linux-stable.git/drivers/soc/qcom, branch v6.7.2

soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset

2024-01-25T23:44:53+00:00

[ Upstream commit 110cb8d861cc1a040cdab495b22ac436c49d1454 ]

According to documentation, it has increments of 4, not 8.

Fixes: c72ca343f911 ("soc: qcom: llcc: Add v4.1 HW version support")
Reported-by: Unnathi Chalicheemala 
Reviewed-by: Satya Durga Srinivasu Prabhala 
Reviewed-by: Konrad Dybcio 
Signed-off-by: Abel Vesa 
Link: https://lore.kernel.org/r/20231012160509.184891-1-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration

2024-01-25T23:44:53+00:00

[ Upstream commit eed6e57e9f3e2beac37563eb6a0129549daa330e ]

Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can
 write to llcc") add the support for chipset where capacity based
allocation and retention through power collapse can be programmed
based on content of SCT table mentioned in the llcc driver where
the target like sdm845 where the entire programming related to it
is controlled in firmware. However, the commit introduces a bug
where capacity/retention register get overwritten each time it
gets programmed for each slice and that results in misconfiguration
of the register based on SCT table and that is not expected
behaviour instead it should be read modify write to retain the
configuration of other slices.

This issue is totally caught from code review and programming test
and not through any power/perf numbers so, it is not known what
impact this could make if we don't have this change however,
this feature are for these targets and they should have been
programmed accordingly as per their configuration mentioned in
SCT table like others bits information.

This change brings one difference where it keeps capacity/retention
bits of the slices that are not mentioned in SCT table in unknown
state where as earlier it was initialized to zero.

Fixes: c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write to llcc")
Signed-off-by: Atul Dhudase 
Signed-off-by: Mukesh Ojha 
Reviewed-by: Douglas Anderson 
Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-11-02T00:46:51+00:00

Pull SoC driver updates from Arnd Bergmann:
 "The highlights for the driver support this time are

   - Qualcomm platforms gain support for the Qualcomm Secure Execution
     Environment firmware interface to access EFI variables on certain
     devices, and new features for multiple platform and firmware
     drivers.

   - Arm FF-A firmware support gains support for v1.1 specification
     features, in particular notification and memory transaction
     descriptor changes.

   - SCMI firmware support now support v3.2 features for clock and DVFS
     configuration and a new transport for Qualcomm platforms.

   - Minor cleanups and bugfixes are added to pretty much all the active
     platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
     amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
     more.

     In particular, this contains portions of the treewide conversion to
     use __counted_by annotations and the device_get_match_data helper"

* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
  soc: qcom: pmic_glink_altmode: Print return value on error
  firmware: qcom: scm: remove unneeded 'extern' specifiers
  firmware: qcom: scm: add a missing forward declaration for struct device
  firmware: qcom: move Qualcomm code into its own directory
  soc: samsung: exynos-chipid: Convert to platform remove callback returning void
  soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
  soc: qcom: pmic_glink: fix connector type to be DisplayPort
  soc: ti: k3-socinfo: Avoid overriding return value
  soc: ti: k3-socinfo: Fix typo in bitfield documentation
  soc: ti: knav_qmss_queue: Use device_get_match_data()
  firmware: ti_sci: Use device_get_match_data()
  firmware: qcom: qseecom: add missing include guards
  soc/pxa: ssp: Convert to platform remove callback returning void
  soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
  soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
  soc/loongson: loongson2_guts: Convert to platform remove callback returning void
  soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
  soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
  ...

soc: qcom: pmic_glink_altmode: Print return value on error

2023-10-22T16:20:40+00:00

It can be useful to know with which return value for example the
typec_retimer_set call failed, so include this info in the dev_err
prints.

Signed-off-by: Luca Weiss 
Link: https://lore.kernel.org/r/20231017-glink-altmode-ret-v2-1-921aa7cfc381@fairphone.com
Signed-off-by: Bjorn Andersson

soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()

2023-10-16T18:45:17+00:00

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.

This code was found with the help of Coccinelle, and audited and
fixed manually.

Signed-off-by: "Gustavo A. R. Silva" 
Reviewed-by: Justin Stitt 
Reviewed-by: Kees Cook 
Link: https://lore.kernel.org/r/ZSRw6RNi3Crhd32H@work
Signed-off-by: Bjorn Andersson

soc: qcom: pmic_glink: fix connector type to be DisplayPort

2023-10-16T18:44:43+00:00

As it was pointed out by Simon Ser, the DRM_MODE_CONNECTOR_USB connector
is reserved for the GUD devices. Other drivers (i915, amdgpu) use
DRM_MODE_CONNECTOR_DisplayPort even if the DP stream is handled by the
USB-C altmode. While we are still working on implementing the proper way
to let userspace know that the DP is wrapped into USB-C, change
connector type to be DRM_MODE_CONNECTOR_DisplayPort.

Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: Simon Ser 
Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Neil Armstrong 
Acked-by: Simon Ser 
Link: https://lore.kernel.org/r/20231010225229.77027-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson

pmdomain: qcom: Move Kconfig options to the pmdomain subsystem

2023-10-04T21:41:18+00:00

The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.

Cc: Bjorn Andersson 
Cc: Konrad Dybcio 
Cc: Andy Gross 
Cc: 
Acked-by: Konrad Dybcio 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Ulf Hansson

soc: qcom: socinfo: Convert to platform remove callback returning void

2023-10-02T18:30:39+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Acked-by: Konrad Dybcio  # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson

soc: qcom: smsm: Convert to platform remove callback returning void

2023-10-02T18:30:35+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Acked-by: Konrad Dybcio  # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson

soc: qcom: smp2p: Convert to platform remove callback returning void

2023-10-02T18:30:32+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Acked-by: Konrad Dybcio  # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson