feb2e2a8cc071a1d28782bd4d2c70e upstream

The "adl_pci7x3x" driver replaced the "adl_pci7230" and "adl_pci7432"
drivers in commits 8f567c373c4b ("staging: comedi: new adl_pci7x3x
driver") and 657f77d173d3 ("staging: comedi: remove adl_pci7230 and
adl_pci7432 drivers").  Although the new driver code agrees with the
user manuals for the respective boards, digital outputs stopped working
on the PCI-7230.  This has 16 digital output channels and the previous
adl_pci7230 driver shifted the 16 bit output state left by 16 bits
before writing to the hardware register.  The new adl_pci7x3x driver
doesn't do that.  Fix it in `adl_pci7x3x_do_insn_bits()` by checking
for the special case of the subdevice having only 16 channels and
duplicating the 16 bit output state into both halves of the 32-bit
register.  That should work both for what the board actually does and
for what the user manual says it should do.

Fixes: 8f567c373c4b ("staging: comedi: new adl_pci7x3x driver")
Signed-off-by: Ian Abbott 
Signed-off-by: Jiri Slaby

staging: comedi: usbduxsigma: don't clobber ao_timer in command test

2015-09-18T07:26:30+00:00

commit c04a1f17803e0d3eeada586ca34a6b436959bc20 upstream

`devpriv->ao_timer` is used while an asynchronous command is running on
the AO subdevice.  It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands,
`usbduxsigma_ao_cmdtest()`, which is not correct as it's allowed to
check new commands while an old command is still running.  Fix it by
moving the code which sets up `devpriv->ao_timer` into the subdevice's
`cmd` handler, `usbduxsigma_ao_cmd()`.

** This backported patch also moves the code that sets up
`devpriv->ao_sample_count` and `devpriv->ao_continuous` from
`usbduxsigma_ao_cmdtest()` to `usbduxsigma_ao_cmd()` for the same reason
as above.  (This was not needed in the upstream commit.) **

Note that the removed code in `usbduxsigma_ao_cmdtest()` checked that
`devpriv->ao_timer` did not end up less that 1, but that could not
happen due because `cmd->scan_begin_arg` or `cmd->convert_arg` had
already been range-checked.

Also note that we tested the `high_speed` variable in the old code, but
that is currently always 0 and means that we always use "scan" timing
(`cmd->scan_begin_src == TRIG_TIMER` and `cmd->convert_src == TRIG_NOW`)
and never "convert" (individual sample) timing (`cmd->scan_begin_src ==
TRIG_FOLLOW` and `cmd->convert_src == TRIG_TIMER`).  The moved code
tests `cmd->convert_src` instead to decide whether "scan" or "convert"
timing is being used, although currently only "scan" timing is
supported.

Fixes: fb1ef622e7a3 ("staging: comedi: usbduxsigma: tidy up analog output command support")
Signed-off-by: Ian Abbott 
Signed-off-by: Jiri Slaby

staging: comedi: usbduxsigma: don't clobber ai_timer in command test

2015-09-18T07:26:30+00:00

commit 423b24c37dd5794a674c74b0ed56392003a69891 upstream

`devpriv->ai_timer` is used while an asynchronous command is running on
the AI subdevice.  It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands
(`usbduxsigma_ai_cmdtest()`), which is not correct as it's allowed to
check new commands while an old command is still running.  Fix it by
moving the code which sets up `devpriv->ai_timer` and
`devpriv->ai_interval` into the subdevice's `cmd` handler,
`usbduxsigma_ai_cmd()`.

** This backported patch also moves the code that sets up
`devpriv->ai_sample_count` and `devpriv->ai_continuous` from
`usbduxsigma_ai_cmdtest()` to `usbduxsigma_ai_cmd()` for the same reason
as above. (This was not needed in the upstream commit.) **

Note that the removed code in `usbduxsigma_ai_cmdtest()` checked that
`devpriv->ai_timer` did not end up less than than 1, but that could not
happen because `cmd->scan_begin_arg` had already been checked to be at
least the minimum required value (at least when `cmd->scan_begin_src ==
TRIG_TIMER`, which had also been checked to be the case).

Fixes: b986be8527c7 ("staging: comedi: usbduxsigma: tidy up analog input command support)
Signed-off-by: Ian Abbott 
Signed-off-by: Jiri Slaby

staging: comedi: comedi_compat32.c: fix COMEDI_CMD copy back

2015-03-16T13:58:16+00:00

commit 42b8ce6f55facfa101462e694d33fc6bca471138 upstream.

`do_cmd_ioctl()` in "comedi_fops.c" handles the `COMEDI_CMD` ioctl.
This returns `-EAGAIN` if it has copied a modified `struct comedi_cmd`
back to user-space.  (This occurs when the low-level Comedi driver's
`do_cmdtest()` handler returns non-zero to indicate a problem with the
contents of the `struct comedi_cmd`, or when the `struct comedi_cmd` has
the `CMDF_BOGUS` flag set.)

