Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...

To simplify machine init and as the soc_device struct is not used as the
parent for on-chip devices anymore, move SoC detection to its own driver.

Change in dmesg:
 - before:
DMA: preallocated 256 KiB pool for atomic coherent allocations
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27, revision 0
No ATAGs?
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe085b000
SCSI subsystem initialized

 - after:
DMA: preallocated 256 KiB pool for atomic coherent allocations
No ATAGs?
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe0859000
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27, revision 0
SCSI subsystem initialized

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This is an almost complete re-write of the previous GPC power gating control
code found in the IMX architecture code. It supports both the old and the new
DT binding, allowing more domains to be added later and generally makes the
driver easier to extend, while keeping compatibility with existing DTBs.

As the result, all functionality regarding the power gating controller
gets removed from the IMX architecture GPC driver.  It keeps only the
IRQ controller code in the architecture, as this is closely coupled to
the CPU idle implementation.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The ARMv8 zx2967 family (296718, 296716 etc) uses different value
for controlling the power domain on/off registers, Choose the
value depending on the compatible.

Multiple domains are prepared for the family, this patch prepares
the common functions.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge "Ux500 cleanups from Arnd" from Linus Walleij:

This is a set of cleanups for the Ux500 that reduce the number
of machine-local files and boardfile-type data for regulators
and ASoC.

* tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data

As the ux500 id code is basically a standalone driver, we can move it
out of the arch code into drivers/soc/ux500.

This is a user-visible change, as it moves all the devices in sysfs
from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a
separate device.

Originally the idea was to put all on-chip devices under the soc node,
and ux500 was the first platform to have this device, but later platforms
almost all didn't follow that pattern, so this makes the platform do
the same thing as everyone else.

Since the platform is really obsolete now, I am optimistic that nothing
will break after moving the devices around.

As the SoC driver no longer has access to the private header files,
I'm changing the code to instead look up the address of the backupram
from devicetree, which is a good idea anyway.

Finally, having a separate Kconfig symbol means the driver is now
optional and could even be a loadable module rather than always being
built-in if we allowed that for soc_device.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixup mising Makefile, fixup BB_UID_BASE to fc0]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Unify the different Broadcom SoCs directory and have everybody live
under drivers/soc/bcm/*.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Move the pm-rcar driver from arch/arm/mach-shmobile/ to
drivers/soc/renesas/, and its header file to include/linux/soc/renesas/,
so it can be shared between arm32 (R-Car H1 and Gen2) and arm64 (R-Car
Gen3). Rename it to rcar-sysc as it's really a driver for the R-Car
System Controller (SYSC).

Kill the intermediate PM_RCAR config symbol, as it's not user
configurable anymore, and to prepare for SoC-specific make rules.

Add the missing #include <linux/types.h> to rcar-sysc.h, which was
exposed by different include order.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
to "drivers/soc/samsung". This driver is mainly used for setting misc
bits of register from PMU IP of Exynos SoC which will be required to
configure before Suspend/Resume. Currently all these settings are done
in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
support, there is a need of this PMU driver in driver/* folder.

This driver uses existing DT binding information and there should
be no functionality change in the supported platforms.

Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com>
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)]
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Rebased, add necessary infrastructure for building and
selecting drivers/soc because original patchset was on top of movement
SROMc to drivers/soc]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.  Some for SoC-family code under
  drivers/soc, but also some other driver updates that don't belong
  anywhere else.  We also bring in the drivers/reset code through
  arm-soc.

  Some of the larger updates:

   - Qualcomm support for SMEM, SMSM, SMP2P.  All used to communicate
     with other parts of the chip/board on these platforms, all
     proprietary protocols that don't fit into other subsystems and live
     in drivers/soc for now.

   - System bus driver for UniPhier

   - Driver for the TI Wakeup M3 IPC device

   - Power management for Raspberry PI

  + Again a bunch of other smaller updates and patches"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: uniphier: allow only built-in driver
  ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
  MAINTAINERS: Drop Kumar Gala from QCOM
  bus: uniphier-system-bus: add UniPhier System Bus driver
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Define two new packets from the latest firmware.
  drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
  soc: mediatek: SCPSYS: Add regulator support
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  memory/tegra: Add number of TLB lines for Tegra124
  reset: hi6220: fix modular build
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  ...