linux-stable.git/drivers/soc/tegra, branch linux-5.15.y Linux kernel stable tree soc/tegra: pmc: Ensure power-domains are in a known state 2025-08-28T14:24:29+00:00 Jon Hunter jonathanh@nvidia.com 2025-07-31T12:18:32+00:00 90cc9e7d82e18097fc2e363be8b2f0ae3a0c24b1 commit b6bcbce3359619d05bf387d4f5cc3af63668dbaa upstream. After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board failed to boot. Looking into this issue, before this commit was applied, if any of the Tegra power-domains were in 'on' state when the kernel booted, they were being turned off by the genpd core before any driver had chance to request them. This was purely by luck and a consequence of the power-domains being turned off earlier during boot. After this commit was applied, any power-domains in the 'on' state are kept on for longer during boot and therefore, may never transitioned to the off state before they are requested/used. The hang on the Tegra210 Jetson TX1 is caused because devices in some power-domains are accessed without the power-domain being turned off and on, indicating that the power-domain is not in a completely on state. >From reviewing the Tegra PMC driver code, if a power-domain is in the 'on' state there is no guarantee that all the necessary clocks associated with the power-domain are on and even if they are they would not have been requested via the clock framework and so could be turned off later. Some power-domains also have a 'clamping' register that needs to be configured as well. In short, if a power-domain is already 'on' it is difficult to know if it has been configured correctly. Given that the power-domains happened to be switched off during boot previously, to ensure that they are in a good known state on boot, fix this by switching off any power-domains that are on initially when registering the power-domains with the genpd framework. Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets associated with a power partition") updated the tegra_powergate_of_get_resets() function to pass the 'off' to ensure that the resets for the power-domain are in the correct state on boot. However, now that we may power off a domain on boot, if it is on, it is better to move this logic into the tegra_powergate_add() function so that there is a single place where we are handling the initial state of the power-domain. Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b6bcbce3359619d05bf387d4f5cc3af63668dbaa upstream.

After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.

>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.

Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.

Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA 2022-10-26T10:35:00+00:00 Dmitry Osipenko digetx@gmail.com 2020-09-23T00:34:21+00:00 7247a1d7a46ae9dbb12fd82947ae6497824a38d4 [ Upstream commit 2254182807fc09ba9dec9a42ef239e373796f1b2 ] The DMA subsystem could be entirely disabled in Kconfig and then the TEGRA20_APB_DMA option isn't available too. Hence kernel configuration fails if DMADEVICES Kconfig option is disabled due to the unsatisfiable dependency. The FUSE driver isn't a critical driver and currently it only provides NVMEM interface to userspace which isn't known to be widely used, and thus, it's fine if FUSE driver fails to load. Let's remove the erroneous Kconfig dependency and let the FUSE driver to fail the probing if DMA is unavailable. Fixes: 19d41e5e9c68 ("soc/tegra: fuse: Add APB DMA dependency for Tegra20") Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209301 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2254182807fc09ba9dec9a42ef239e373796f1b2 ]

The DMA subsystem could be entirely disabled in Kconfig and then the
TEGRA20_APB_DMA option isn't available too. Hence kernel configuration
fails if DMADEVICES Kconfig option is disabled due to the unsatisfiable
dependency.

The FUSE driver isn't a critical driver and currently it only provides
NVMEM interface to userspace which isn't known to be widely used, and
thus, it's fine if FUSE driver fails to load.

Let's remove the erroneous Kconfig dependency and let the FUSE driver to
fail the probing if DMA is unavailable.

Fixes: 19d41e5e9c68 ("soc/tegra: fuse: Add APB DMA dependency for Tegra20")
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209301
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc/tegra: fuse: Fix bitwise vs. logical OR warning 2021-12-22T08:32:43+00:00 Nathan Chancellor nathan@kernel.org 2021-12-10T16:55:29+00:00 12dc89ccaf2024d953235ca2defc40840c27965d [ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ] A new warning in clang points out two instances where boolean expressions are being used with a bitwise OR instead of logical OR: drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning 2 warnings generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this instance, tegra_fuse_read_spare() is not semantically returning a boolean, it is returning a bit value. Use u32 for its return type so that it can be used with either bitwise or boolean operators without any warnings. Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification") Link: https://github.com/ClangBuiltLinux/linux/issues/1488 Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ]

A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:

drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.

