linux-stable.git/drivers/soc/qcom, branch v5.4.78

soc: qcom: rpmh-rsc: Set suppress_bind_attrs flag

2020-08-19T06:15:59+00:00

[ Upstream commit 1a53ce9ab4faeb841b33d62d23283dc76c0e7c5a ]

rpmh-rsc driver is fairly core to system and should not be removable
once its probed. However it allows to unbind driver from sysfs using
below command which results into a crash on sc7180.

echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind

Lets prevent unbind at runtime by setting suppress_bind_attrs flag.

Reviewed-by: Stephen Boyd 
Signed-off-by: Maulik Shah 
Link: https://lore.kernel.org/r/1592808805-2437-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner

2020-07-29T08:18:25+00:00

commit 35bb4b22f606c0cc8eedf567313adc18161b1af4 upstream.

Adding an item into the cache should never be able to make the cache
cleaner.  Use "|=" rather than "=" to update the dirty flag.

Reviewed-by: Matthias Kaehlcke 
Reviewed-by: Maulik Shah  Thanks, Maulik
Reviewed-by: Bjorn Andersson 
Fixes: bb7000677a1b ("soc: qcom: rpmh: Update dirty flag only when data changes")
Reported-by: Stephen Boyd 
Signed-off-by: Douglas Anderson 
Link: https://lore.kernel.org/r/20200417141531.1.Ia4b74158497213eabad7c3d474c50bfccb3f342e@changeid
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request

2020-07-22T07:33:06+00:00

commit 38427e5a47bf83299da930bd474c6cb2632ad810 upstream.

When there are more than one WAKE TCS available and there is no dedicated
ACTIVE TCS available, invalidating all WAKE TCSes and waiting for current
transfer to complete in first WAKE TCS blocks using another free WAKE TCS
to complete current request.

Remove rpmh_rsc_invalidate() to happen from tcs_write() when WAKE TCSes
is re-purposed to be used for Active mode. Clear only currently used
WAKE TCS's register configuration.

Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Maulik Shah 
Reviewed-by: Douglas Anderson 
Reviewed-by: Stephen Boyd 
Link: https://lore.kernel.org/r/1586703004-13674-7-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS

2020-07-22T07:33:06+00:00

commit 15b3bf61b8d48f8e0ccd9d7f1bcb468b543da396 upstream.

For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.

Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.

Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N 
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah 
Reviewed-by: Douglas Anderson 
Reviewed-by: Stephen Boyd 
Link: https://lore.kernel.org/r/1586703004-13674-6-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data

2020-07-22T07:33:05+00:00

commit f5ac95f9ca2f439179a5baf48e1c0f22f83d936e upstream.

TCSes have previously programmed data when rpmh_flush() is called.
This can cause old data to trigger along with newly flushed.

Fix this by cleaning SLEEP and WAKE TCSes before new data is flushed.

With this there is no need to invoke rpmh_rsc_invalidate() call from
rpmh_invalidate().

Simplify rpmh_invalidate() by moving invalidate_batch() inside.

Fixes: 600513dfeef3 ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah 
Reviewed-by: Douglas Anderson 
Reviewed-by: Stephen Boyd 
Link: https://lore.kernel.org/r/1586703004-13674-4-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: rpmh: Update dirty flag only when data changes

2020-07-22T07:33:05+00:00

commit bb7000677a1b287206c8d4327c62442fa3050a8f upstream.

Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.

Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.

Fixes: 600513dfeef3 ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah 
Reviewed-by: Srinivas Rao L 
Reviewed-by: Evan Green 
Reviewed-by: Douglas Anderson 
Reviewed-by: Stephen Boyd 
Link: https://lore.kernel.org/r/1586703004-13674-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: socinfo: add missing soc_id sysfs entry

2020-07-22T07:33:04+00:00

commit 27a344139c186889d742764d3c2a62b395949cef upstream.

Looks like SoC ID is not exported to sysfs for some reason.
This patch adds it!

This is mostly used by userspace libraries like Snapdragon
Neural Processing Engine (SNPE) SDK for checking supported SoC info.

Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver")
Reviewed-by: Stephen Boyd 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20200319121418.5180-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: rpmhpd: Set 'active_only' for active only power domains

2020-02-14T21:34:16+00:00

commit 5d0d4d42bed0090d3139e7c5ca1587d76d48add6 upstream.

The 'active_only' attribute was accidentally never set to true for any
power domains meaning that all the code handling this attribute was
dead.

NOTE that the RPM power domain code (as opposed to the RPMh one) gets
this right.

Acked-by: Rajendra Nayak 
Reviewed-by: Stephen Boyd 
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Douglas Anderson 
Link: https://lore.kernel.org/r/20190214173633.211000-1-dianders@chromium.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

soc: qcom: llcc: Name regmaps to avoid collisions

2020-01-26T09:01:02+00:00

commit 2bfd3e7651addcaf48f12d4f11ea9d8fca6c3aa8 upstream.

We'll end up with debugfs collisions if we don't give names to the
regmaps created by this driver. Change the name of the config before
registering it so we don't collide in debugfs.

Fixes: 7f9c136216c7 ("soc: qcom: Add broadcast base for Last Level Cache Controller (LLCC)")
Cc: Venkata Narendra Kumar Gutta 
Reviewed-by: Evan Green 
Signed-off-by: Stephen Boyd 
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-09-16T22:52:38+00:00

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...