linux-stable.git/drivers/soc, branch v5.4.301

soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS

2025-10-29T12:59:46+00:00

[ Upstream commit f87412d18edb5b8393eb8cb1c2d4a54f90185a21 ]

Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.

Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.

Fixes: 15b3bf61b8d4 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS")
Signed-off-by: Sneh Mankad 
Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

soc: qcom: mdt_loader: Deal with zero e_shentsize

2025-10-02T11:34:30+00:00

commit 25daf9af0ac1bf12490b723b5efaf8dcc85980bc upstream.

Firmware that doesn't provide section headers leave both e_shentsize and
e_shnum 0, which obvious isn't compatible with the newly introduced
stricter checks.

Make the section-related checks conditional on either of these values
being non-zero.

Fixes: 9f9967fed9d0 ("soc: qcom: mdt_loader: Ensure we don't read past the ELF header")
Reported-by: Val Packett 
Closes: https://lore.kernel.org/all/ece307c3-7d65-440f-babd-88cf9705b908@packett.cool/
Reported-by: Neil Armstrong 
Closes: https://lore.kernel.org/all/aec9cd03-6fc2-4dc8-b937-8b7cf7bf4128@linaro.org/
Signed-off-by: Bjorn Andersson 
Fixes: 9f35ab0e53cc ("soc: qcom: mdt_loader: Fix error return values in mdt_header_valid()")
Tested-by: Neil Armstrong  # on SM8650-QRD
Reviewed-by: Dmitry Baryshkov 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250730-mdt-loader-shentsize-zero-v1-1-04f43186229c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson 
Cc: Yongqin Liu 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: mdt_loader: Ensure we don't read past the ELF header

2025-08-28T14:21:35+00:00

[ Upstream commit 9f9967fed9d066ed3dae9372b45ffa4f6fccfeef ]

When the MDT loader is used in remoteproc, the ELF header is sanitized
beforehand, but that's not necessary the case for other clients.

Validate the size of the firmware buffer to ensure that we don't read
past the end as we iterate over the header. e_phentsize and e_shentsize
are validated as well, to ensure that the assumptions about step size in
the traversal are valid.

Fixes: 2aad40d911ee ("remoteproc: Move qcom_mdt_loader into drivers/soc/qcom")
Cc: stable@vger.kernel.org
Reported-by: Doug Anderson 
Signed-off-by: Bjorn Andersson 
Reviewed-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20250610-mdt-loader-validation-and-fixes-v2-1-f7073e9ab899@oss.qualcomm.com
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

soc/tegra: pmc: Ensure power-domains are in a known state

2025-08-28T14:21:31+00:00

commit b6bcbce3359619d05bf387d4f5cc3af63668dbaa upstream.

After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.

>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.

Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.

Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Jon Hunter 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled

2025-08-28T14:21:15+00:00

commit 56448e78a6bb4e1a8528a0e2efe94eff0400c247 upstream.

Mitigate e.g. the following:

    # echo 1e789080.lpc-snoop > /sys/bus/platform/drivers/aspeed-lpc-snoop/unbind
    ...
    [  120.363594] Unable to handle kernel NULL pointer dereference at virtual address 00000004 when write
    [  120.373866] [00000004] *pgd=00000000
    [  120.377910] Internal error: Oops: 805 [#1] SMP ARM
    [  120.383306] CPU: 1 UID: 0 PID: 315 Comm: sh Not tainted 6.15.0-rc1-00009-g926217bc7d7d-dirty #20 NONE
    ...
    [  120.679543] Call trace:
    [  120.679559]  misc_deregister from aspeed_lpc_snoop_remove+0x84/0xac
    [  120.692462]  aspeed_lpc_snoop_remove from platform_remove+0x28/0x38
    [  120.700996]  platform_remove from device_release_driver_internal+0x188/0x200
    ...

Fixes: 9f4f9ae81d0a ("drivers/misc: add Aspeed LPC snoop driver")
Cc: stable@vger.kernel.org
Cc: Jean Delvare 
Acked-by: Jean Delvare 
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-2-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery 
Signed-off-by: Greg Kroah-Hartman

soc: aspeed: lpc-snoop: Cleanup resources in stack-order

2025-08-28T14:21:15+00:00

commit 8481d59be606d2338dbfe14b04cdbd1a3402c150 upstream.

Free the kfifo after unregistering the miscdev in
aspeed_lpc_disable_snoop() as the kfifo is initialised before the
miscdev in aspeed_lpc_enable_snoop().

Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Cc: stable@vger.kernel.org
Cc: Jean Delvare 
Acked-by: Jean Delvare 
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-1-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery 
Signed-off-by: Greg Kroah-Hartman

soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()

2025-06-27T10:02:48+00:00

[ Upstream commit f1706e0e1a74b095cbc60375b9b1e6205f5f4c98 ]

devm_kasprintf() returns NULL when memory allocation fails. Currently,
aspeed_lpc_enable_snoop() does not check for this case, which results in a
NULL pointer dereference.

Add NULL check after devm_kasprintf() to prevent this issue.

Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Henry Martin 
Link: https://patch.msgid.link/20250401074647.21300-1-bsdhenrymartin@gmail.com
[arj: Fix Fixes: tag to use subject from 3772e5da4454]
Signed-off-by: Andrew Jeffery 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin

soc: aspeed: lpc: Fix impossible judgment condition

2025-06-27T10:02:47+00:00

[ Upstream commit d9f0a97e859bdcef51f9c187b1eb712eb13fd3ff ]

smatch error：
drivers/soc/aspeed/aspeed-lpc-snoop.c:169
aspeed_lpc_snoop_config_irq() warn: platform_get_irq() does not return zero

platform_get_irq() return non-zero IRQ number or negative error code,
change '!lpc_snoop->irq' to 'lpc_snoop->irq < 0' to fix this.

Fixes: 9f4f9ae81d0a ("drivers/misc: add Aspeed LPC snoop driver")
Signed-off-by: Su Hui 
Reviewed-by: Dan Carpenter 
Link: https://lore.kernel.org/r/20231027020703.1231875-1-suhui@nfschina.com
Signed-off-by: Andrew Jeffery 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin

soc: qcom: smem_state: fix missing of_node_put in error path

2025-03-13T11:43:09+00:00

commit 70096b4990848229d0784c5e51dc3c7c072f1111 upstream.

If of_parse_phandle_with_args() succeeds, the OF node reference should
be dropped, regardless of number of phandle arguments.

Cc: stable@vger.kernel.org
Fixes: 9460ae2ff308 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Krzysztof Kozlowski 
Reviewed-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20240822164853.231087-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: socinfo: Avoid out of bounds read of serial number

2025-03-13T11:43:09+00:00

commit 22cf4fae6660b6e1a583a41cbf84e3046ca9ccd0 upstream.

On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:

  db410c:/sys/devices/soc0$ cat serial_number
  2644893864

The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.

Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.

Cc: stable@vger.kernel.org
Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold 
Reviewed-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman