[ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ] Currently we wait only until the PGC inverts the isolation setting before disabling the peripheral clocks. This doesn't ensure that the reset is properly propagated through the peripheral devices in the power domain. Wait until the PGC signals that the power up request is done and wait a bit for resets to propagate before disabling the clocks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ce35e21d82bcac8b3fd5128888f9e233f8444293 upstream.
Mediatek CMDQ driver have a mechanism to do TXDONE_BY_ACK,
so we should set knows_txdone.
Fixes:576f1b4bc802 ("soc: mediatek: Add Mediatek CMDQ helper")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the probe return value to -ENODEV on non-Exynos platforms.
Link: https://lore.kernel.org/r/20200316175652.5604-4-krzk@kernel.org
Fixes: 02fb29882d5c ("soc: samsung: chipid: Drop "syscon" compatible requirement")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
NXP/FSL soc driver fixes for v5.6 DPAA2 DPIO - Fix a kernel hang caused by irq requested before creating dpio * tag 'soc-fsl-fix-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: register dpio irq handlers after dpio create Link: https://lore.kernel.org/r/20200312202525.16708-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dpio irqs must be registered when you can actually receive interrupts, ie when the dpios are created. Kernel goes through NULL pointer dereference errors followed by kernel panic [1] because the dpio irqs are enabled before the dpio is created. [1] Unable to handle kernel NULL pointer dereference at virtual address 0040 fsl_mc_dpio dpio.14: probed fsl_mc_dpio dpio.13: Adding to iommu group 11 ISV = 0, ISS = 0x00000004 Unable to handle kernel NULL pointer dereference at virtual address 0040 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 151 Comm: kworker/2:1 Not tainted 5.6.0-rc4-next-20200304 #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Workqueue: events deferred_probe_work_func pstate: 00000085 (nzcv daIf -PAN -UAO) pc : dpaa2_io_irq+0x18/0xe0 lr : dpio_irq_handler+0x1c/0x28 sp : ffff800010013e20 x29: ffff800010013e20 x28: ffff0026d9b4c140 x27: ffffa1d38a142018 x26: ffff0026d2953400 x25: ffffa1d38a142018 x24: ffffa1d38a7ba1d8 x23: ffff800010013f24 x22: 0000000000000000 x21: 0000000000000072 x20: ffff0026d2953400 x19: ffff0026d2a68b80 x18: 0000000000000001 x17: 000000002fb37f3d x16: 0000000035eafadd x15: ffff0026d9b4c5b8 x14: ffffffffffffffff x13: ff00000000000000 x12: 0000000000000038 x11: 0101010101010101 x10: 0000000000000040 x9 : ffffa1d388db11e4 x8 : ffffa1d38a7e40f0 x7 : ffff0026da414f38 x6 : 0000000000000000 x5 : ffff0026da414d80 x4 : ffff5e5353d0c000 x3 : ffff800010013f60 x2 : ffffa1d388db11c8 x1 : ffff0026d2a67c00 x0 : 0000000000000000 Call trace: dpaa2_io_irq+0x18/0xe0 dpio_irq_handler+0x1c/0x28 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x38/0x90 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x2c/0x40 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x64/0x150 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x48 irq_set_affinity_hint+0x6c/0xa0 dpaa2_dpio_probe+0x2a4/0x518 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 device_add+0x41c/0x758 fsl_mc_device_add+0x184/0x530 dprc_scan_objects+0x280/0x370 dprc_probe+0x124/0x3b0 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 deferred_probe_work_func+0x74/0xa8 process_one_work+0x1c8/0x470 worker_thread+0x1f8/0x428 kthread+0x124/0x128 ret_from_fork+0x10/0x18 Code: a9bc7bfd 910003fd a9025bf5 a90363f7 (f9402015) ---[ end trace 38298e1a29e7a570 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Mem abort info: ESR = 0x96000004 CM = 0, WnR = 0 EC = 0x25: DABT (current EL), IL = 32 bits [0000000000000040] user address but active_mm is swapper SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper SMP: failed to stop secondary CPUs 0-2 Kernel Offset: 0x21d378600000 from 0xffff800010000000 PHYS_OFFSET: 0xffffe92180000000 CPU features: 0x10002,21806008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Grigore Popescu <grigore.popescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
i.MX fixes for 5.6: - Build v7_cpu_resume() unconditionally to fix system hang in case that suspend is disabled but cpuidle support is enabled. - Drop unexisting Ethernet PHY device from imx8qxp-mek board. - Fix SRAM compatible strings on imx6dl-colibri-eval-v3 board. - Fix imx-scu driver to make sure that all messages words are written sequentially. - A series from Leonard Crestez to fix i.MX SC API users, having all messages aligned on 4 bytes. - Fix eMMC supply for phycore-som board. - Drop bogus frequency setting from imx7-colibri SD/MMC device, so that HS200 mode starts working and delivers better performance. - Fix opp-supported-hw for i.MX7D to get consumer and industrial parts work with correct frequency settings. - Restore MDIO compatible to the correct one for LS1021A SoC. * tag 'imx-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties ARM: dts: ls1021a: Restore MDIO compatible to gianfar ARM: dts: imx7d: fix opp-supported-hw ARM: imx: build v7_cpu_resume() unconditionally ARM: dts: imx6: phycore-som: fix emmc supply Link: https://lore.kernel.org/r/20200224120334.GH27688@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: 73feb4d0f8f1 ("soc: imx-scu: Add SoC UID(unique identifier) support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If only Tegra194 support is enabled, the tegra30_fuse_read() and tegra30_fuse_init() function are not declared and cause a build failure. Add Tegra194 to the preprocessor guard to make sure these functions are available for Tegra194-only builds as well. Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
Pull ARM SoC platform updates from Olof Johansson: "Most of these are smaller fixes that have accrued, and some continued cleanup of OMAP platforms towards shared frameworks. One new SoC from Atmel/Microchip: sam9x60" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: OMAP2+: Fix undefined reference to omap_secure_init ARM: s3c64xx: Drop unneeded select of TIMER_OF ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0 ARM: s3c24xx: Switch to atomic pwm API in rx1950 ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init() ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization ARM: at91: Documentation: add sam9x60 product and datasheet ARM: at91: pm: use of_device_id array to find the proper shdwc node ARM: at91: pm: use SAM9X60 PMC's compatible ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume ARM: tegra: Modify reshift divider during LP1 ARM: tegra: Enable PLLP bypass during Tegra124 LP1 ARM: samsung: Rename Samsung and Exynos to lowercase ARM: exynos: Correct the help text for platform Kconfig option ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB ARM: brcmstb: Add debug UART entry for 7216 ...