linux-stable.git/drivers/spi, branch v5.4.7 Linux kernel stable tree spi: fsl: use platform_get_irq() instead of of_irq_to_resource() 2019-12-31T15:46:06+00:00 Christophe Leroy christophe.leroy@c-s.fr 2019-12-12T17:47:24+00:00 2ff988de621ac896d5dd9a0139b0da3027891249 commit 63aa6a692595d47a0785297b481072086b9272d2 upstream. Unlike irq_of_parse_and_map() which has a dummy definition on SPARC, of_irq_to_resource() hasn't. But as platform_get_irq() can be used instead and is generic, use it. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Mark Brown <broonie@kernel.org> Fixes: 3194d2533eff ("spi: fsl: don't map irq during probe") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.fr Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 63aa6a692595d47a0785297b481072086b9272d2 upstream.

Unlike irq_of_parse_and_map() which has a dummy definition on SPARC,
of_irq_to_resource() hasn't.

But as platform_get_irq() can be used instead and is generic, use it.

Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 	3194d2533eff ("spi: fsl: don't map irq during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spi: fsl: don't map irq during probe 2019-12-31T15:46:06+00:00 Christophe Leroy christophe.leroy@c-s.fr 2019-12-09T15:27:27+00:00 dac29ae0df4c53e18a61898014e6a1ec553fc13b commit 3194d2533efffae8b815d84729ecc58b6a9000ab upstream. With lastest kernel, the following warning is observed at startup: [ 1.500609] ------------[ cut here ]------------ [ 1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi' [ 1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0 [ 1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564 [ 1.530724] NIP: c0197694 LR: c0197694 CTR: c0050d80 [ 1.535762] REGS: df4a5af0 TRAP: 0700 Not tainted (5.4.0-02248-g93532430a4ff) [ 1.543818] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22028222 XER: 00000000 [ 1.550524] [ 1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010 [ 1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000 [ 1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078 [ 1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3 [ 1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.595829] Call Trace: [ 1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable) [ 1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70 [ 1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80 [ 1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8 [ 1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc [ 1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4 [ 1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418 [ 1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0 [ 1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128 [ 1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc [ 1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c [ 1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100 [ 1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c [ 1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c [ 1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0 [ 1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4 [ 1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4 [ 1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204 [ 1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110 [ 1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c [ 1.719926] Instruction dump: [ 1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78 [ 1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78 [ 1.738556] ---[ end trace 05d0720bf2e352e2 ]--- The problem comes from the error path which calls irq_dispose_mapping() while the IRQ has been requested with devm_request_irq(). IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only need is to get the IRQ virtual number. For that, use of_irq_to_resource() instead of the irq_of_parse_and_map()/irq_dispose_mapping() pair. Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3194d2533efffae8b815d84729ecc58b6a9000ab upstream.

With lastest kernel, the following warning is observed at startup:

[    1.500609] ------------[ cut here ]------------
[    1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi'
[    1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0
[    1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564
[    1.530724] NIP:  c0197694 LR: c0197694 CTR: c0050d80
[    1.535762] REGS: df4a5af0 TRAP: 0700   Not tainted  (5.4.0-02248-g93532430a4ff)
[    1.543818] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 22028222  XER: 00000000
[    1.550524]
[    1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010
[    1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000
[    1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078
[    1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3
[    1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0
[    1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0
[    1.595829] Call Trace:
[    1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable)
[    1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70
[    1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80
[    1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8
[    1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc
[    1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4
[    1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418
[    1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0
[    1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128
[    1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc
[    1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c
[    1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100
[    1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c
[    1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c
[    1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0
[    1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4
[    1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4
[    1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204
[    1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110
[    1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c
[    1.719926] Instruction dump:
[    1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78
[    1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78
[    1.738556] ---[ end trace 05d0720bf2e352e2 ]---

The problem comes from the error path which calls
irq_dispose_mapping() while the IRQ has been requested with
devm_request_irq().

IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only
need is to get the IRQ virtual number. For that, use
of_irq_to_resource() instead of the
irq_of_parse_and_map()/irq_dispose_mapping() pair.

Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spi: cadence: Correct handling of native chipselect 2019-12-31T15:45:59+00:00 Charles Keepax ckeepax@opensource.cirrus.com 2019-11-26T16:41:40+00:00 dba56969cc9dcf51a60e910d0b8a5cf488585783 [ Upstream commit 61acd19f9c56fa0809285346bd0bd4a926ab0da0 ] To fix a regression on the Cadence SPI driver, this patch reverts commit 6046f5407ff0 ("spi: cadence: Fix default polarity of native chipselect"). This patch was not the correct fix for the issue. The SPI framework calls the set_cs line with the logic level it desires on the chip select line, as such the old is_high handling was correct. However, this was broken by the fact that before commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") all controllers that offered the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware chip selects. This caused the value passed into the driver to be inverted. Which unfortunately makes it look like a logical enable the chip select value. Since the core was corrected to not unconditionally apply SPI_CS_HIGH, the Cadence driver, whilst using the hardware chip select, will deselect the chip select every time we attempt to communicate with the device, which results in failed communications. Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 61acd19f9c56fa0809285346bd0bd4a926ab0da0 ]

To fix a regression on the Cadence SPI driver, this patch reverts
commit 6046f5407ff0 ("spi: cadence: Fix default polarity of native
chipselect").

This patch was not the correct fix for the issue. The SPI framework
calls the set_cs line with the logic level it desires on the chip select
line, as such the old is_high handling was correct. However, this was
broken by the fact that before commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") all controllers that offered
the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware
chip selects. This caused the value passed into the driver to be inverted.
Which unfortunately makes it look like a logical enable the chip select
value.

Since the core was corrected to not unconditionally apply SPI_CS_HIGH,
the Cadence driver, whilst using the hardware chip select, will deselect
the chip select every time we attempt to communicate with the device,
which results in failed communications.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: dw: Correct handling of native chipselect 2019-12-31T15:45:59+00:00 Charles Keepax ckeepax@opensource.cirrus.com 2019-11-27T15:39:36+00:00 68b0cbb1ad503faa0266a8bbe33f0b0af9db1c70 [ Upstream commit ada9e3fcc175db4538f5b5e05abf5dedf626e550 ] This patch reverts commit 6e0a32d6f376 ("spi: dw: Fix default polarity of native chipselect"). The SPI framework always called the set_cs callback with the logic level it desired on the chip select line, which is what the drivers original handling supported. commit f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") changed these symantics, but only in the case of drivers that also support GPIO chip selects, to true meaning apply slave select rather than logic high. This left things in an odd state where a driver that only supports hardware chip selects, the core would handle polarity but if the driver supported GPIOs as well the driver should handle polarity. At this point the reverted change was applied to change the logic in the driver to match new system. This was then broken by commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") which reverted the core back to consistently calling set_cs with a logic level. This fix reverts the driver code back to its original state to match the current core code. This is probably a better fix as a) the set_cs callback is always called with consistent symantics and b) the inversion for SPI_CS_HIGH can be handled in the core and doesn't need to be coded in each driver supporting it. Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191127153936.29719-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ada9e3fcc175db4538f5b5e05abf5dedf626e550 ]

This patch reverts commit 6e0a32d6f376 ("spi: dw: Fix default polarity
of native chipselect").

The SPI framework always called the set_cs callback with the logic
level it desired on the chip select line, which is what the drivers
original handling supported. commit f3186dd87669 ("spi: Optionally
use GPIO descriptors for CS GPIOs") changed these symantics, but only
in the case of drivers that also support GPIO chip selects, to true
meaning apply slave select rather than logic high. This left things in
an odd state where a driver that only supports hardware chip selects,
the core would handle polarity but if the driver supported GPIOs as
well the driver should handle polarity.  At this point the reverted
change was applied to change the logic in the driver to match new
system.

This was then broken by commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") which reverted the core back
to consistently calling set_cs with a logic level.

