linux-stable.git/drivers/soundwire, branch v5.7

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-04-03T20:22:40+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...

Merge branch 'topic/ro_wordlength' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.7

2020-03-20T15:33:01+00:00

soundwire: qcom: add support for get_sdw_stream()

2020-03-20T14:05:40+00:00

Adding support to new get_sdw_stream() that can help machine
driver to deal with soundwire stream.

Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20200317092645.5705-1-srinivas.kandagatla@linaro.org
[fix checkpatch error for "void * qcom_swrm_get_sdw_stream"]
Signed-off-by: Vinod Koul

Merge branch 'topic/ro_wordlength' into next

2020-03-20T13:55:14+00:00

soundwire: stream: Add read_only_wordlength flag to port properties

2020-03-20T13:54:59+00:00

According to SoundWire Specification Version 1.2.
"A Data Port number X (in the range 0-14) which supports only one
value of WordLength may implement the WordLength field in the
DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of
WordLength in response to reads."

As WSA881x interfaces in PDM mode making the only field "WordLength"
in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this
register on WSA881x soundwire slave with Qualcomm Soundwire Controller
is throwing up an error. Not sure how other controllers deal with
writing to readonly registers, but this patch provides a way to avoid
writes to DPN_BlockCtrl1 register by providing a read_only_wordlength
flag in struct sdw_dpn_prop

Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul

soundwire: cadence: clear FIFO to avoid pop noise issue on playback start

2020-03-19T07:13:05+00:00

Driver should clear FIFO in PDI, or the previously stored sample data
in FIFO will generate pop noise when stream is started. The soft reset
bit will clear all the FIFO to zero and is self-cleared after that.

Signed-off-by: randerwang 
Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200317163329.25501-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: cadence: multi-link support

2020-03-19T07:13:05+00:00

Enable multi-link (aka multi-master configuration). In this
configuration, updates and commands with the 'ssp_sync' tag will be
deferred and controlled by the gsync hardware signal.

Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200317163329.25501-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: cadence: commit changes in the exit_reset() sequence

2020-03-19T07:13:04+00:00

Follow recommended flows, the BUS_RESET must be programmed before the
UPDATE_CONFIG.

Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200317163329.25501-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: cadence: remove automatic command retries

2020-03-19T07:13:04+00:00

This is a good idea on paper, but it's not recommended at all when
operating in multi-master mode. It's also not recommended when doing
bank switches, since the retransmission would happen at the next SSP,
and the command protocol is stuck in the mean time.

Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200317163329.25501-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: cadence: remove PREQ_DELAY assignment

2020-03-19T07:13:04+00:00

The hardware default is 0x1F, and the existing code does an OR with 0xF.
This is a no-op, remove.

Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200317163329.25501-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul