Pull SoC driver updates from Arnd Bergmann:
 "Updates are across the usual driver subsystems with SoC specific
  drivers:

   - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
     sm8750, and amlogic c3 and s4 chips.

   - cache controller updates for sifive chips, plus binding changes for
     other cache descriptions.

   - memory controller drivers for mediatek mt6893, stm32 and cleanups
     for a few more drivers

   - reset controller drivers for T-Head TH1502, Sophgo sg2044 and
     Renesas RZ/V2H(P)

   - SCMI firmware updates to better deal with buggy firmware, plus
     better support for Qualcomm X1E and NXP i.MX specific interfaces

   - a new platform driver for the crypto firmware on Cznic Turris
     Omnia/MOX

   - cleanups for the TEE firmware subsystem and amdtee driver

   - minor updates and fixes for freescale/nxp, qualcomm, google,
     aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
     broadcom and samsung SoCs"

* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
  soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
  soc: aspeed: lpc: Fix impossible judgment condition
  ARM: aspeed: Don't select SRAM
  docs: firmware: qcom_scm: Fix kernel-doc warning
  soc: fsl: qe: Consolidate chained IRQ handler install/remove
  firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
  dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
  dt-bindings: cache: add QiLai compatible to ax45mp
  memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
  dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
  dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
  soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
  MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
  dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
  dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
  bus: fsl-mc: Use strscpy() instead of strscpy_pad()
  soc: fsl: qbman: Remove const from portal->cgrs allocation type
  bus: fsl_mc: Fix driver_managed_dma check
  bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
  bus: fsl-mc: drop useless cleanup
  ...

FSL SOC Changes for 6.16:
  - Various fixes and cleanups from Ioana on fsl-mc bus driver
  - Other misc fixes on fsl-mc bus driver
  - A build fix on DPAA2 driver
  - Some preparation work from Kees on qbman driver
  - Some cleanup on FSL qe interrupt driver init

* tag 'soc_fsl-6.16-1' of https://github.com/chleroy/linux:
  soc: fsl: qe: Consolidate chained IRQ handler install/remove
  bus: fsl-mc: Use strscpy() instead of strscpy_pad()
  soc: fsl: qbman: Remove const from portal->cgrs allocation type
  bus: fsl_mc: Fix driver_managed_dma check
  bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
  bus: fsl-mc: drop useless cleanup
  bus: fsl-mc: add the dprc_get_mem() command to the whitelist
  bus: fsl-mc: fix GET/SET_TAILDROP command ids
  bus: fsl-mc: do not add a device-link for the UAPI used DPMCP device
  bus: fsl-mc: fix double-free on mc_dev
  soc: fsl: Do not enable DPAA2_CONSOLE by default during compile testing

Link: https://lore.kernel.org/r/9e5b3e8e-3280-4ff9-915b-9a8b934bac22@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Chained irq handlers usually set up handler data as well.
irq_set_chained_handler_and_data() can set both under irq_desc->lock.
Replace the two calls with one.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250515083919.3811473-1-nichen@iscas.ac.cn
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.

Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For soc/fsl
Link: https://lore.kernel.org/all/20250319092951.37667-35-jirislaby@kernel.org

In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)

The assigned type is "struct qman_cgrs *", but the returned type,
while technically matching, is const qualified. As there is no general
way to remove const qualifiers, adjust the allocation type to match
the assignment.

Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250426062040.work.047-kees@kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

Enabling the compile test should not cause automatic enabling of such
drivers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250404112407.255126-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

clang with W=1 reports
drivers/soc/fsl/qe/qe_ic.c:235:29: error: unused function  'qe_ic_from_irq' [-Werror,-Wunused-function]

The use of this function was removed with
commit d7c2878cfcfa ("soc: fsl: qe: remove unused qe_ic_set_* functions")

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230320125202.1721775-1-trix@redhat.com
Link: https://lore.kernel.org/all/1619002613-18216-1-git-send-email-jiapeng.chong@linux.alibaba.com/
[krzk: Adjust commit msg]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20250319092951.37667-49-jirislaby@kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

Use the proper API instead of open coding it.

However it looks like kthreads here could be replaced by the use of a
per-cpu workqueue instead.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>

Pull networking updates from Paolo Abeni:
 "The most significant set of changes is the per netns RTNL. The new
  behavior is disabled by default, regression risk should be contained.

  Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
  default value from PTP_1588_CLOCK_KVM, as the first is intended to be
  a more reliable replacement for the latter.

  Core:

   - Started a very large, in-progress, effort to make the RTNL lock
     scope per network-namespace, thus reducing the lock contention
     significantly in the containerized use-case, comprising:
       - RCU-ified some relevant slices of the FIB control path
       - introduce basic per netns locking helpers
       - namespacified the IPv4 address hash table
       - remove rtnl_register{,_module}() in favour of
         rtnl_register_many()
       - refactor rtnl_{new,del,set}link() moving as much validation as
         possible out of RTNL lock
       - convert all phonet doit() and dumpit() handlers to RCU
       - convert IPv4 addresses manipulation to per-netns RTNL
       - convert virtual interface creation to per-netns RTNL
     the per-netns lock infrastructure is guarded by the
     CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

   - Introduce NAPI suspension, to efficiently switching between busy
     polling (NAPI processing suspended) and normal processing.

   - Migrate the IPv4 routing input, output and control path from direct
     ToS usage to DSCP macros. This is a work in progress to make ECN
     handling consistent and reliable.

   - Add drop reasons support to the IPv4 rotue input path, allowing
     better introspection in case of packets drop.

   - Make FIB seqnum lockless, dropping RTNL protection for read access.

   - Make inet{,v6} addresses hashing less predicable.

   - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
     and timestamps

  Things we sprinkled into general kernel code:

   - Add small file operations for debugfs, to reduce the struct ops
     size.

   - Refactoring and optimization for the implementation of page_frag
     API, This is a preparatory work to consolidate the page_frag
     implementation.

  Netfilter:

   - Optimize set element transactions to reduce memory consumption

   - Extended netlink error reporting for attribute parser failure.

   - Make legacy xtables configs user selectable, giving users the
     option to configure iptables without enabling any other config.

   - Address a lot of false-positive RCU issues, pointed by recent CI
     improvements.

  BPF:

   - Put xsk sockets on a struct diet and add various cleanups. Overall,
     this helps to bump performance by 12% for some workloads.

   - Extend BPF selftests to increase coverage of XDP features in
     combination with BPF cpumap.

   - Optimize and homogenize bpf_csum_diff helper for all archs and also
     add a batch of new BPF selftests for it.

   - Extend netkit with an option to delegate skb->{mark,priority}
     scrubbing to its BPF program.

   - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
     programs.

  Protocols:

   - Introduces 4-tuple hash for connected udp sockets, speeding-up
     significantly connected sockets lookup.

   - Add a fastpath for some TCP timers that usually expires after
     close, the socket lock contention.

   - Add inbound and outbound xfrm state caches to speed up state
     lookups.

   - Avoid sending MPTCP advertisements on stale subflows, reducing
     risks on loosing them.

   - Make neighbours table flushing more scalable, maintaining per
     device neigh lists.

  Driver API:

   - Introduce a unified interface to configure transmission H/W
     shaping, and expose it to user-space via generic-netlink.

   - Add support for per-NAPI config via netlink. This makes napi
     configuration persistent across queues removal and re-creation.
     Requires driver updates, currently supported drivers are:
     nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

   - Add ethtool support for writing SFP / PHY firmware blocks.

   - Track RSS context allocation from ethtool core.

   - Implement support for mirroring to DSA CPU port, via TC mirror
     offload.

   - Consolidate FDB updates notification, to avoid duplicates on
     device-specific entries.

   - Expose DPLL clock quality level to the user-space.

   - Support master-slave PHY config via device tree.

  Tests and tooling:

   - forwarding: introduce deferred commands, to simplify the cleanup
     phase

  Drivers:

   - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
     Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
     IRQs and queues to NAPI IDs, allowing busy polling and better
     introspection.

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - mlx5:
           - a large refactor to implement support for cross E-Switch
             scheduling
           - refactor H/W conter management to let it scale better
           - H/W GRO cleanups
      - Intel (100G, ice)::
         - add support for ethtool reset
         - implement support for per TX queue H/W shaping
      - AMD/Solarflare:
         - implement per device queue stats support
      - Broadcom (bnxt):
         - improve wildcard l4proto on IPv4/IPv6 ntuple rules
      - Marvell Octeon:
         - Add representor support for each Resource Virtualization Unit
           (RVU) device.
      - Hisilicon:
         - add support for the BMC Gigabit Ethernet
      - IBM (EMAC):
         - driver cleanup and modernization
      - Cisco (VIC):
         - raise the queues number limit to 256

   - Ethernet virtual:
      - Google vNIC:
         - implement page pool support
      - macsec:
         - inherit lower device's features and TSO limits when
           offloading
      - virtio_net:
         - enable premapped mode by default
         - support for XDP socket(AF_XDP) zerocopy TX
      - wireguard:
         - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
           packets.

   - Ethernet NICs embedded and virtual:
      - Broadcom ASP:
         - enable software timestamping
      - Freescale:
         - add enetc4 PF driver
      - MediaTek: Airoha SoC:
         - implement BQL support
      - RealTek r8169:
         - enable TSO by default on r8168/r8125
         - implement extended ethtool stats
      - Renesas AVB:
         - enable TX checksum offload
      - Synopsys (stmmac):
         - support header splitting for vlan tagged packets
         - move common code for DWMAC4 and DWXGMAC into a separate FPE
           module.
         - add dwmac driver support for T-HEAD TH1520 SoC
      - Synopsys (xpcs):
         - driver refactor and cleanup
      - TI:
         - icssg_prueth: add VLAN offload support
      - Xilinx emaclite:
         - add clock support

   - Ethernet switches:
      - Microchip:
         - implement support for the lan969x Ethernet switch family
         - add LAN9646 switch support to KSZ DSA driver

   - Ethernet PHYs:
      - Marvel: 88q2x: enable auto negotiation
      - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

   - PTP:
      - Add support for the Amazon virtual clock device
      - Add PtP driver for s390 clocks

   - WiFi:
      - mac80211
         - EHT 1024 aggregation size for transmissions
         - new operation to indicate that a new interface is to be added
         - support radio separation of multi-band devices
         - move wireless extension spy implementation to libiw
      - Broadcom:
         - brcmfmac: optional LPO clock support
      - Microchip:
         - add support for Atmel WILC3000
      - Qualcomm (ath12k):
         - firmware coredump collection support
         - add debugfs support for a multitude of statistics
      - Qualcomm (ath5k):
         -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
      - Realtek:
         - rtw88: 8821au and 8812au USB adapters support
         - rtw89: add thermal protection
         - rtw89: fine tune BT-coexsitence to improve user experience
         - rtw89: firmware secure boot for WiFi 6 chip

   - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
  mm: page_frag: fix a compile error when kernel is not compiled
  Documentation: tipc: fix formatting issue in tipc.rst
  selftests: nic_performance: Add selftest for performance of NIC driver
  selftests: nic_link_layer: Add selftest case for speed and duplex states
  selftests: nic_link_layer: Add link layer selftest for NIC driver
  bnxt_en: Add FW trace coredump segments to the coredump
  bnxt_en: Add a new ethtool -W dump flag
  bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
  bnxt_en: Add functions to copy host context memory
  bnxt_en: Do not free FW log context memory
  bnxt_en: Manage the FW trace context memory
  bnxt_en: Allocate backing store memory for FW trace logs
  bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
  bnxt_en: Refactor bnxt_free_ctx_mem()
  bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
  bnxt_en: Update firmware interface spec to 1.10.3.85
  selftests/bpf: Add some tests with sockmap SK_PASS
  bpf: fix recursive lock when verdict program return SK_PASS
  wireguard: device: support big tcp GSO
  wireguard: selftests: load nf_conntrack if not present
  ...