linux-stable.git/drivers/spi, branch v5.4.282 Linux kernel stable tree spi: spi-fsl-lpspi: Fix scldiv calculation 2024-08-19T03:33:50+00:00 Stefan Wahren wahrenst@gmx.net 2024-08-04T11:36:11+00:00 2c99fd57623c586bffebc4b6cb5ee40eb0641c8c [ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ] The effective SPI clock frequency should never exceed speed_hz otherwise this might result in undefined behavior of the SPI device. Currently the scldiv calculation could violate this constraint. For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz, the function fsl_lpspi_set_bitrate will determine perscale = 0 and scldiv = 1, which is a effective SPI clock of 8 MHz. So fix this by rounding up the quotient of perclk_rate and speed_hz. While this never change within the loop, we can pull this out. Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ]

The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.

Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.

So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.

Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: fsl-lpspi: remove unneeded array 2024-08-19T03:33:50+00:00 Oleksandr Suvorov oleksandr.suvorov@toradex.com 2020-02-20T14:11:48+00:00 3a5e84e6e492afa634f364964bff903ed7b80fde [ Upstream commit 2fa98705a9289c758b6154a22174aa8d4041a285 ] - replace the array with the shift operation - remove the extra comparing operation. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20200220141143.3902922-2-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 730bbfaf7d48 ("spi: spi-fsl-lpspi: Fix scldiv calculation") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2fa98705a9289c758b6154a22174aa8d4041a285 ]

- replace the array with the shift operation
- remove the extra comparing operation.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200220141143.3902922-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 730bbfaf7d48 ("spi: spi-fsl-lpspi: Fix scldiv calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices 2024-07-27T08:38:32+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2024-05-08T09:56:10+00:00 5a2e4cca1456386131cad6514b792f44a24dbeef [ Upstream commit ce1dac560a74220f2e53845ec0723b562288aed4 ] While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective device trees don't add DMA channels. The Reference manuals of i.MX31 and i.MX25 also don't mention the CSPI core being DMA capable. (I didn't check the others.) Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed DMA channel requests") this results in an error message spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel! during boot. However that isn't fatal and the driver gets loaded just fine, just without using DMA. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://patch.msgid.link/20240508095610.2146640-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ce1dac560a74220f2e53845ec0723b562288aed4 ]

While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was
claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective
device trees don't add DMA channels. The Reference manuals of i.MX31 and
i.MX25 also don't mention the CSPI core being DMA capable. (I didn't
check the others.)

Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed
DMA channel requests") this results in an error message

	spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel!

during boot. However that isn't fatal and the driver gets loaded just
fine, just without using DMA.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://patch.msgid.link/20240508095610.2146640-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: stm32: Don't warn about spurious interrupts 2024-06-16T11:28:48+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2024-05-21T10:52:42+00:00 ce05d4a3b0103bf2dfa1797ecf1307ca0c69799b [ Upstream commit 95d7c452a26564ef0c427f2806761b857106d8c4 ] The dev_warn to notify about a spurious interrupt was introduced with the reasoning that these are unexpected. However spurious interrupts tend to trigger continously and the error message on the serial console prevents that the core's detection of spurious interrupts kicks in (which disables the irq) and just floods the console. Fixes: c64e7efe46b7 ("spi: stm32: make spurious and overrun interrupts visible") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://msgid.link/r/20240521105241.62400-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 95d7c452a26564ef0c427f2806761b857106d8c4 ]

The dev_warn to notify about a spurious interrupt was introduced with
the reasoning that these are unexpected. However spurious interrupts
tend to trigger continously and the error message on the serial console
prevents that the core's detection of spurious interrupts kicks in
(which disables the irq) and just floods the console.

Fixes: c64e7efe46b7 ("spi: stm32: make spurious and overrun interrupts visible")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240521105241.62400-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: Don't mark message DMA mapped when no transfer in it is 2024-06-16T11:28:46+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-05-22T17:09:49+00:00 27a6986af2d50216daa9f1aa5f18db3d06fb9876 [ Upstream commit 9f788ba457b45b0ce422943fcec9fa35c4587764 ] There is no need to set the DMA mapped flag of the message if it has no mapped transfers. Moreover, it may give the code a chance to take the wrong paths, i.e. to exercise DMA related APIs on unmapped data. Make __spi_map_msg() to bail earlier on the above mentioned cases. Fixes: 99adef310f68 ("spi: Provide core support for DMA mapping transfers") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://msgid.link/r/20240522171018.3362521-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9f788ba457b45b0ce422943fcec9fa35c4587764 ]

There is no need to set the DMA mapped flag of the message if it has
no mapped transfers. Moreover, it may give the code a chance to take
the wrong paths, i.e. to exercise DMA related APIs on unmapped data.
Make __spi_map_msg() to bail earlier on the above mentioned cases.

Fixes: 99adef310f68 ("spi: Provide core support for DMA mapping transfers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240522171018.3362521-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: spi-mt65xx: Fix NULL pointer access in interrupt handler 2024-03-26T22:22:25+00:00 Fei Shao fshao@chromium.org 2024-03-21T07:08:57+00:00 55f8ea6731aa64871ee6aef7dba53ee9f9f3b2f6 [ Upstream commit a20ad45008a7c82f1184dc6dee280096009ece55 ] The TX buffer in spi_transfer can be a NULL pointer, so the interrupt handler may end up writing to the invalid memory and cause crashes. Add a check to trans->tx_buf before using it. Fixes: 1ce24864bff4 ("spi: mediatek: Only do dma for 4-byte aligned buffers") Signed-off-by: Fei Shao <fshao@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a20ad45008a7c82f1184dc6dee280096009ece55 ]

The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.

Add a check to trans->tx_buf before using it.

Fixes: 1ce24864bff4 ("spi: mediatek: Only do dma for 4-byte aligned buffers")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: mt7621: Fix an error message in mt7621_spi_probe() 2024-03-01T12:13:35+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2022-08-27T11:42:07+00:00 82174d6bd79f3a82d6c9a71dc86ff59dfa20472d [ Upstream commit 2b2bf6b7faa9010fae10dc7de76627a3fdb525b3 ] 'status' is known to be 0 at this point. The expected error code is PTR_ERR(clk). Switch to dev_err_probe() in order to display the expected error code (in a human readable way). This also filters -EPROBE_DEFER cases, should it happen. Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/928f3fb507d53ba0774df27cea0bbba4b055993b.1661599671.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2b2bf6b7faa9010fae10dc7de76627a3fdb525b3 ]

'status' is known to be 0 at this point. The expected error code is
PTR_ERR(clk).

Switch to dev_err_probe() in order to display the expected error code (in a
human readable way).
This also filters -EPROBE_DEFER cases, should it happen.

Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/928f3fb507d53ba0774df27cea0bbba4b055993b.1661599671.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: ppc4xx: Drop write-only variable 2024-02-23T07:25:09+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2024-02-10T16:40:08+00:00 91b48c6339692864ee051a706d4cf3bc0ec9d7bc [ Upstream commit b3aa619a8b4706f35cb62f780c14e68796b37f3f ] Since commit 24778be20f87 ("spi: convert drivers to use bits_per_word_mask") the bits_per_word variable is only written to. The check that was there before isn't needed any more as the spi core ensures that only 8 bit transfers are used, so the variable can go away together with all assignments to it. Fixes: 24778be20f87 ("spi: convert drivers to use bits_per_word_mask") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240210164006.208149-8-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b3aa619a8b4706f35cb62f780c14e68796b37f3f ]

Since commit 24778be20f87 ("spi: convert drivers to use
bits_per_word_mask") the bits_per_word variable is only written to. The
check that was there before isn't needed any more as the spi core
ensures that only 8 bit transfers are used, so the variable can go away
together with all assignments to it.

Fixes: 24778be20f87 ("spi: convert drivers to use bits_per_word_mask")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240210164006.208149-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: bcm-qspi: fix SFDP BFPT read by usig mspi read 2024-02-23T07:24:53+00:00 Kamal Dasu kamal.dasu@broadcom.com 2024-01-09T21:00:32+00:00 b2b0d40775ccceedccec3cfa7420e90995acde69 [ Upstream commit 574bf7bbe83794a902679846770f75a9b7f28176 ] SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op() call. This fixes SFDP parameter page read failures seen with parts that now use SFDP protocol to read the basic flash parameter table. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 574bf7bbe83794a902679846770f75a9b7f28176 ]

SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
call. This fixes SFDP parameter page read failures seen with parts that
now use SFDP protocol to read the basic flash parameter table.

Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
spi: sh-msiof: Enforce fixed DTDL for R-Car H3 2024-01-25T22:34:23+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2023-12-12T08:12:38+00:00 6b84cb9e383d4111e9b56cf6e57d9e1ef9ee488f [ Upstream commit e5c7bcb499840551cfbe85c6df177ebc50432bf0 ] Documentation says only DTDL of 200 is allowed for this SoC. Fixes: 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://msgid.link/r/20231212081239.14254-1-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e5c7bcb499840551cfbe85c6df177ebc50432bf0 ]

Documentation says only DTDL of 200 is allowed for this SoC.

Fixes: 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://msgid.link/r/20231212081239.14254-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>