`compat_cmd()` in "comedi_compat32.c" handles the 32-bit compatible
version of the `COMEDI_CMD` ioctl.  Currently, it never copies a 32-bit
compatible version of `struct comedi_cmd` back to user-space, which is
at odds with the way the regular `COMEDI_CMD` ioctl is handled.  To fix
it, change `compat_cmd()` to copy a 32-bit compatible version of the
`struct comedi_cmd` back to user-space when the main ioctl handler
returns `-EAGAIN`.

Signed-off-by: Ian Abbott 
Reviewed-by: H Hartley Sweeten 
Signed-off-by: Jiri Slaby 
Signed-off-by: Jiri Slaby

staging: comedi: cb_pcidas64: fix incorrect AI range code handling

2015-03-05T14:37:14+00:00

commit be8e89087ec2d2c8a1ad1e3db64bf4efdfc3c298 upstream.

The hardware range code values and list of valid ranges for the AI
subdevice is incorrect for several supported boards.  The hardware range
code values for all boards except PCI-DAS4020/12 is determined by
calling `ai_range_bits_6xxx()` based on the maximum voltage of the range
and whether it is bipolar or unipolar, however it only returns the
correct hardware range code for the PCI-DAS60xx boards.  For
PCI-DAS6402/16 (and /12) it returns the wrong code for the unipolar
ranges.  For PCI-DAS64/Mx/16 it returns the wrong code for all the
ranges and the comedi range table is incorrect.

Change `ai_range_bits_6xxx()` to use a look-up table pointed to by new
member `ai_range_codes` of `struct pcidas64_board` to map the comedi
range table indices to the hardware range codes.  Use a new comedi range
table for the PCI-DAS64/Mx/16 boards (and the commented out variants).

Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

staging: comedi: ni_daq_700: add mux settling delay

2014-06-20T15:34:05+00:00

commit ffed54dced86723f352323f15789d9ad6bee25e1 upstream.

I got a patch from the original author, Fred Brooks, to add a small
settling delay after setting the AI channel multiplexor.  The lack of
delay resulted in unstable or scrambled data on faster processors.

Signed-off-by: Ian Abbott 
Reported-by: Fred Brooks 
Signed-off-by: Jiri Slaby

staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data

2014-05-15T07:55:00+00:00

commit 2704f807f9498054b8153002bafa3e818079e9a5 upstream.

In usbdux_ao_cmd(), the channels for the command are transfered from the
cmd->chanlist and stored in the private data 'ao_chanlist'. The channel
numbers are bit-shifted when stored so that they become the "command"
that is transfered to the device. The channel to command conversion
results in the 'ao_chanlist' having these values for the channels:

  channel 0 -> ao_chanlist = 0x00
  channel 1 -> ao_chanlist = 0x40
  channel 2 -> ao_chanlist = 0x80
  channel 3 -> ao_chanlist = 0xc0

The problem is, the usbduxsub_ao_isoc_irq() function uses the 'chan' value
from 'ao_chanlist' to access the 'ao_readback' array in the private data.
So instead of accessing the array as 0, 1, 2, 3, it accesses it as 0x00,
0x40, 0x80, 0xc0.

Fix this by storing the raw channel number in 'ao_chanlist' and doing the
bit-shift when creating the command.

Fixes: a998a3db530bff80 "staging: comedi: usbdux: cleanup the private data 'outBuffer'"
Signed-off-by: H Hartley Sweeten 
Reviewed-by: Ian Abbott 
Acked-by: Bernd Porr 
Signed-off-by: Jiri Slaby

staging: comedi: 8255_pci: initialize MITE data window

2014-05-05T12:24:37+00:00

commit 268d1e799663b795cba15c64f5d29407786a9dd4 upstream.

According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User
Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and
written to register offset 0xC0 in the "MITE" registers (BAR0).  Do so
during initialization of the National Instruments boards handled by the
"8255_pci" driver.  The boards were previously handled by the
"ni_pcidio" driver, where the initialization was done by `mite_setup()`
in the "mite" module.  The "mite" module comes with too much extra
baggage for the "8255_pci" driver to deal with so use a local, simpler
initialization function.

Signed-off-by: Ian Abbott 
Signed-off-by: Jiri Slaby

staging: comedi: adv_pci1710: fix analog output readback value

2014-02-22T21:32:27+00:00

commit 1e85c1ea1ff2a60659e790ef8ec76c7339445841 upstream.

The last value written to a analog output channel is cached in the
private data of this driver for readback.

Currently, the wrong value is cached in the (*insn_write) functions.
The current code stores the data[n] value for readback afer the loop
has written all the values. At this time 'n' points past the end of
the data array.

Fix the functions by using a local variable to hold the data being
written to the analog output channel. This variable is then used
after the loop is complete to store the readback value. The current
value is retrieved before the loop in case no values are actually
written..

Signed-off-by: H Hartley Sweeten 
Reviewed-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman