linux-stable.git/drivers/soc, branch v6.1.76 Linux kernel stable tree soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration 2024-01-25T23:27:28+00:00 Atul Dhudase quic_adhudase@quicinc.com 2023-12-06T15:32:51+00:00 bf5e9d28a8e7404cd9ef93ed430e87a52e21c8ca [ Upstream commit eed6e57e9f3e2beac37563eb6a0129549daa330e ] Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write to llcc") add the support for chipset where capacity based allocation and retention through power collapse can be programmed based on content of SCT table mentioned in the llcc driver where the target like sdm845 where the entire programming related to it is controlled in firmware. However, the commit introduces a bug where capacity/retention register get overwritten each time it gets programmed for each slice and that results in misconfiguration of the register based on SCT table and that is not expected behaviour instead it should be read modify write to retain the configuration of other slices. This issue is totally caught from code review and programming test and not through any power/perf numbers so, it is not known what impact this could make if we don't have this change however, this feature are for these targets and they should have been programmed accordingly as per their configuration mentioned in SCT table like others bits information. This change brings one difference where it keeps capacity/retention bits of the slices that are not mentioned in SCT table in unknown state where as earlier it was initialized to zero. Fixes: c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write to llcc") Signed-off-by: Atul Dhudase <quic_adhudase@quicinc.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eed6e57e9f3e2beac37563eb6a0129549daa330e ]

Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can
 write to llcc") add the support for chipset where capacity based
allocation and retention through power collapse can be programmed
based on content of SCT table mentioned in the llcc driver where
the target like sdm845 where the entire programming related to it
is controlled in firmware. However, the commit introduces a bug
where capacity/retention register get overwritten each time it
gets programmed for each slice and that results in misconfiguration
of the register based on SCT table and that is not expected
behaviour instead it should be read modify write to retain the
configuration of other slices.

This issue is totally caught from code review and programming test
and not through any power/perf numbers so, it is not known what
impact this could make if we don't have this change however,
this feature are for these targets and they should have been
programmed accordingly as per their configuration mentioned in
SCT table like others bits information.

This change brings one difference where it keeps capacity/retention
bits of the slices that are not mentioned in SCT table in unknown
state where as earlier it was initialized to zero.

Fixes: c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write to llcc")
Signed-off-by: Atul Dhudase <quic_adhudase@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pmdomain: imx: Make imx pgc power domain also set the fwnode 2023-11-28T17:07:16+00:00 Pengfei Li pengfei.li_1@nxp.com 2023-10-20T18:59:49+00:00 c2d14682b36d3e77f278fbccde8f2b8007dcf24e [ Upstream commit 374de39d38f97b0e58cfee88da590b2d056ccf7f ] Currently, The imx pgc power domain doesn't set the fwnode pointer, which results in supply regulator device can't get consumer imx pgc power domain device from fwnode when creating a link. This causes the driver core to instead try to create a link between the parent gpc device of imx pgc power domain device and supply regulator device. However, at this point, the gpc device has already been bound, and the link creation will fail. So adding the fwnode pointer to the imx pgc power domain device will fix this issue. Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com> Tested-by: Emil Kronborg <emil.kronborg@protonmail.com> Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 374de39d38f97b0e58cfee88da590b2d056ccf7f ]

Currently, The imx pgc power domain doesn't set the fwnode
pointer, which results in supply regulator device can't get
consumer imx pgc power domain device from fwnode when creating
a link.

This causes the driver core to instead try to create a link
between the parent gpc device of imx pgc power domain device and
supply regulator device. However, at this point, the gpc device
has already been bound, and the link creation will fail. So adding
the fwnode pointer to the imx pgc power domain device will fix
this issue.

Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Tested-by: Emil Kronborg <emil.kronborg@protonmail.com>
Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable 2023-11-28T17:07:16+00:00 Maíra Canal mcanal@igalia.com 2023-10-24T10:10:40+00:00 8bd370cc3cd6b2b4e0d9b6bed7e9d6cf68517189 [ Upstream commit 2e75396f1df61e1f1d26d0d703fc7292c4ae4371 ] The commit c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control") refactored the ASB control by using a general function to handle both the enable and disable. But this patch introduced a subtle regression: we need to check if !!(readl(base + reg) & ASB_ACK) == enable, not just check if (readl(base + reg) & ASB_ACK) == true. Currently, this is causing an invalid register state in V3D when unloading and loading the driver, because `bcm2835_asb_disable()` will return -ETIMEDOUT and `bcm2835_asb_power_off()` will fail to disable the ASB slave for V3D. Fixes: c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231024101251.6357-2-mcanal@igalia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2e75396f1df61e1f1d26d0d703fc7292c4ae4371 ]

The commit c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
refactored the ASB control by using a general function to handle both
the enable and disable. But this patch introduced a subtle regression:
we need to check if !!(readl(base + reg) & ASB_ACK) == enable, not just
check if (readl(base + reg) & ASB_ACK) == true.

Currently, this is causing an invalid register state in V3D when
unloading and loading the driver, because `bcm2835_asb_disable()` will
return -ETIMEDOUT and `bcm2835_asb_power_off()` will fail to disable the
ASB slave for V3D.

Fixes: c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024101251.6357-2-mcanal@igalia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc: qcom: llcc: Handle a second device without data corruption 2023-11-20T10:52:02+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-09-26T08:32:29+00:00 f0ef883cae309bc5e8cdfcdbc1b4822732ce20a8 [ Upstream commit f1a1bc8775b26345aba2be278118999e7f661d3d ] Usually there is only one llcc device. But if there were a second, even a failed probe call would modify the global drv_data pointer. So check if drv_data is valid before overwriting it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Link: https://lore.kernel.org/r/20230926083229.2073890-1-u.kleine-koenig@pengutronix.de Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f1a1bc8775b26345aba2be278118999e7f661d3d ]

Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver")
Link: https://lore.kernel.org/r/20230926083229.2073890-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers 2023-10-06T12:56:49+00:00 Nathan Rossi nathan.rossi@digi.com 2023-08-14T01:57:00+00:00 328efccc7847b55b0083a5b5a81e28a4f79b6fa0 [ Upstream commit 9d1e8275a28f51599d754ce661c91e0a689c0234 ] Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") added configuration to enable the OCOTP clock before attempting to read from the associated registers. This same kexec issue is present with the imx8m SoCs that use the imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid function to configure the OCOTP clock before accessing the associated registers. This change implements the same clock enable functionality that is present in the imx8mq_soc_revision function for the imx8mm_soc_uid function. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9d1e8275a28f51599d754ce661c91e0a689c0234 ]

Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.

This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc: qcom: qmi_encdec: Restrict string length in decode 2023-09-19T10:27:57+00:00 Chris Lew quic_clew@quicinc.com 2023-08-01T06:47:12+00:00 f6250ecb7fbb934b89539e7e2ba6c1d8555c0975 commit 8d207400fd6b79c92aeb2f33bb79f62dff904ea2 upstream. The QMI TLV value for strings in a lot of qmi element info structures account for null terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of bounds access when the NULL character is appended in decoding. Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder") Cc: stable@vger.kernel.org Signed-off-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> Link: https://lore.kernel.org/r/20230801064712.3590128-1-quic_ipkumar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8d207400fd6b79c92aeb2f33bb79f62dff904ea2 upstream.

The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding.

Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230801064712.3590128-1-quic_ipkumar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
soc: qcom: smem: Fix incompatible types in comparison 2023-09-13T07:42:42+00:00 Chen Jiahao chenjiahao16@huawei.com 2023-08-01T09:48:07+00:00 0cd481c27b0337b67e87ac46a408eb438db86edc [ Upstream commit 5f908786cf44fcb397cfe0f322ef2f41b0909e2a ] This patch fixes the following sparse error: drivers/soc/qcom/smem.c:738:30: error: incompatible types in comparison expression (different add ress spaces): drivers/soc/qcom/smem.c:738:30: void * drivers/soc/qcom/smem.c:738:30: void [noderef] __iomem * In addr_in_range(), "base" is of type void __iomem *, converting void *addr to the same type to fix above sparse error. Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST") Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com> Link: https://lore.kernel.org/r/20230801094807.4146779-1-chenjiahao16@huawei.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5f908786cf44fcb397cfe0f322ef2f41b0909e2a ]

This patch fixes the following sparse error:

drivers/soc/qcom/smem.c:738:30: error: incompatible types in comparison expression (different add        ress spaces):
drivers/soc/qcom/smem.c:738:30:    void *
drivers/soc/qcom/smem.c:738:30:    void [noderef] __iomem *

In addr_in_range(), "base" is of type void __iomem *, converting
void *addr to the same type to fix above sparse error.

Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230801094807.4146779-1-chenjiahao16@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros 2023-09-13T07:42:36+00:00 Luca Weiss luca@z3ntu.xyz 2023-06-14T16:35:47+00:00 ba7ff6085b80c03ae872057bce173d2426917dd1 [ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ] Since we're using these two macros to read a value from a register, we need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise we're getting wrong values. So instead of: [ 3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved we now get the correct value of: [ 3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-1-79da95a2581f@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ]

Since we're using these two macros to read a value from a register, we
need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise
we're getting wrong values.

So instead of:

  [    3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved

we now get the correct value of:

  [    3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved

Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-1-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc: qcom: ocmem: Add OCMEM hardware version print 2023-09-13T07:42:36+00:00 Luca Weiss luca@z3ntu.xyz 2023-05-29T08:41:15+00:00 fb4a774a662790cb39db19ece6f6c6fe94b969e9 [ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ] It might be useful to know what hardware version of the OCMEM block the SoC contains. Add a debug print for that. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230509-ocmem-hwver-v3-1-e51f3488e0f4@z3ntu.xyz Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ]

It might be useful to know what hardware version of the OCMEM block the
SoC contains. Add a debug print for that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-ocmem-hwver-v3-1-e51f3488e0f4@z3ntu.xyz
Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros")
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc: aspeed: socinfo: Add kfree for kstrdup 2023-08-23T15:52:38+00:00 Jiasheng Jiang jiasheng@iscas.ac.cn 2023-08-10T12:31:04+00:00 b662856b71343d9e731c1cd4bbe54758c7791abb [ Upstream commit 6e6d847a8ce18ab2fbec4f579f682486a82d2c6b ] Add kfree() in the later error handling in order to avoid memory leak. Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20230707021625.7727-1-jiasheng@iscas.ac.cn Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230810123104.231167-1-joel@jms.id.au Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6e6d847a8ce18ab2fbec4f579f682486a82d2c6b ]

Add kfree() in the later error handling in order to avoid memory leak.

Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230707021625.7727-1-jiasheng@iscas.ac.cn
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810123104.231167-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>