linux-stable.git/drivers/slimbus, branch linux-5.14.y

slimbus: ngd: reset dma setup during runtime pm

2021-08-13T08:22:30+00:00

During suspend/resume NGD remote instance is power cycled along
with remotely controlled bam dma engine.
So Reset the dma configuration during this suspend resume path
so that we are not dealing with any stale dma setup.

Without this transactions timeout after first suspend resume path.

Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20210809082428.11236-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: ngd: set correct device for pm

2021-08-13T08:22:30+00:00

For some reason we ended up using wrong device in some places for pm_runtime calls.
Fix this so that NGG driver can do runtime pm correctly.

Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20210809082428.11236-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: messaging: check for valid transaction id

2021-08-13T08:22:30+00:00

In some usecases transaction ids are dynamically allocated inside
the controller driver after sending the messages which have generic
acknowledge responses. So check for this before refcounting pm_runtime.

Without this we would end up imbalancing runtime pm count by
doing pm_runtime_put() in both slim_do_transfer() and slim_msg_response()
for a single  pm_runtime_get() in slim_do_transfer()

Fixes: d3062a210930 ("slimbus: messaging: add slim_alloc/free_txn_tid()")
Cc: 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20210809082428.11236-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: messaging: start transaction ids from 1 instead of zero

2021-08-13T08:22:30+00:00

As tid is unsigned its hard to figure out if the tid is valid or
invalid. So Start the transaction ids from 1 instead of zero
so that we could differentiate between a valid tid and invalid tids

This is useful in cases where controller would add a tid for controller
specific transfers.

Fixes: d3062a210930 ("slimbus: messaging: add slim_alloc/free_txn_tid()")
Cc: 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20210809082428.11236-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()

2020-12-10T15:23:56+00:00

platform_get_resource_byname() may fail and in this case a NULL
dereference will occur.

Fix it to use devm_platform_ioremap_resource_byname() instead of calling
platform_get_resource_byname() and devm_ioremap().

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t,
n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: ad7fcbc308b0 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1607392473-20610-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd-ctrl: fix SSR dependencies

2020-12-09T18:57:03+00:00

NGD should depend on QCOM_RPROC_COMMON instead of selecting it, as
this will be selected by respective remoteproc driver.

Reported-by: kernel test robot 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20201201093843.20126-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd-ctrl: remove redundant out of memory messages

2020-11-27T15:03:43+00:00

Failure of dma_alloc_coherent will already throw a error message,
so addition message is really redundant here. Remove it!

Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20201127102451.17114-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd-ctrl: Avoid sending power requests without QMI

2020-11-27T15:03:43+00:00

Attempting to send a power request during PM operations, when the QMI
handle isn't initialized results in a NULL pointer dereference. So check
if the QMI handle has been initialized before attempting to post the
power requests.

Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Bjorn Andersson 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20201127102451.17114-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd-ctrl: Constify static structs

2020-11-27T15:03:43+00:00

qcom_slim_qmi_msg_handlers[] and qcom_slim_ngd_qmi_svc_event_ops are
only used as input arguments to qmi_handle_init() which accepts const
pointers to both qmi_ops and qmi_msg_handler. Make them const to allow
the compiler to put them in read-only memory.

Signed-off-by: Rikard Falkeborn 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20201127102451.17114-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

slimbus: messaging: Fix fall-through warnings for Clang

2020-11-27T15:03:43+00:00

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Srinivas Kandagatla 
Link: https://lore.kernel.org/r/20201127102451.17114-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman