linux-stable.git/drivers/serial/serial_core.c, branch linux-2.6.28.y

drivers/serial: use nr_irqs

2008-10-16T14:52:06+00:00

Signed-off-by: Yinghai Lu 
Signed-off-by: Ingo Molnar

serial: fix device name reporting when minor space is shared between drivers

2008-10-13T16:51:44+00:00

The multiple drivers share the minor space occupied by a particular major
number, the actual index within the device name's space is indicated by
the tty_driver->name_base + uart_port->line

Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line

Use those to print the device names properly in such situations in
serial_core.c and 8250.c

Signed-off-by: David S. Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

serial-make-uart_ports-ioport-unsigned-long-fix

2008-10-13T16:51:39+00:00

Signed-off-by: Andrew Morton 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

tty: rework break handling

2008-07-22T20:03:28+00:00

Some hardware needs to do break handling itself and may have partial
support only. Make break_ctl return an error code. Add a tty driver flag
so you can indicate driver hardware side break support.

Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

serial: use tty_port

2008-07-21T00:12:35+00:00

Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.

Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops

2008-07-21T00:12:34+00:00

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.

Signed-off-by: Haavard Skinnemoen 
Acked-by: Alan Cox 
Signed-off-by: Linus Torvalds

serial: fix serial_match_port() for dynamic major tty-device numbers

2008-07-04T17:40:04+00:00

As reported by Vipul Gandhi, the current serial_match_port() doesn't work
for tty-devices using dynamic major number allocation.  Fix it.

It oopses if you suspend a serial port with _dynamic_ major number.  ATM,
I think, there's only the drivers/serial/jsm/jsm_driver.c driver, that
does it in-tree.

Signed-off-by: Guennadi Liakhovetski 
Tested-by: Vipul Gandhi 
Cc: Alan Cox 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Fix uart_set_ldisc() function type

2008-06-04T17:35:03+00:00

Commit 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 ("serial_core:
uart_set_ldisc infrastructure") introduced the ability for low-level
serial drivers to be informed when the tty ldisc changes.

However, the actual tty-layer function that does this callback for
serial devices was declared with the wrong type, having a spurious and
unused 'ldisc' argument.

This fixed the resulting compiler warning by just removing it.

Acked-by: Blithering Idiot 
Signed-off-by: Linus Torvalds

serial_core: uart_set_ldisc infrastructure

2008-06-03T15:20:17+00:00

The tty layer provides a callback that is used when the line discipline
is changed. Some hardware uses this to configure hardware specific
features such as IrDA mode on serial ports. Unfortunately the serial
layer does not provide this feature or pass it down to drivers.

Blackfin used to hack around this by rewriting the tty ops, but those are
now properly shared and const so the hack fails. Instead provide the
proper operations.

This change plus a follow up from the Blackfin guys is needed to avoid
blackfin losing features in this release.

Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

serial: fix enable_irq_wake/disable_irq_wake imbalance in serial_core.c

2008-05-24T16:56:11+00:00

enable_irq_wake() and disable_irq_wake() need to be balanced.  However,
serial_core.c calls these for different conditions during the suspend and
resume functions...

This is causing a regular WARN_ON() as found at
http://www.kerneloops.org/search.php?search=set_irq_wake

This patch makes the conditions for triggering the _wake enable/disable
sequence identical.

Signed-off-by: Arjan van de Ven 
Cc: Alan Cox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds