linux-stable.git/drivers/soundwire, branch v6.10

soundwire: fix usages of device_get_named_child_node()

2024-06-03T12:05:24+00:00

The documentation for device_get_named_child_node() mentions this
important point:

"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"

Add fwnode_handle_put() to avoid leaked references.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240429004935.2400191-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

Merge tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

2024-05-21T18:23:36+00:00

Pull soundwire updates from Vinod Koul:

 - cleanup and conversion for soundwire sysfs groups

 - intel support for ace2x bits, auxdevice pm improvements

 - qcom multi link device support

* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
  soundwire: intel_ace2.x: add support for DOAISE property
  soundwire: intel_ace2.x: add support for DODSE property
  soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
  soundwire: intel_ace2x: cleanup DOAIS/DODS settings
  soundwire: intel_ace2x: simplify check_wake()
  soundwire: intel_ace2x: fix wakeup handling
  soundwire: intel_init: resume all devices on exit.
  soundwire: intel: export intel_resume_child_device
  soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
  ASoC: SOF: Intel: hda: disable SoundWire interrupt later
  soundwire: qcom: allow multi-link on newer devices
  soundwire: intel_ace2x: use legacy formula for intel_alh_id
  soundwire: reconcile dp0_prop and dpn_prop
  soundwire: intel_ace2x: set the clock source
  soundwire: intel_ace2.x: power-up first before setting SYNCPRD
  soundwire: intel_ace2x: move and extend clock selection
  soundwire: intel: add support for MeteorLake additional clocks
  soundwire: intel: add more values for SYNCPRD
  soundwire: bus: extend base clock checks to 96 MHz
  soundwire: cadence: show the bus frequency and frame shape
  ...

soundwire: intel_ace2.x: add support for DOAISE property

2024-05-04T12:56:50+00:00

Extend previous patches with the DOAISE field and property.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240429004321.2399754-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_ace2.x: add support for DODSE property

2024-05-04T12:56:50+00:00

Extend previous patches with the DODSE field and property.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240429004321.2399754-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_ace2x: use DOAIS and DODS settings from firmware

2024-05-04T12:56:50+00:00

Starting with LNL, the recommendation is to use settings read from DSD
properties instead of hard-coding the values.

The DOAIS and DODS values are completely-specific to Intel and are
stored in a vendor-specific property structure.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240429004321.2399754-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_ace2x: cleanup DOAIS/DODS settings

2024-05-04T12:56:49+00:00

Use two variables to save the settings, in preparation of a follow-up
change to read values from _DSD properties.

Starting with this patch, the bitfields will be reordered and listed
MSB-first, as shown in the hardware documentation.

Also note that the default for DOAIS is changed from 0x1 (copy-pasted
value?) to 0x3 (hardware default).

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240429004321.2399754-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_ace2x: simplify check_wake()

2024-04-26T14:22:11+00:00

Since LunarLake, we use the HDadio WAKEEN/WAKESTS to detect wakes for
SoundWire codecs. This patch follows the HDaudio example and
simplifies the behavior on wake-up by unconditionally waking up all
links.

This behavior makes a lot of sense when removing the jack, which may
signal that the user wants to start rendering audio using the local
amplifiers. Resuming all links helps make sure the amplifiers are
ready to be used. Worst case, the pm_runtime suspend would kick-in
after several seconds of inactivity.

Closes: https://github.com/thesofproject/linux/issues/4687
Co-developed-by: Bard Liao 
Signed-off-by: Bard Liao 
Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Keqiao Zhang 
Link: https://lore.kernel.org/r/20240426064030.2305343-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_ace2x: fix wakeup handling

2024-04-26T14:22:11+00:00

The initial programming sequence only worked in the case where the
OFLEN bit is set, i.e. the DSP handles the SoundWire interface. In the
Linux integration, the interface is owned by the host. This disconnect
leads to wake-ups being routed to the DSP and not to the host.

The suggested update is to rely on the global HDAudio WAKEEN/STATESTS
registers, with the SDI bits used to program the wakeups and check the
status.

Note that there is no way to know which peripheral generated a
wake-up. When the hardware detects a change, it sets all the bits
corresponding to LSDIIDx. The LSDIIDx information can be used to
figure out on which link the wakeup happened, but for further details
the software will have to check the status of each peripheral.

Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Rander Wang 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240426064030.2305343-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_init: resume all devices on exit.

2024-04-11T17:22:51+00:00

When the manager becomes pm_runtime active in the remove procedure,
peripherals will become attached, and do the initialization
process. We have to wait until all the devices are fully resumed
before the cleanup, otherwise there is a possible race condition where
asynchronous workqueues initiate transfers on the bus that cannot
complete. This will ensure there are no SoundWire registers accessed
after the bus is powered-down.

Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240410023438.487017-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel: export intel_resume_child_device

2024-04-11T17:22:51+00:00

We will resume each child in the next patch, and
intel_resume_child_device() will be used.

Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20240410023438.487017-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul