<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/soc, branch v5.10</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Merge tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes</title>
<updated>2020-11-26T21:07:22+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2020-11-26T21:07:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3a18293e4a0fa75366087c683bb959a8ff55111b'/>
<id>3a18293e4a0fa75366087c683bb959a8ff55111b</id>
<content type='text'>
NXP/FSL SoC driver fix for 5.10

DPAA2 DPIO driver
- Fix non-static cpumask for irq affinity setting

* tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)

Link: https://lore.kernel.org/r/20201125165922.15487-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
NXP/FSL SoC driver fix for 5.10

DPAA2 DPIO driver
- Fix non-static cpumask for irq affinity setting

* tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)

Link: https://lore.kernel.org/r/20201125165922.15487-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)</title>
<updated>2020-11-24T01:27:45+00:00</updated>
<author>
<name>Hao Si</name>
<email>si.hao@zte.com.cn</email>
</author>
<published>2020-10-20T02:18:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2663b3388551230cbc4606a40fabf3331ceb59e4'/>
<id>2663b3388551230cbc4606a40fabf3331ceb59e4</id>
<content type='text'>
The local variable 'cpumask_t mask' is in the stack memory, and its address
is assigned to 'desc-&gt;affinity' in 'irq_set_affinity_hint()'.
But the memory area where this variable is located is at risk of being
modified.

During LTP testing, the following error was generated:

Unable to handle kernel paging request at virtual address ffff000012e9b790
Mem abort info:
  ESR = 0x96000007
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000007
  CM = 0, WnR = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07
[ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003,
pmd=00000027b6d61003, pte=0000000000000000
Internal error: Oops: 96000007 [#1] PREEMPT SMP
Modules linked in: xt_conntrack
Process read_all (pid: 20171, stack limit = 0x0000000044ea4095)
CPU: 14 PID: 20171 Comm: read_all Tainted: G    B   W
Hardware name: NXP Layerscape LX2160ARDB (DT)
pstate: 80000085 (Nzcv daIf -PAN -UAO)
pc : irq_affinity_hint_proc_show+0x54/0xb0
lr : irq_affinity_hint_proc_show+0x4c/0xb0
sp : ffff00001138bc10
x29: ffff00001138bc10 x28: 0000ffffd131d1e0
x27: 00000000007000c0 x26: ffff8025b9480dc0
x25: ffff8025b9480da8 x24: 00000000000003ff
x23: ffff8027334f8300 x22: ffff80272e97d000
x21: ffff80272e97d0b0 x20: ffff8025b9480d80
x19: ffff000009a49000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000040
x11: 0000000000000000 x10: ffff802735b79b88
x9 : 0000000000000000 x8 : 0000000000000000
x7 : ffff000009a49848 x6 : 0000000000000003
x5 : 0000000000000000 x4 : ffff000008157d6c
x3 : ffff00001138bc10 x2 : ffff000012e9b790
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 irq_affinity_hint_proc_show+0x54/0xb0
 seq_read+0x1b0/0x440
 proc_reg_read+0x80/0xd8
 __vfs_read+0x60/0x178
 vfs_read+0x94/0x150
 ksys_read+0x74/0xf0
 __arm64_sys_read+0x24/0x30
 el0_svc_common.constprop.0+0xd8/0x1a0
 el0_svc_handler+0x34/0x88
 el0_svc+0x10/0x14
Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041)
---[ end trace b495bdcb0b3b732b ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15
Kernel Offset: disabled
CPU features: 0x0,21006008
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception ]---

Fix it by using 'cpumask_of(cpu)' to get the cpumask.

Signed-off-by: Hao Si &lt;si.hao@zte.com.cn&gt;
Signed-off-by: Lin Chen &lt;chen.lin5@zte.com.cn&gt;
Signed-off-by: Yi Wang &lt;wang.yi59@zte.com.cn&gt;
Signed-off-by: Li Yang &lt;leoyang.li@nxp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The local variable 'cpumask_t mask' is in the stack memory, and its address
is assigned to 'desc-&gt;affinity' in 'irq_set_affinity_hint()'.
But the memory area where this variable is located is at risk of being
modified.

During LTP testing, the following error was generated:

Unable to handle kernel paging request at virtual address ffff000012e9b790
Mem abort info:
  ESR = 0x96000007
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000007
  CM = 0, WnR = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07
[ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003,
pmd=00000027b6d61003, pte=0000000000000000
Internal error: Oops: 96000007 [#1] PREEMPT SMP
Modules linked in: xt_conntrack
Process read_all (pid: 20171, stack limit = 0x0000000044ea4095)
CPU: 14 PID: 20171 Comm: read_all Tainted: G    B   W
Hardware name: NXP Layerscape LX2160ARDB (DT)
pstate: 80000085 (Nzcv daIf -PAN -UAO)
pc : irq_affinity_hint_proc_show+0x54/0xb0
lr : irq_affinity_hint_proc_show+0x4c/0xb0
sp : ffff00001138bc10
x29: ffff00001138bc10 x28: 0000ffffd131d1e0
x27: 00000000007000c0 x26: ffff8025b9480dc0
x25: ffff8025b9480da8 x24: 00000000000003ff
x23: ffff8027334f8300 x22: ffff80272e97d000
x21: ffff80272e97d0b0 x20: ffff8025b9480d80
x19: ffff000009a49000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000040
x11: 0000000000000000 x10: ffff802735b79b88
x9 : 0000000000000000 x8 : 0000000000000000
x7 : ffff000009a49848 x6 : 0000000000000003
x5 : 0000000000000000 x4 : ffff000008157d6c
x3 : ffff00001138bc10 x2 : ffff000012e9b790
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 irq_affinity_hint_proc_show+0x54/0xb0
 seq_read+0x1b0/0x440
 proc_reg_read+0x80/0xd8
 __vfs_read+0x60/0x178
 vfs_read+0x94/0x150
 ksys_read+0x74/0xf0
 __arm64_sys_read+0x24/0x30
 el0_svc_common.constprop.0+0xd8/0x1a0
 el0_svc_handler+0x34/0x88
 el0_svc+0x10/0x14
Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041)
---[ end trace b495bdcb0b3b732b ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15
Kernel Offset: disabled
CPU features: 0x0,21006008
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception ]---

Fix it by using 'cpumask_of(cpu)' to get the cpumask.

Signed-off-by: Hao Si &lt;si.hao@zte.com.cn&gt;
Signed-off-by: Lin Chen &lt;chen.lin5@zte.com.cn&gt;
Signed-off-by: Yi Wang &lt;wang.yi59@zte.com.cn&gt;
Signed-off-by: Li Yang &lt;leoyang.li@nxp.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>soc: ti: ti_sci_pm_domains: check for proper args count in xlate</title>
<updated>2020-10-29T21:13:38+00:00</updated>
<author>
<name>Tero Kristo</name>
<email>t-kristo@ti.com</email>
</author>
<published>2020-10-29T09:33:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3d696f42c7f4bfcc54bde545898d4b89a74f9cc0'/>
<id>3d696f42c7f4bfcc54bde545898d4b89a74f9cc0</id>
<content type='text'>
K2G devices still only use single parameter for power-domains property,
so check for this properly in the driver. Without this, every peripheral
fails to probe resulting in boot failure.

Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Reported-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tero Kristo &lt;t-kristo@ti.com&gt;
Acked-by: Nishanth Menon &lt;nm@ti.com&gt;
Acked-by: Santosh Shilimkar &lt;ssantosh@kernel.org&gt;
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
K2G devices still only use single parameter for power-domains property,
so check for this properly in the driver. Without this, every peripheral
fails to probe resulting in boot failure.

Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Reported-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tero Kristo &lt;t-kristo@ti.com&gt;
Acked-by: Nishanth Menon &lt;nm@ti.com&gt;
Acked-by: Santosh Shilimkar &lt;ssantosh@kernel.org&gt;
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2020-10-24T17:44:18+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-10-24T17:44:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e533cda12d8f0e7936354bafdc85c81741f805d2'/>
<id>e533cda12d8f0e7936354bafdc85c81741f805d2</id>
<content type='text'>
Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2020-10-24T17:39:22+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-10-24T17:39:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2e368dd2bbeac6bfd50886371db185b1092067b4'/>
<id>2e368dd2bbeac6bfd50886371db185b1092067b4</id>
<content type='text'>
Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2020-10-24T17:33:08+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-10-24T17:33:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e731f3146ff3bba5424b40140e1a7e6f92e94964'/>
<id>e731f3146ff3bba5424b40140e1a7e6f92e94964</id>
<content type='text'>
Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2020-10-24T17:26:06+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-10-24T17:26:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1f70935f637dfba226bf77182c2629fde61ed06e'/>
<id>1f70935f637dfba226bf77182c2629fde61ed06e</id>
<content type='text'>
Pull ARM SoC fixes from Olof Johansson:
 "I had queued up a batch of fixes that got a bit close to the release
  for sending in before the merge window opened, so I'm including them
  in the merge window batch instead.

  Mostly smaller DT tweaks and fixes, the usual mix that we tend to have
  through the releases"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
  ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
  ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
  soc: actions: include header to fix missing prototype
  arm64: dts: ti: k3-j721e: Rename mux header and update macro names
  soc: qcom: pdr: Fixup array type of get_domain_list_resp message
  arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
  arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
  arm64: dts: sdm630: Temporarily disable SMMUs by default
  arm64: dts: sdm845: Fixup OPP table for all qup devices
  arm64: dts: allwinner: h5: remove Mali GPU PMU module
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
  soc: xilinx: Fix error code in zynqmp_pm_probe()
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM SoC fixes from Olof Johansson:
 "I had queued up a batch of fixes that got a bit close to the release
  for sending in before the merge window opened, so I'm including them
  in the merge window batch instead.

  Mostly smaller DT tweaks and fixes, the usual mix that we tend to have
  through the releases"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
  ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
  ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
  soc: actions: include header to fix missing prototype
  arm64: dts: ti: k3-j721e: Rename mux header and update macro names
  soc: qcom: pdr: Fixup array type of get_domain_list_resp message
  arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
  arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
  arm64: dts: sdm630: Temporarily disable SMMUs by default
  arm64: dts: sdm845: Fixup OPP table for all qup devices
  arm64: dts: allwinner: h5: remove Mali GPU PMU module
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
  soc: xilinx: Fix error code in zynqmp_pm_probe()
</pre>
</div>
</content>
</entry>
<entry>
<title>PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers</title>
<updated>2020-10-22T16:38:21+00:00</updated>
<author>
<name>Ulf Hansson</name>
<email>ulf.hansson@linaro.org</email>
</author>
<published>2020-10-06T16:05:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a7305e684fcfb33029fe3d0af6b7d8dc4c8ca7a1'/>
<id>a7305e684fcfb33029fe3d0af6b7d8dc4c8ca7a1</id>
<content type='text'>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the qcom-cpr driver to the qcom directory.

Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Acked-by: Bjorn Andersson &lt;bjorn.andersson@linaro.org&gt;
Acked-by: Niklas Cassel &lt;nks@flawful.org&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the qcom-cpr driver to the qcom directory.

Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Acked-by: Bjorn Andersson &lt;bjorn.andersson@linaro.org&gt;
Acked-by: Niklas Cassel &lt;nks@flawful.org&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PM: AVS: smartreflex Move driver to soc specific drivers</title>
<updated>2020-10-16T16:28:43+00:00</updated>
<author>
<name>Ulf Hansson</name>
<email>ulf.hansson@linaro.org</email>
</author>
<published>2020-10-06T16:05:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bca815d620544c27288abf4841e39922d694425c'/>
<id>bca815d620544c27288abf4841e39922d694425c</id>
<content type='text'>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the smartreflex driver for OMAP to the ti directory.

Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Reviewed-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the smartreflex driver for OMAP to the ti directory.

Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Reviewed-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers</title>
<updated>2020-10-16T16:23:15+00:00</updated>
<author>
<name>Ulf Hansson</name>
<email>ulf.hansson@linaro.org</email>
</author>
<published>2020-10-06T16:05:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e943c43b32ce15ef23cc6b4574567b045c96c23b'/>
<id>e943c43b32ce15ef23cc6b4574567b045c96c23b</id>
<content type='text'>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the rockchip-io driver to the rockchip directory.

Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Acked-by: Heiko Stuebner &lt;heiko@sntech.de&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the rockchip-io driver to the rockchip directory.

Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Acked-by: Heiko Stuebner &lt;heiko@sntech.de&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
