linux-stable.git/drivers/spi, branch v5.4.63 Linux kernel stable tree spi: stm32: always perform registers configuration prior to transfer 2020-09-03T09:26:58+00:00 Alain Volmat alain.volmat@st.com 2020-08-10T07:12:38+00:00 d2da80e0a3e78dbebb98caa2d1c1fd44cc8c9c51 [ Upstream commit 60ccb3515fc61a0124c70aa37317f75b67560024 ] SPI registers content may have been lost upon suspend/resume sequence. So, always compute and apply the necessary configuration in stm32_spi_transfer_one_setup routine. Signed-off-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-6-git-send-email-alain.volmat@st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 60ccb3515fc61a0124c70aa37317f75b67560024 ]

SPI registers content may have been lost upon suspend/resume sequence.
So, always compute and apply the necessary configuration in
stm32_spi_transfer_one_setup routine.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-6-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate 2020-09-03T09:26:57+00:00 Amelie Delaunay amelie.delaunay@st.com 2020-08-10T07:12:36+00:00 2844685c661a60ccb6ede3f3b063cf9f749f626f [ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ] Fix spi->clk_rate when it is odd to the nearest lowest even value because minimum SPI divider is 2. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ]

Fix spi->clk_rate when it is odd to the nearest lowest even value because
minimum SPI divider is 2.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: stm32: fix fifo threshold level in case of short transfer 2020-09-03T09:26:57+00:00 Amelie Delaunay amelie.delaunay@st.com 2020-08-10T07:12:35+00:00 a6daa863d15e18d7c8c38e1560660b868e252b59 [ Upstream commit 3373e9004acc0603242622b4378c64bc01d21b5f ] When transfer is shorter than half of the fifo, set the data packet size up to transfer size instead of up to half of the fifo. Check also that threshold is set at least to 1 data frame. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-3-git-send-email-alain.volmat@st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3373e9004acc0603242622b4378c64bc01d21b5f ]

When transfer is shorter than half of the fifo, set the data packet size
up to transfer size instead of up to half of the fifo.
Check also that threshold is set at least to 1 data frame.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-3-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: stm32h7: fix race condition at end of transfer 2020-09-03T09:26:57+00:00 Antonio Borneo antonio.borneo@st.com 2020-08-10T07:12:34+00:00 3c15a3c4b155149d12ddafa69b19f97f881a7cfe [ Upstream commit 135dd873d3c76d812ae64c668adef3f2c59ed27f ] The caller of stm32_spi_transfer_one(), spi_transfer_one_message(), is waiting for us to call spi_finalize_current_transfer() and will eventually schedule a new transfer, if available. We should guarantee that the spi controller is really available before calling spi_finalize_current_transfer(). Move the call to spi_finalize_current_transfer() _after_ the call to stm32_spi_disable(). Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 135dd873d3c76d812ae64c668adef3f2c59ed27f ]

The caller of stm32_spi_transfer_one(), spi_transfer_one_message(),
is waiting for us to call spi_finalize_current_transfer() and will
eventually schedule a new transfer, if available.
We should guarantee that the spi controller is really available
before calling spi_finalize_current_transfer().

Move the call to spi_finalize_current_transfer() _after_ the call
to stm32_spi_disable().

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: stm32: clear only asserted irq flags on interrupt 2020-09-03T09:26:56+00:00 Tobias Schramm t.schramm@manjaro.org 2020-08-04T19:51:36+00:00 e4351ad44d7e8e16a9b885de543f72dd7d148134 [ Upstream commit ae1ba50f1e706dfd7ce402ac52c1f1f10becad68 ] Previously the stm32h7 interrupt thread cleared all non-masked interrupts. If an interrupt was to occur during the handling of another interrupt its flag would be unset, resulting in a lost interrupt. This patches fixes the issue by clearing only the currently set interrupt flags. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20200804195136.1485392-1-t.schramm@manjaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ae1ba50f1e706dfd7ce402ac52c1f1f10becad68 ]

Previously the stm32h7 interrupt thread cleared all non-masked interrupts.
If an interrupt was to occur during the handling of another interrupt its
flag would be unset, resulting in a lost interrupt.
This patches fixes the issue by clearing only the currently set interrupt
flags.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20200804195136.1485392-1-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: stm32: fixes suspend/resume management 2020-08-26T08:40:59+00:00 Amelie Delaunay amelie.delaunay@st.com 2020-08-10T07:12:37+00:00 233d6f2ab12098625bffe7c4876242afa9f7643b [ Upstream commit db96bf976a4fc65439be0b4524c0d41427d98814 ] This patch adds pinctrl power management, and reconfigure spi controller in case of resume. Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-5-git-send-email-alain.volmat@st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit db96bf976a4fc65439be0b4524c0d41427d98814 ]

This patch adds pinctrl power management, and reconfigure spi controller
in case of resume.