This fix reverts the driver code back to its original state to match
the current core code. This is probably a better fix as a) the set_cs
callback is always called with consistent symantics and b) the
inversion for SPI_CS_HIGH can be handled in the core and doesn't need
to be coded in each driver supporting it.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191127153936.29719-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: st-ssc4: add missed pm_runtime_disable 2019-12-31T15:45:37+00:00 Chuhong Yuan hslester96@gmail.com 2019-11-18T02:48:48+00:00 e83943268d0da0cc26bf13bddce864aa74ff402e [ Upstream commit cd050abeba2a95fe5374eec28ad2244617bcbab6 ] The driver forgets to call pm_runtime_disable in probe failure and remove. Add the missed calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118024848.21645-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cd050abeba2a95fe5374eec28ad2244617bcbab6 ]

The driver forgets to call pm_runtime_disable in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118024848.21645-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: tegra20-slink: add missed clk_unprepare 2019-12-31T15:45:33+00:00 Chuhong Yuan hslester96@gmail.com 2019-11-15T08:31:22+00:00 e2a8323cfc688e8e086df395721b562691256e9f [ Upstream commit 04358e40ba96d687c0811c21d9dede73f5244a98 ] The driver misses calling clk_unprepare in probe failure and remove. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 04358e40ba96d687c0811c21d9dede73f5244a98 ]

The driver misses calling clk_unprepare in probe failure and remove.
Add the calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: pxa2xx: Add missed security checks 2019-12-31T15:45:18+00:00 Chuhong Yuan hslester96@gmail.com 2019-11-09T08:09:43+00:00 98339b1498e62d1fa72fba96e83422d558988749 [ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ] pxa2xx_spi_init_pdata misses checks for devm_clk_get and platform_get_irq. Add checks for them to fix the bugs. Since ssp->clk and ssp->irq are used in probe, they are mandatory here. So we cannot use _optional() for devm_clk_get and platform_get_irq. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ]

pxa2xx_spi_init_pdata misses checks for devm_clk_get and
platform_get_irq.
Add checks for them to fix the bugs.

Since ssp->clk and ssp->irq are used in probe, they are mandatory here.
So we cannot use _optional() for devm_clk_get and platform_get_irq.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: img-spfi: fix potential double release 2019-12-31T15:44:46+00:00 Pan Bian bianpan2016@163.com 2019-11-06T02:36:09+00:00 cc492872180a5c58ac4166ca650d80468db97ba3 [ Upstream commit e9a8ba9769a0e354341bc6cc01b98aadcea1dfe9 ] The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they are released. As a result, they will be released again, either on the error handling branch in the same function or in the corresponding remove function, i.e. img_spfi_remove(). This patch fixes the bug by setting the two members to NULL. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/1573007769-20131-1-git-send-email-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e9a8ba9769a0e354341bc6cc01b98aadcea1dfe9 ]

The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they
are released. As a result, they will be released again, either on the
error handling branch in the same function or in the corresponding
remove function, i.e. img_spfi_remove(). This patch fixes the bug by
setting the two members to NULL.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/1573007769-20131-1-git-send-email-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: dw: Fix Designware SPI loopback 2019-12-31T15:44:45+00:00 Thor Thayer thor.thayer@linux.intel.com 2019-11-05T20:22:10+00:00 6431e1fb7b6ca5496aecedfce3a18c7ead236231 [ Upstream commit 1403cfa69d310781f9548951c97725c67ffcf613 ] The SPI_LOOP is set in spi->mode but not propagated to the register. A previous patch removed the bit during a cleanup. Fixes: e1bc204894ea ("spi: dw: fix potential variable assignment error") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Link: https://lore.kernel.org/r/1572985330-5525-1-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1403cfa69d310781f9548951c97725c67ffcf613 ]

The SPI_LOOP is set in spi->mode but not propagated to the register.
A previous patch removed the bit during a cleanup.

Fixes: e1bc204894ea ("spi: dw: fix potential variable assignment error")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Link: https://lore.kernel.org/r/1572985330-5525-1-git-send-email-thor.thayer@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: sifive: disable clk when probe fails and remove 2019-12-31T15:44:34+00:00 Chuhong Yuan hslester96@gmail.com 2019-11-01T12:17:45+00:00 b257b8a12828c5172ca8c10a3756c6fc7e2a14a2 [ Upstream commit a725272bda77e61c1b4de85c7b0c875b2ea639b6 ] The driver forgets to disable and unprepare clk when probe fails and remove. Add the calls to fix the problem. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com> Link: https://lore.kernel.org/r/20191101121745.13413-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a725272bda77e61c1b4de85c7b0c875b2ea639b6 ]

The driver forgets to disable and unprepare clk when probe fails and
remove.
Add the calls to fix the problem.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
Link: https://lore.kernel.org/r/20191101121745.13413-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>