linux-stable.git/drivers/spi, branch v5.4.47

spi: bcm-qspi: when tx/rx buffer is NULL set to 0

2020-06-17T14:40:30+00:00

commit 4df3bea7f9d2ddd9ac2c29ba945c7c4db2def29c upstream.

Currently we set the tx/rx buffer to 0xff when NULL. This causes
problems with some spi slaves where 0xff is a valid command. Looking
at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Justin Chen 
Signed-off-by: Kamal Dasu 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200420190853.45614-6-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: bcm-qspi: Handle clock probe deferral

2020-06-17T14:40:30+00:00

commit 0392727c261bab65a35cd4f82ee9459bc237591d upstream.

The clock provider may not be ready by the time spi-bcm-qspi gets
probed, handle probe deferral using devm_clk_get_optional().

Signed-off-by: Florian Fainelli 
Signed-off-by: Kamal Dasu 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200420190853.45614-2-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: bcm2835aux: Fix controller unregister order

2020-06-17T14:40:29+00:00

commit b9dd3f6d417258ad0beeb292a1bc74200149f15d upstream.

The BCM2835aux SPI driver uses devm_spi_register_master() on bind.
As a consequence, on unbind, __device_release_driver() first invokes
bcm2835aux_spi_remove() before unregistering the SPI controller via
devres_release_all().

This order is incorrect:  bcm2835aux_spi_remove() turns off the SPI
controller, including its interrupts and clock.  The SPI controller
is thus no longer usable.

When the SPI controller is subsequently unregistered, it unbinds all
its slave devices.  If their drivers need to access the SPI bus,
e.g. to quiesce their interrupts, unbinding will fail.

As a rule, devm_spi_register_master() must not be used if the
->remove() hook performs teardown steps which shall be performed
after unbinding of slaves.

Fix by using the non-devm variant spi_register_master().  Note that the
struct spi_master as well as the driver-private data are not freed until
after bcm2835aux_spi_remove() has finished, so accessing them is safe.

Fixes: 1ea29b39f4c8 ("spi: bcm2835aux: add bcm2835 auxiliary spi device driver")
Signed-off-by: Lukas Wunner 
Cc: stable@vger.kernel.org # v4.4+
Cc: Martin Sperl 
Link: https://lore.kernel.org/r/32f27f4d8242e4d75f9a53f7e8f1f77483b08669.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: bcm2835: Fix controller unregister order

2020-06-17T14:40:29+00:00

commit 9dd277ff92d06f6aa95b39936ad83981d781f49b upstream.

The BCM2835 SPI driver uses devm_spi_register_controller() on bind.
As a consequence, on unbind, __device_release_driver() first invokes
bcm2835_spi_remove() before unregistering the SPI controller via
devres_release_all().

This order is incorrect:  bcm2835_spi_remove() tears down the DMA
channels and turns off the SPI controller, including its interrupts
and clock.  The SPI controller is thus no longer usable.

When the SPI controller is subsequently unregistered, it unbinds all
its slave devices.  If their drivers need to access the SPI bus,
e.g. to quiesce their interrupts, unbinding will fail.

As a rule, devm_spi_register_controller() must not be used if the
->remove() hook performs teardown steps which shall be performed
after unbinding of slaves.

Fix by using the non-devm variant spi_register_controller().  Note that
the struct spi_controller as well as the driver-private data are not
freed until after bcm2835_spi_remove() has finished, so accessing them
is safe.

Fixes: 247263dba208 ("spi: bcm2835: use devm_spi_register_master()")
Signed-off-by: Lukas Wunner 
Cc: stable@vger.kernel.org # v3.13+
Link: https://lore.kernel.org/r/2397dd70cdbe95e0bc4da2b9fca0f31cb94e5aed.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: pxa2xx: Fix runtime PM ref imbalance on probe error

2020-06-17T14:40:29+00:00

commit 65e318e17358a3fd4fcb5a69d89b14016dee2f06 upstream.

The PXA2xx SPI driver releases a runtime PM ref in the probe error path
even though it hasn't acquired a ref earlier.