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-5-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: Prevent adding devices below an unregistering controller 2020-08-26T08:40:50+00:00 Lukas Wunner lukas@wunner.de 2020-08-03T11:09:01+00:00 3e538c536f0103a6e03288c4068ba3108dd3b6ce commit ddf75be47ca748f8b12d28ac64d624354fddf189 upstream. CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the same via sysfs. But there are no precautions to prevent adding a device below a controller that's being removed. Such a device is unusable and may not even be able to unbind cleanly as it becomes inaccessible once the controller has been torn down. E.g. it is then impossible to quiesce the device's interrupt. of_spi_notify() and acpi_spi_notify() do hold a ref on the controller, but otherwise run lockless against spi_unregister_controller(). Fix by holding the spi_add_lock in spi_unregister_controller() and bailing out of spi_add_device() if the controller has been unregistered concurrently. Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.19+ Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ddf75be47ca748f8b12d28ac64d624354fddf189 upstream.

CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime
using a DeviceTree overlay or DSDT patch.  CONFIG_SPI_SLAVE allows the
same via sysfs.

But there are no precautions to prevent adding a device below a
controller that's being removed.  Such a device is unusable and may not
even be able to unbind cleanly as it becomes inaccessible once the
controller has been torn down.  E.g. it is then impossible to quiesce
the device's interrupt.

of_spi_notify() and acpi_spi_notify() do hold a ref on the controller,
but otherwise run lockless against spi_unregister_controller().

Fix by holding the spi_add_lock in spi_unregister_controller() and
bailing out of spi_add_device() if the controller has been unregistered
concurrently.

Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.19+
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spi: spidev: Align buffers for DMA 2020-08-19T06:16:25+00:00 Christian Eggers ceggers@arri.de 2020-07-28T10:08:32+00:00 7ebb8fd40256e4b661b5d3a38fbbf4c404205fc5 commit aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7 upstream. Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7 upstream.

Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.

Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).

Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spi: lantiq-ssc: Fix warning by using WQ_MEM_RECLAIM 2020-08-19T06:16:14+00:00 Hauke Mehrtens hauke@hauke-m.de 2020-07-17T21:56:48+00:00 278b532dfeaf42fbcda8b69d0b7c4cb1e8eb9be0 [ Upstream commit ba3548cf29616b58c93bbaffc3d636898d009858 ] The lantiq-ssc driver uses internally an own workqueue to wait till the data is not only written out of the FIFO but really written to the wire. This workqueue is flushed while the SPI subsystem is working in some other system workqueue. The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag too to prevent this warning. This fixes the following warning: [ 2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184 [ 2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0 Fixes: 891b7c5fbf61 ("mtd_blkdevs: convert to blk-mq") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20200717215648.20522-1-hauke@hauke-m.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ba3548cf29616b58c93bbaffc3d636898d009858 ]

The lantiq-ssc driver uses internally an own workqueue to wait till the
data is not only written out of the FIFO but really written to the wire.
This workqueue is flushed while the SPI subsystem is working in some
other system workqueue.

The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in
the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag
too to prevent this warning.

This fixes the following warning:
[    2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184
[    2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0

Fixes: 891b7c5fbf61 ("mtd_blkdevs: convert to blk-mq")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20200717215648.20522-1-hauke@hauke-m.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: rockchip: Fix error in SPI slave pio read 2020-08-19T06:15:58+00:00 Jon Lin jon.lin@rock-chips.com 2020-07-23T00:43:56+00:00 9600bdd6924afecf1104ecc5f83e068f585c856f [ Upstream commit 4294e4accf8d695ea5605f6b189008b692e3e82c ] The RXFLR is possible larger than rx_left in Rockchip SPI, fix it. Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling") Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4294e4accf8d695ea5605f6b189008b692e3e82c ]

The RXFLR is possible larger than rx_left in Rockchip SPI, fix it.

Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling")
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20200723004356.6390-3-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>