Implements genpd and reset providers for downstream devices. Each
instance of the driver binds to a single register and represents a
single SoC power domain.

The driver does not currently implement all features (clockgate-only
state, misc flags), but we declare the respective registers for
documentation purposes. These features will be added as they become
useful for downstream devices.

This also creates the apple/soc tree and Kconfig submenu.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>

Randconfig builds on the ixp4xx ethernet driver showed that the qmgr and
npe drivers are not actually built even when compile testing is enabled:

ERROR: modpost: "qmgr_stat_empty" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_enable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_set_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "__qmgr_request_queue" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_send_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_load_firmware" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_running" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_disable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_stat_below_low_watermark" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!

Fix it by always entering the drivers/soc/ixp4xx/ directory, and fix the
resulting compile test failures by removing the #include statements
that prevent building on most other platforms.

Fixes: 7a6c9dbb36a4 ("soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST")
Fixes: fcf2d8978cd5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210721211412.3537004-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...

The rest of these are alphabetically sorted, and leaving it this way
causes a merge conflict.

Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.

However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.

Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.

Thanks to Jun and Shawn for maintaining this platform over the past
five years.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Rename configuration options and directories related to the Kendryte
K210 SoC to use the SoC vendor name (canaan) instead of the "kendryte"
branding name.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull OpenRISC updates from Stafford Horne:

 - New drivers and OpenRISC support for the LiteX platform

 - A bug fix to support userspace gdb debugging

 - Fixes one compile issue with blk-iocost

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: add local64.h to fix blk-iocost build
  openrisc: fix trap for debugger breakpoint signalling
  openrisc: add support for LiteX
  drivers/tty/serial: add LiteUART driver
  dt-bindings: serial: document LiteUART bindings
  drivers/soc/litex: add LiteX SoC Controller driver
  dt-bindings: soc: document LiteX SoC Controller bindings
  dt-bindings: vendor: add vendor prefix for LiteX

This commit adds driver for the FPGA-based LiteX SoC
Controller from LiteX SoC builder.

Co-developed-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Reword the kconfig text to be consistent and reflect that most drivers
are available for all supported ASPEED chips (2400, 2500 and 2600).

Rearrange the symbols the SoC drivers depend on so the menu doesn't
appear unless you are building for ASPEED for compile testing.

The SYSCON_MFD and REGMAP options are usually selected by drivers that
need them, so do this.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200916125731.784527-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>

Pull RISC-V updates from Palmer Dabbelt:
 "This contains a handful of new features:

   - Partial support for the Kendryte K210.

     There are still a few outstanding issues that I have patches for,
     but I don't actually have a board to test them so they're not
     included yet.

   - SBI v0.2 support.

   - Fixes to support for building with LLVM-based toolchains. The
     resulting images are known not to boot yet.

  I don't anticipate a part two, but I'll probably have something early
  in the RCs to finish up the K210 support"

* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
  riscv: create a loader.bin boot image for Kendryte SoC
  riscv: Kendryte K210 default config
  riscv: Add Kendryte K210 device tree
  riscv: Select required drivers for Kendryte SOC
  riscv: Add Kendryte K210 SoC support
  riscv: Add SOC early init support
  riscv: Unaligned load/store handling for M_MODE
  RISC-V: Support cpu hotplug
  RISC-V: Add supported for ordered booting method using HSM
  RISC-V: Add SBI HSM extension definitions
  RISC-V: Export SBI error to linux error mapping function
  RISC-V: Add cpu_ops and modify default booting method
  RISC-V: Move relocate and few other functions out of __init
  RISC-V: Implement new SBI v0.2 extensions
  RISC-V: Introduce a new config for SBI v0.1
  RISC-V: Add SBI v0.2 extension definitions
  RISC-V: Add basic support for SBI v0.2
  RISC-V: Mark existing SBI as 0.1 SBI.
  riscv: Use macro definition instead of magic number
  riscv: Add support to dump the kernel page tables
  ...