[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ]

Trying to read out Chip ID before APBMISC registers are mapped won't
succeed, in a result Tegra124 gets a wrong address for the HW straps
register if machine uses an old outdated device tree.

Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 5d0d4d42bed0090d3139e7c5ca1587d76d48add6 upstream.

The 'active_only' attribute was accidentally never set to true for any
power domains meaning that all the code handling this attribute was
dead.

NOTE that the RPM power domain code (as opposed to the RPMh one) gets
this right.

Acked-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20190214173633.211000-1-dianders@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "I've been sitting on these longer than I meant, so the patch count is
  a bit higher than ideal for this part of the release. There's also
  some reverts of double-applied patches that brings the diffstat up a
  bit.

  With that said, the biggest changes are:

   - Revert of duplicate i2c device addition on two Aspeed (BMC)
     Devicetrees.

   - Move of two device nodes that got applied to the wrong part of the
     tree on ASpeed G6.

   - Regulator fix for Beaglebone X15 (adding 12/5V supplies)

   - Use interrupts for keys on Amlogic SM1 to avoid missed polls

  In addition to that, there is a collection of smaller DT fixes:

   - Power supply assignment fixes for i.MX6

   - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit

   - Build fixlets (selects) for davinci/omap2+

   - More interrupt number fixes for Stratix10, Amlogic SM1, etc.

   - ... and more similar fixes across different platforms

  And some non-DT stuff:

   - optee fix to register multiple shared pages properly

   - Clock calculation fixes for MMP3

   - Clock fixes for OMAP as well"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
  ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
  ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
  ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
  ARM: omap2plus: select RESET_CONTROLLER
  ARM: davinci: select CONFIG_RESET_CONTROLLER
  ARM: dts: aspeed: rainier: Fix fan fault and presence
  ARM: dts: aspeed: rainier: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
  ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Fix fsi master node
  ARM: dts: aspeed-g6: Fix FSI master location
  ARM: dts: mmp3: Fix the TWSI ranges
  clk: mmp2: Fix the order of timer mux parents
  ARM: mmp: do not divide the clock rate
  arm64: dts: rockchip: Fix IR on Beelink A1
  optee: Fix multi page dynamic shm pool alloc
  ...

The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

arm-soc: Amlogic fixes for v5.5-rc

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt
  dt-bindings: reset: meson8b: fix duplicate reset IDs
  soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init()
  soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors
  ARM: dts: meson8: fix the size of the PMU registers
  arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs

Link: https://lore.kernel.org/r/7hmuaweavi.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>

The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management.  It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.

Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this
checks the value of the static variable m3_ipc_state to see if the
wkup_m3 is ready. Currently this is populated during probe before
rproc_boot has been called, meaning there is a window of time that
wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not
ready, leading to invalid IPC calls to the wkup_m3 and system
instability.

To avoid this, move the population of the m3_ipc_state variable until
after rproc_boot has succeeded to guarantee a valid and usable handle
is always returned.

Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

pm_genpd_init() can return an error. Propagate the error code to prevent
the driver from indicating that it successfully probed while there were
errors during pm_genpd_init().

Fixes: eef3c2ba0a42a6 ("soc: amlogic: Add support for Everything-Else power domains controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

of_genpd_add_provider_onecell() can return an error. Propagate the error
so the driver registration fails when of_genpd_add_provider_onecell()
did not work.

Fixes: eef3c2ba0a42a6 ("soc: amlogic: Add support for Everything-Else power domains controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that we've merged late, but for the most part that have
  been sitting in -next for a while through platform maintainer trees:

   - Fixes to suspend/resume on Tegra, caused by the added features this
     merge window

   - Cleanups and minor fixes to TI additions this merge window

   - Tee fixes queued up late before the merge window, included here.

   - A handful of other fixlets

  There's also a refresh of the shareed config files (multi_v* on
  32-bit, and defconfig on 64-bit), to avoid conflicts when we get new
  contributions"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
  ARM: multi_v7_defconfig: Restore debugfs support
  ARM: defconfig: re-run savedefconfig on multi_v* configs
  arm64: defconfig: re-run savedefconfig
  ARM: pxa: Fix resource properties
  soc: mediatek: cmdq: fixup wrong input order of write api
  soc: aspeed: Fix snoop_file_poll()'s return type
  MAINTAINERS: Switch to Marvell addresses
  MAINTAINERS: update Cavium ThunderX drivers
  Revert "arm64: dts: juno: add dma-ranges property"
  MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer
  firmware: arm_scmi: Avoid double free in error flow
  arm64: dts: juno: Fix UART frequency
  ARM: dts: Fix sgx sysconfig register for omap4
  arm: socfpga: execute cold reboot by default
  ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
  ARM: dts: dra7: fix cpsw mdio fck clock
  ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
  ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
  soc/tegra: pmc: Add reset sources and levels on Tegra194
  soc/tegra: pmc: Add missing IRQ callbacks on Tegra194
  ...