The motivation for the warning is that logical operations short circuit
while bitwise operations do not.

In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.

Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification")
Link: https://github.com/ClangBuiltLinux/linux/issues/1488
Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
soc/tegra: Fix an error handling path in tegra_powergate_power_up() 2021-11-18T18:16:51+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-06-27T15:54:31+00:00 ee65ec08d36b47db0f1e797c6a98803302f7d403 [ Upstream commit 986b5094708e508baa452a23ffe809870934a7df ] If an error occurs after a successful tegra_powergate_enable_clocks() call, it must be undone by a tegra_powergate_disable_clocks() call, as already done in the below and above error handling paths of this function. Update the 'goto' to branch at the correct place of the error handling path. Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 986b5094708e508baa452a23ffe809870934a7df ]

If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.

Update the 'goto' to branch at the correct place of the error handling
path.

Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2021-09-01T22:25:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-01T22:25:28+00:00 866147b8fa59530812fc769027a94468d89401e7 Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ... 
Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 2021-08-11T09:55:56+00:00 Dmitry Osipenko digetx@gmail.com 2021-08-02T22:13:35+00:00 59c6fceb2ecc382c3d20508a235b539bf23af1f0 The FUSE clock should be enabled during suspend on Tegra124. Currently clk driver enables it on all SoCs, but FUSE may require a higher core voltage on Tegra30 while enabled. Move the quirk into the FUSE driver and make it specific to Tegra124. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
The FUSE clock should be enabled during suspend on Tegra124. Currently
clk driver enables it on all SoCs, but FUSE may require a higher core
voltage on Tegra30 while enabled. Move the quirk into the FUSE driver
and make it specific to Tegra124.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: fuse: Add runtime PM support 2021-08-11T09:55:04+00:00 Dmitry Osipenko digetx@gmail.com 2021-08-02T22:13:34+00:00 24a15252ff049ca76bdcc51dd445503b88b2c6df The Tegra FUSE belongs to the core power domain and we're going to enable GENPD support for the core domain. Now FUSE device must be resumed using runtime PM API in order to initialize the FUSE power state. Add runtime PM support to the FUSE driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
The Tegra FUSE belongs to the core power domain and we're going to enable
GENPD support for the core domain. Now FUSE device must be resumed using
runtime PM API in order to initialize the FUSE power state. Add runtime PM
support to the FUSE driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: fuse: Clear fuse->clk on driver probe failure 2021-08-11T09:54:48+00:00 Dmitry Osipenko digetx@gmail.com 2021-08-02T22:13:33+00:00 a65a4ea1563218b401a9a638a198e2b8165e967a The fuse->clk must be cleared if FUSE driver fails to probe, otherwise tegra_fuse_readl() will crash. It's unlikely to happen in practice, nevertheless let's correct it for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
The fuse->clk must be cleared if FUSE driver fails to probe, otherwise
tegra_fuse_readl() will crash. It's unlikely to happen in practice,
nevertheless let's correct it for completeness.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: pmc: Prevent racing with cpuilde driver 2021-08-11T09:51:39+00:00 Dmitry Osipenko digetx@gmail.com 2021-07-18T21:27:05+00:00 9c93ccfc86f2cdeab8a34408759abad594e439b9 Both PMC and cpuidle drivers are probed at the same init level and cpuidle depends on the PMC suspend mode. Add new default suspend mode that indicates whether PMC driver has been probed and reset the mode in a case of deferred probe of the PMC driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Both PMC and cpuidle drivers are probed at the same init level and
cpuidle depends on the PMC suspend mode. Add new default suspend mode
that indicates whether PMC driver has been probed and reset the mode in
a case of deferred probe of the PMC driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: bpmp: Remove unused including <linux/version.h> 2021-08-11T09:51:39+00:00 Cai Huoqing caihuoqing@baidu.com 2021-07-27T09:28:54+00:00 158a9b47a491dd73e73a306e962d4c9a01270132 Remove including <linux/version.h> that don't need it. V1->V2: Split the patch in two Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Remove including <linux/version.h> that don't need it.

V1->V2: Split the patch in two

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>