linux-stable.git/drivers/spi, branch linux-4.1.y

spi: dw: Disable clock after unregistering the host

2018-05-23T01:33:49+00:00

[ Upstream commit 400c18e3dc86e04ef5afec9b86a8586ca629b9e9 ]

The dw_mmio driver disables the block clock before unregistering
the host. The code unregistering the host may access the SPI block
registers. If register access happens with block clock disabled,
this may lead to a bus hang. Disable the clock after unregistering
the host to prevent such situation.

This bug was observed on Altera Cyclone V SoC.

Signed-off-by: Marek Vasut 
Cc: Andy Shevchenko 
Cc: Mark Brown 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: sun6i: disable/unprepare clocks on remove

2018-05-23T01:33:46+00:00

[ Upstream commit 2d9bbd02c54094ceffa555143b0d68cd06504d63 ]

sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable
clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to
disable/unprepare them if we're not suspended.
Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure
that sun6i_spi_runtime_suspend() is called if needed.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Tobias Jordan 
Acked-by: Maxime Ripard 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer

2018-05-23T01:33:44+00:00

[ Upstream commit 812613591cb652344186c4cd912304ed02138566 ]

When running the spi-loopback-test with slower clock rate like 10 KHz,
the test for 251 bytes transfer was failed.  This failure triggered an
spi-omap2-mcspi's error message "DMA RX last word empty".

This message means that PIO for reading the remaining bytes due to the
DMA transfer length reduction is failed.  This problem can be fixed by
polling OMAP2_MCSPI_CHSTAT_RXS bit in channel status register to wait
until the receive buffer register is filled.

Cc: Mark Brown 
Signed-off-by: Akinobu Mita 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: atmel: fixed spin_lock usage inside atmel_spi_remove

2018-03-21T03:49:44+00:00

[ Upstream commit 66e900a3d225575c8b48b59ae1fe74bb6e5a65cc ]

The only part of atmel_spi_remove which needs to be atomic is hardware
reset.

atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts
enabled.
atmel_spi_release_dma calls dma_release_channel and dma_release_channel
locks a mutex inside of spin_lock.

So the call of these functions can't be inside a spin_lock.

Reported-by: Jia-Ju Bai 
Signed-off-by: Radu Pirea 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: sun4i: disable clocks in the remove function

2018-03-04T15:28:27+00:00

[ Upstream commit c810daba0ab5226084a56893a789af427a801146 ]

mclk and hclk need to be disabled. Since pm_runtime_disable does
not disable the clocks, use pm_runtime_force_suspend instead.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi 
Acked-by: Maxime Ripard 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: imx: do not access registers while clocks disabled

2018-03-01T03:09:47+00:00

[ Upstream commit d593574aff0ab846136190b1729c151c736727ec ]

Since clocks are disabled except during message transfer clocks
are also disabled when spi_imx_remove gets called. Accessing
registers leads to a freeeze at least on a i.MX 6ULL. Enable
clocks before disabling accessing the MXC_CSPICTRL register.

Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message")
Signed-off-by: Stefan Agner 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin

spi: sh-msiof: Fix DMA transfer size check

2018-01-17T17:55:17+00:00

[ Upstream commit 36735783fdb599c94b9c86824583df367c65900b ]

DMA supports 32-bit words only,
even if BITLEN1 of SITMDR2 register is 16bit.

Fixes: b0d0ce8b6b91 ("spi: sh-msiof: Add DMA support")
Signed-off-by: Hiromitsu Yamasaki 
Signed-off-by: Simon Horman 
Acked-by: Geert Uytterhoeven 
Acked-by: Dirk Behme 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: dw: Make debugfs name unique between instances

2017-09-10T20:35:55+00:00

[ Upstream commit 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f ]

Some system have multiple dw devices. Currently the driver uses a
fixed name for the debugfs dir. Append dev name to the debugfs dir
name to make it unique.

Signed-off-by: Phil Reid 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: davinci: use dma_mapping_error()

2017-07-31T17:37:51+00:00

[ Upstream commit c5a2a394835f473ae23931eda5066d3771d7b2f8 ]

The correct error checking for dma_map_single() is to use
dma_mapping_error().

Signed-off-by: Kevin Hilman 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

spi: pxa2xx: Clear all RFT bits in reset_sccr1() on Intel Quark

2016-08-17T16:58:31+00:00

[ Upstream commit 152bc19e2fc2b7fce7ffbc2a9cea94b147223702 ]

It seems the commit e5262d0568dc ("spi: spi-pxa2xx: SPI support for Intel Quark
X1000") misses one place to be adapted for Intel Quark, i.e. in reset_sccr1().

Clear all RFT bits when call reset_sccr1() on Intel Quark.

Fixes: e5262d0568dc ("spi: spi-pxa2xx: SPI support for Intel Quark X1000")
Signed-off-by: Andy Shevchenko 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin