commit 4d486e0083796b54d5aeddd7a5794f897fca1008 upstream.

Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.

On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.

cpm_reset() cannot be called during initcalls because the CPM is
needed for console.

This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.

The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.

[    0.000000] Unable to handle kernel paging request for data at address 0x00000008
[    0.000000] Faulting instruction address: 0xc01acce0
[    0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.000000] PREEMPT CMPC885
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[    0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[    0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[    0.000000] REGS: c0537e50 TRAP: 0300   Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[    0.000000] MSR: 00001032 <ME,IR,DR,RI>  CR: 28044428  XER: 00000000
[    0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[    0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[    0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[    0.000000] Call Trace:
[    0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[    0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[    0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[    0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[    0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[    0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[    0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[    0.000000] Instruction dump:
[    0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[    0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[    0.000000] ---[ end trace dc8fa200cb88537f ]---

fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5dc6f3fedee58efa343e822558fc3e2f0eb2ad1f upstream.

of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()

An Oops is encountered without this fix.

fixes: 1e714e54b5ca5 ("powerpc: qe_lib-gpio: use gpiochip data pointer")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Improved and new platform support for various SoCs:

  New SoC support:
   - Broadcom BCM23550
   - Freescale i.MX7Solo
   - Qualcomm MDM9615
   - Renesas r8a7792

  Improvements:
   - convert clps711x to multiplatform
   - debug uart improvements for Atmel platforms
   - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
   - OMAP tweaks and improvements to hwmod
   - OMAP support for kexec on SMP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: davinci: fix build break because of undeclared dm365_evm_snd_data
  ARM: s3c64xx: smartq: Avoid sparse warnings
  ARM: sti: Implement dummy L2 cache's write_sec
  ARM: STi: Update machine _namestr to be more generic.
  arm: meson: explicitly select clk drivers
  ARM: tango: add Suspend-to-RAM support
  ARM: hisi: consolidate the hisilicon machine entries
  ARM: tango: fix CONFIG_HOTPLUG_CPU=n build
  MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry
  MAINTAINERS: Update BCM63XX entry
  MAINTAINERS: Add NS2 entry
  MAINTAINERS: Fix nsp false-positives
  MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries
  ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs
  ARM: clps711x: Switch to MULTIPLATFORM
  ARM: clps711x: Remove boards support
  ARM: clps711x: Add basic DT support
  ARM: clps711x: Reduce static map size
  ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu
  ARM: oxnas: Change OX810SE default driver config
  ...

Merge "Samsung drivers/soc update for v4.8, part 3" into next/drivers:

1. Fix size of allocation for Exynos SROM registers (too much was allocated).
2. Constify fix.

* tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: pmu: Constify arrays with PMU data
  memory: samsung: exynos-srom: Fix wrong count of registers

Merge "Ux500 cleanups from Arnd" from Linus Walleij:

This is a set of cleanups for the Ux500 that reduce the number
of machine-local files and boardfile-type data for regulators
and ASoC.

* tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data

As the ux500 id code is basically a standalone driver, we can move it
out of the arch code into drivers/soc/ux500.

This is a user-visible change, as it moves all the devices in sysfs
from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a
separate device.

Originally the idea was to put all on-chip devices under the soc node,
and ux500 was the first platform to have this device, but later platforms
almost all didn't follow that pattern, so this makes the platform do
the same thing as everyone else.

Since the platform is really obsolete now, I am optimistic that nothing
will break after moving the devices around.

As the SoC driver no longer has access to the private header files,
I'm changing the code to instead look up the address of the backupram
from devicetree, which is a good idea anyway.

Finally, having a separate Kconfig symbol means the driver is now
optional and could even be a loadable module rather than always being
built-in if we allowed that for soc_device.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixup mising Makefile, fixup BB_UID_BASE to fc0]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We get a harmless warning if the RASPBERRYPI_POWER driver is enabled without
CONFIG_OF during compile testing:

warning: RASPBERRYPI_POWER selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)

There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can
replace the 'select' with a dependency.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eric Anholt <eric@anholt.net>

soc/tegra: Changes for v4.8-rc1

Contains fixes and cleanups to the PMC driver, as well as some fixes for
the generic PM domain support and some prep work to support PCIe on 64-
bit ARM.

* tag 'tegra-for-4.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: Stub out PCIe IRQ workaround on 64-bit ARM
  soc/tegra: pmc: Enable XUSB partitions on boot
  soc/tegra: pmc: Initialise power partitions early
  soc/tegra: pmc: Add specific error messages
  soc/tegra: pmc: Use whitespace more consistently
  soc/tegra: pmc: Don't probe PMC if early initialisation fails
  soc/tegra: pmc: Add missing of_node_put()
  soc/tegra: pmc: Ensure mutex is always initialised
  soc/tegra: pmc: Don't populate SoC data until register space is mapped
  soc/tegra: pmc: Fix early initialisation of PMC
  soc/tegra: pmc: Ensure powergate is available when powering on
  soc/tegra: pmc: Initialise resets associated with a power partition
  soc/tegra: pmc: Use register definitions instead of magic values

Signed-off-by: Olof Johansson <olof@lixom.net>

Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

* Prepare for handling SYSC interrupt configuration purely
  from DT in the rcar-sysc driver for new SoCs, while preserving
  backward compatibility with old DTBs for R-Car H1, H2, and M2-W
* Add R8A7792 support

* tag 'renesas-rcar-sysc2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper
  soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver
  soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains
  soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()
  soc: renesas: rcar-sysc: add R8A7792 support

Signed-off-by: Olof Johansson <olof@lixom.net>