There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210409110243.41-1-linqiheng@huawei.com

Pull iommu updates from Joerg Roedel:

 - Big cleanup of almost unsused parts of the IOMMU API by Christoph
   Hellwig. This mostly affects the Freescale PAMU driver.

 - New IOMMU driver for Unisoc SOCs

 - ARM SMMU Updates from Will:
     - Drop vestigial PREFETCH_ADDR support (SMMUv3)
     - Elide TLB sync logic for empty gather (SMMUv3)
     - Fix "Service Failure Mode" handling (SMMUv3)
     - New Qualcomm compatible string (SMMUv2)

 - Removal of the AMD IOMMU performance counter writeable check on AMD.
   It caused long boot delays on some machines and is only needed to
   work around an errata on some older (possibly pre-production) chips.
   If someone is still hit by this hardware issue anyway the performance
   counters will just return 0.

 - Support for targeted invalidations in the AMD IOMMU driver. Before
   that the driver only invalidated a single 4k page or the whole IO/TLB
   for an address space. This has been extended now and is mostly useful
   for emulated AMD IOMMUs.

 - Several fixes for the Shared Virtual Memory support in the Intel VT-d
   driver

 - Mediatek drivers can now be built as modules

 - Re-introduction of the forcedac boot option which got lost when
   converting the Intel VT-d driver to the common dma-iommu
   implementation.

 - Extension of the IOMMU device registration interface and support
   iommu_ops to be const again when drivers are built as modules.

* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
  iommu: Streamline registration interface
  iommu: Statically set module owner
  iommu/mediatek-v1: Add error handle for mtk_iommu_probe
  iommu/mediatek-v1: Avoid build fail when build as module
  iommu/mediatek: Always enable the clk on resume
  iommu/fsl-pamu: Fix uninitialized variable warning
  iommu/vt-d: Force to flush iotlb before creating superpage
  iommu/amd: Put newline after closing bracket in warning
  iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
  iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
  iommu/amd: Remove performance counter pre-initialization test
  Revert "iommu/amd: Fix performance counter initialization"
  iommu/amd: Remove duplicate check of devid
  iommu/exynos: Remove unneeded local variable initialization
  iommu/amd: Page-specific invalidations for more than one page
  iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
  iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
  iommu/vt-d: Invalidate PASID cache when root/context entry changed
  iommu/vt-d: Remove WO permissions on second-level paging entries
  iommu/vt-d: Report the right page fault address
  ...

Pull pin control updates from Linus Walleij:
 "There is a lot going on!

  Core changes:

   - A semantic change to handle pinmux and pinconf in explicit order
     while up until now we depended on the semantic order in the device
     tree. The device tree is a functional programming language and does
     not imply any order, so the right thing is for the pin control core
     to provide these semantics.

   - Add a new pinmux-select debugfs file which makes it possible to go
     in and select functions for a pin manually (iteratively, at the
     prompt) for debugging purposes.

   - Fixes to gpio regmap handling for a new pin control driver making
     use of regmap-gpio.

   - Use octal permissions on debugfs files.

  New drivers:

   - A massive rewrite of the former custom pin control driver for MIPS
     Broadcom devices to instead use the pin control subsystem. New pin
     control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
     BCM63268 and BCM6318 SoC variants are implemented.

   - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
     in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
     supported.

   - Support for the Rockchip RK3568/RK3566 pin controller.

   - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.

   - Support for Mediatek MTK8195.

   - Add a new Xilinx ZynqMP pin control driver.

  Driver improvements and non-urgent fixes:

   - Modularization and improvements of the Rockchip drivers.

   - Some new pins added to the description of new Renesas SoCs.

   - Clarifications of the GPIO base calculation in the Intel driver.

   - Fix the function names for the MPP54 and MPP55 pins in the Armada
     CP110 pin controller.

   - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.

   - Support for ACPI probing of the Qualcomm SC8180x.

   - Fix interrupt clear status on rockchip

   - Fix some missing pins on the Ingenic JZ4770, some semantic fixes
     for the behaviour of the Ingenic pin controller. Add DMIC pins for
     JZ4780, X1000, X1500 and X1830.

   - A slew of janitorial like of_node_put() calls"

* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: Add Xilinx ZynqMP pinctrl driver support
  firmware: xilinx: Add pinctrl support
  pinctrl: rockchip: do coding style for mux route struct
  pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
  pinctrl: Introduce MODE group in enum pin_config_param
  pinctrl: Keep enum pin_config_param ordered by name
  dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
  pinctrl: core: Fix kernel doc string for pin_get_name()
  pinctrl: mediatek: use spin lock in mtk_rmw
  pinctrl: add drive for I2C related pins on MT8195
  pinctrl: add pinctrl driver on mt8195
  dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
  pinctrl: Ingenic: Add pinctrl driver for X2000.
  pinctrl: Ingenic: Add pinctrl driver for JZ4775.
  pinctrl: Ingenic: Add pinctrl driver for JZ4755.
  pinctrl: Ingenic: Add pinctrl driver for JZ4750.
  pinctrl: Ingenic: Add pinctrl driver for JZ4730.
  dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
  pinctrl: Ingenic: Reformat the code.
  pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "Almost all SoC code changes this time are for the TI OMAP platform,
  which continues its decade-long quest to move from describing a
  complex SoC in code to device tree.

  Aside from this, the Uniphier platform has a new maintainer and some
  platforms have minor bugfixes and cleanups that were not urgent enough
  for v5.12"

* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
  mailmap: Update email address for Nicolas Saenz
  MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
  ARM: exynos: correct kernel doc in platsmp
  ARM: hisi: use the correct HiSilicon copyright
  ARM: ux500: make ux500_cpu_die static
  ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
  ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
  ARM: at91: pm: Move prototypes to mutually included header
  ARM: OMAP2+: use true and false for bool variable
  ARM: OMAP2+: add missing call to of_node_put()
  ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  ARM: imx: Kconfig: Fix typo in help
  ARM: mach-imx: Fix a spelling in the file pm-imx5.c
  bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
  ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
  ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
  ARM: OMAP2+: Drop legacy platform data for omap5 l3
  ...

The intent here was to return negative error codes but it actually
returns positive values.  The problem is that type promotion with
ternary operations is quite complicated.

"ret" is an int.  "copied" is a u32.  And the snoop_file_read() function
returns long.  What happens is that "ret" is cast to u32 and becomes
positive then it's cast to long and it's still positive.

Fix this by removing the ternary so that "ret" is type promoted directly
to long.

Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Venture <venture@google.com>
Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda
Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Better to have a MODE group of settings to keep them together
when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE
to PIN_CONFIG_MODE_LOW_POWER.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "Another smaller set of fixes for three of the Arm platforms:

  TI OMAP:

     Fix swapped mmc device order also for omap3 that got changed with
     the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
     aliases should be board specific, all the mmc device instances are
     all there in the SoC, and we do probe them by default so that PM
     runtime can idle the devices if left enabled from the bootloader.

  Qualcomm Snapdragon:

     This bypasses the recently introduced interconnect handling in
     the GENI (serial engine) driver when running off ACPI, as this
     causes the GENI probe to fail and the Lenovo Yoga C630 to boot
     without keyboard and touchpad.

  Allwinner:

     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
     SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
     our headers"

* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
  MAINTAINERS: Match on allwinner keyword
  MAINTAINERS: Add our new mailing-list
  arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
  arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
  ARM: OMAP2+: Fix uninitialized sr_inst
  ARM: dts: Fix swapped mmc order for omap3
  ARM: OMAP2+: Fix warning for omap_init_time_of()
  soc: qcom: geni: shield geni_icc_get() for ACPI boot

NXP/FSL SoC driver updates for v5.13

- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
  for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers

* tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: enable acpi support in RCPM driver
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}*
  soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}*
  soc: fsl: guts: fix comment syntax in file
  soc: fsl: guts: remove unneeded semicolon
  soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlock
  soc: fsl: qbman: Delete useless kfree code
  soc: fsl: qbman: Ensure device cleanup is run for kexec

Link: https://lore.kernel.org/r/20210409205719.27927-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>