Apparently commit e2b714afee32 ("spi: pxa2xx: Disable runtime PM if
controller registration fails") sought to copy-paste the invocation of
pm_runtime_disable() from pxa2xx_spi_remove(), but erroneously copied
the call to pm_runtime_put_noidle() as well.  Drop it.

Fixes: e2b714afee32 ("spi: pxa2xx: Disable runtime PM if controller registration fails")
Signed-off-by: Lukas Wunner 
Reviewed-by: Jarkko Nikula 
Reviewed-by: Andy Shevchenko 
Cc: stable@vger.kernel.org # v4.17+
Cc: Jarkko Nikula 
Link: https://lore.kernel.org/r/58b2ac6942ca1f91aaeeafe512144bc5343e1d84.1590408496.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: pxa2xx: Fix controller unregister order

2020-06-17T14:40:29+00:00

commit 32e5b57232c0411e7dea96625c415510430ac079 upstream.

The PXA2xx SPI driver uses devm_spi_register_controller() on bind.
As a consequence, on unbind, __device_release_driver() first invokes
pxa2xx_spi_remove() before unregistering the SPI controller via
devres_release_all().

This order is incorrect:  pxa2xx_spi_remove() disables the chip,
rendering the SPI bus inaccessible even though the SPI controller is
still registered.  When the SPI controller is subsequently unregistered,
it unbinds all its slave devices.  Because their drivers cannot access
the SPI bus, e.g. to quiesce interrupts, the slave devices may be left
in an improper state.

As a rule, devm_spi_register_controller() must not be used if the
->remove() hook performs teardown steps which shall be performed after
unregistering the controller and specifically after unbinding of slaves.

Fix by reverting to the non-devm variant of spi_register_controller().

An alternative approach would be to use device-managed functions for all
steps in pxa2xx_spi_remove(), e.g. by calling devm_add_action_or_reset()
on probe.  However that approach would add more LoC to the driver and
it wouldn't lend itself as well to backporting to stable.

The improper use of devm_spi_register_controller() was introduced in 2013
by commit a807fcd090d6 ("spi: pxa2xx: use devm_spi_register_master()"),
but all earlier versions of the driver going back to 2006 were likewise
broken because they invoked spi_unregister_master() at the end of
pxa2xx_spi_remove(), rather than at the beginning.

Fixes: e0c9905e87ac ("[PATCH] SPI: add PXA2xx SSP SPI Driver")
Signed-off-by: Lukas Wunner 
Reviewed-by: Andy Shevchenko 
Cc: stable@vger.kernel.org # v2.6.17+
Cc: Tsuchiya Yuto 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206403#c1
Link: https://lore.kernel.org/r/834c446b1cf3284d2660f1bee1ebe3e737cd02a9.1590408496.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: Fix controller unregister order

2020-06-17T14:40:29+00:00

commit 84855678add8aba927faf76bc2f130a40f94b6f7 upstream.

When an SPI controller unregisters, it unbinds all its slave devices.
For this, their drivers may need to access the SPI bus, e.g. to quiesce
interrupts.

However since commit ffbbdd21329f ("spi: create a message queueing
infrastructure"), spi_destroy_queue() is executed before unbinding the
slaves.  It sets ctlr->running = false, thereby preventing SPI bus
access and causing unbinding of slave devices to fail.

Fix by unbinding slaves before calling spi_destroy_queue().

Fixes: ffbbdd21329f ("spi: create a message queueing infrastructure")
Signed-off-by: Lukas Wunner 
Cc: stable@vger.kernel.org # v3.4+
Cc: Linus Walleij 
Link: https://lore.kernel.org/r/8aaf9d44c153fe233b17bc2dec4eb679898d7e7b.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: dw: Fix controller unregister order

2020-06-17T14:40:29+00:00

commit ca8b19d61e3fce5d2d7790cde27a0b57bcb3f341 upstream.

The Designware SPI driver uses devm_spi_register_controller() on bind.
As a consequence, on unbind, __device_release_driver() first invokes
dw_spi_remove_host() before unregistering the SPI controller via
devres_release_all().

This order is incorrect:  dw_spi_remove_host() shuts down the chip,
rendering the SPI bus inaccessible even though the SPI controller is
still registered.  When the SPI controller is subsequently unregistered,
it unbinds all its slave devices.  Because their drivers cannot access
the SPI bus, e.g. to quiesce interrupts, the slave devices may be left
in an improper state.

As a rule, devm_spi_register_controller() must not be used if the
->remove() hook performs teardown steps which shall be performed after
unregistering the controller and specifically after unbinding of slaves.

Fix by reverting to the non-devm variant of spi_register_controller().

An alternative approach would be to use device-managed functions for all
steps in dw_spi_remove_host(), e.g. by calling devm_add_action_or_reset()
on probe.  However that approach would add more LoC to the driver and
it wouldn't lend itself as well to backporting to stable.

Fixes: 04f421e7b0b1 ("spi: dw: use managed resources")
Signed-off-by: Lukas Wunner 
Reviewed-by: Andy Shevchenko 
Cc: stable@vger.kernel.org # v3.14+
Cc: Baruch Siach 
Link: https://lore.kernel.org/r/3fff8cb8ae44a9893840d0688be15bb88c090a14.1590408496.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

spi: dw: Fix native CS being unset

2020-06-17T14:40:22+00:00

[ Upstream commit 9aea644ca17b94f82ad7fa767cbc4509642f4420 ]

Commit 6e0a32d6f376 ("spi: dw: Fix default polarity of native
chipselect") attempted to fix the problem when GPIO active-high
chip-select is utilized to communicate with some SPI slave. It fixed
the problem, but broke the normal native CS support. At the same time
the reversion commit ada9e3fcc175 ("spi: dw: Correct handling of native
chipselect") didn't solve the problem either, since it just inverted
the set_cs() polarity perception without taking into account that
CS-high might be applicable. Here is what is done to finally fix the
problem.

DW SPI controller demands any native CS being set in order to proceed
with data transfer. So in order to activate the SPI communications we
must set any bit in the Slave Select DW SPI controller register no
matter whether the platform requests the GPIO- or native CS. Preferably
it should be the bit corresponding to the SPI slave CS number. But
currently the dw_spi_set_cs() method activates the chip-select
only if the second argument is false. Since the second argument of the
set_cs callback is expected to be a boolean with "is-high" semantics
(actual chip-select pin state value), the bit in the DW SPI Slave
Select register will be set only if SPI core requests the driver
to set the CS in the low state. So this will work for active-low
GPIO-based CS case, and won't work for active-high CS setting
the bit when SPI core actually needs to deactivate the CS.

This commit fixes the problem for all described cases. So no matter
whether an SPI slave needs GPIO- or native-based CS with active-high
or low signal the corresponding bit will be set in SER.

Signed-off-by: Serge Semin 
Fixes: ada9e3fcc175 ("spi: dw: Correct handling of native chipselect")
Fixes: 6e0a32d6f376 ("spi: dw: Fix default polarity of native chipselect")
Reviewed-by: Charles Keepax 
Reviewed-by: Andy Shevchenko 
Acked-by: Linus Walleij 

Link: https://lore.kernel.org/r/20200515104758.6934-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: dw: use "smp_mb()" to avoid sending spi data error

2020-06-07T11:18:49+00:00

[ Upstream commit bfda044533b213985bc62bd7ca96f2b984d21b80 ]

Because of out-of-order execution about some CPU architecture,
In this debug stage we find Completing spi interrupt enable ->
prodrucing TXEI interrupt -> running "interrupt_transfer" function
will prior to set "dw->rx and dws->rx_end" data, so this patch add
memory barrier to enable dw->rx and dw->rx_end to be visible and
solve to send SPI data error.
eg:
it will fix to this following low possibility error in testing environment
which using SPI control to connect TPM Modules

kernel: tpm tpm0: Operation Timed out
kernel: tpm tpm0: tpm_relinquish_locality: : error -1

Signed-off-by: fengsheng 
Signed-off-by: Xinwei Kong 
Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin