Add kfree() in the later error handling in order to avoid memory leak.

Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230707021625.7727-1-jiasheng@iscas.ac.cn
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810123104.231167-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The existing use of match_string() caused it to reject 'echo foo' due
to the implicitly appended newline, which was somewhat ergonomically
awkward and inconsistent with typical sysfs behavior.  Using the
__sysfs_* variant instead provides more convenient and consistent
linefeed-agnostic behavior.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: c6807970c3bc ("soc: aspeed: Add UART routing support")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230628083735.19946-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810122941.231085-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The blk-ctrl device is deliberately placed outside of the GPC power
domain as it needs to control the power sequencing of the blk-ctrl
domains together with the GPC domains.

Clock runtime PM works by operating on the clock parent device, which
doesn't translate into the neccessary GPC power domain action if the
clk parent is not part of the GPC power domain. Use the bus_power_device
as the parent for the clock to trigger the proper GPC domain actions on
clock runtime power management.

Fixes: 2cbee26e5d59 ("soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock")
Reported-by: Yannic Moog <Y.Moog@phytec.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.

  Included in here are:

   - Lots of USB4/Thunderbolt additions and updates for new hardware
     types and fixes as people are starting to get access to the
     hardware in the wild

   - new gadget controller driver, cdns2, added

   - new typec drivers added

   - xhci driver updates

   - typec driver updates

   - usbip driver fixes

   - usb-serial driver updates and fixes

   - lots of smaller USB driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
  usb: host: xhci: Do not re-initialize the XHCI HC if being removed
  usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
  usbip: usbip_host: Replace strlcpy with strscpy
  usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  USB: serial: option: add LARA-R6 01B PIDs
  usb: ulpi: Make container_of() no-op in to_ulpi_dev()
  usb: gadget: legacy: fix error return code in gfs_bind
  usb: typec: fsa4480: add support for Audio Accessory Mode
  usb: typec: fsa4480: rework mux & switch setup to handle more states
  usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  USB: gadget: f_hid: make hidg_class a static const structure
  USB: gadget: f_printer: make usb_gadget_class a static const structure
  USB: mon: make mon_bin_class a static const structure
  USB: gadget: udc: core: make udc_class a static const structure
  USB: roles: make role_class a static const structure
  dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
  dt-bindings: usb: Add StarFive JH7110 USB controller
  dt-bindings: usb: dwc3: Add IPQ9574 compatible
  usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
  ...

Pull pin control updates from Linus Walleij:
 "No core changes this time

  New drivers:

   - Tegra234 support

   - Qualcomm IPQ5018 support

   - Intel Meteor Lake-S support

   - Qualcomm SDX75 subdriver

   - Qualcomm SPMI-based PM8953 support

  Improvements:

   - Fix up support for GPIO3 on the AXP209

   - Push-pull drive configuration support for the AT91 PIO4

   - Fix misc non-urgent bugs in the AMD driver

   - Misc non-urgent improved error handling

   - Misc janitorial and minor improvements"

* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: cherryview: Drop goto label
  pinctrl: baytrail: invert if condition
  pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
  pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
  pinctrl: tegra: avoid duplicate field initializers
  dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
  pinctrl: mlxbf3: remove broken Kconfig 'select'
  pinctrl: spear: Remove unused of_gpio.h inclusion
  pinctrl: lantiq: Remove unused of_gpio.h inclusion
  pinctrl: at91-pio4: check return value of devm_kasprintf()
  pinctrl: microchip-sgpio: check return value of devm_kasprintf()
  pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
  pinctrl: intel: refine ->irq_set_type() hook
  pinctrl: intel: refine ->set_mux() hook
  pinctrl: baytrail: Use str_hi_lo() helper
  lib/string_choices: Add str_high_low() helper
  lib/string_helpers: Split out string_choices.h
  lib/string_helpers: Add missing header files to MAINTAINERS database
  pinctrl: npcm7xx: Add missing check for ioremap
  pinctrl:sunplus: Add check for kmalloc
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Nothing surprising in the SoC specific drivers, with the usual
  updates:

   - Added or improved SoC driver support for Tegra234, Exynos4121,
     RK3588, as well as multiple Mediatek and Qualcomm chips

   - SCMI firmware gains support for multiple SMC/HVC transport and
     version 3.2 of the protocol

   - Cleanups amd minor changes for the reset controller, memory
     controller, firmware and sram drivers

   - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
     amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
  dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
  MAINTAINERS: add PHY-related files to Amlogic SoC file list
  drivers: meson: secure-pwrc: always enable DMA domain
  tee: optee: Use kmemdup() to replace kmalloc + memcpy
  soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
  dt-bindings: sram: qcom,imem: document qdu1000
  soc: qcom: icc-bwmon: Fix MSM8998 count unit
  dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  soc: qcom: socinfo: Add support for new fields in revision 19
  soc: qcom: socinfo: Add support for new fields in revision 18
  dt-bindings: firmware: scm: Add compatible for SDX75
  soc: qcom: mdt_loader: Fix split image detection
  dt-bindings: memory-controllers: drop unneeded quotes
  soc: rockchip: dtpm: use C99 array init syntax
  firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
  soc/tegra: pmc: Use devm_clk_notifier_register()
  soc/tegra: pmc: Simplify debugfs initialization
  ...

NXP/FSL SoC driver updates for v6.5

- fsl-mc: Make remove function return void
- QE USB: fix build issue caused by missing dependency

* tag 'soc-fsl-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  bus: fsl-mc: fsl-mc-allocator: Drop a write-only variable
  bus: fsl-mc: fsl-mc-allocator: Initialize mc_bus_dev before use
  soc/fsl/qe: fix usb.c build errors
  bus: fsl-mc: Make remove function return void
  soc: fsl: dpio: Suppress duplicated error reporting on device remove
  bus: fsl-mc: fsl-mc-allocator: Improve error reporting
  bus: fsl-mc: fsl-mc-allocator: Drop if block with always wrong condition
  bus: fsl-mc: dprc: Push down error message from fsl_mc_driver_remove()
  bus: fsl-mc: Only warn once about errors on device unbind

Link: https://lore.kernel.org/r/20230621222503.12402-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.

The details of PMIC can be found here[1].

Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.

An addition to the rk3588 power-domains, some new syscon compatibles for
rk3588-based "General-register-files" register areas and a move to
C99 array inits for the dtpm driver to fix sparse warnings.

* tag 'v6.5-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: dtpm: use C99 array init syntax
  dt-bindings: soc: rockchip: add rk3588 pipe-phy syscon
  dt-bindings: soc: rockchip: add rk3588 usb2phy syscon
  soc: rockchip: power-domain: add rk3588 mem module support

Link: https://lore.kernel.org/r/10286366.nUPlyArG6x@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Amlogic Drivers changes for v6.5:
- tag some powers domains as always-on for secure-pwrc
- fix MAINTAINERS entry for PHY drivers & bindings
- Amlogic Meson GPIO interrupt controller binding to yaml conversion

* tag 'amlogic-drivers-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
  MAINTAINERS: add PHY-related files to Amlogic SoC file list
  drivers: meson: secure-pwrc: always enable DMA domain

Link: https://lore.kernel.org/r/a10ea420-7599-3f41-dfd8-1742ef436ca0@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>