linux-stable.git/drivers/serial/Kconfig, branch linux-2.6.36.y

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2010-08-11T16:13:19+00:00

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits)
  ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}
  ARM: 6324/1: cam60: move cam60_spi_devices to .init.data
  ARM: 6322/1: imx/pca100: Fix name of spi platform data
  ARM: 6321/1: fix syntax error in main Kconfig file
  ARM: 6297/1: move U300 timer to dynamic clock lookup
  ARM: 6296/1: clock U300 intcon and timer properly
  ARM: 6295/1: fix U300 apb_pclk split
  ARM: 6306/1: fix inverted MMC card detect in U300
  ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID
  ARM: 6294/1: etm: do a dummy read from OSSRR during initialization
  ARM: 6292/1: coresight: add ETM management registers
  ARM: 6288/1: ftrace: document mcount formats
  ARM: 6287/1: ftrace: clean up mcount assembly indentation
  ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"
  ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE
  ARM: 6280/1: imx: Fix build failure when including  without 
  ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3
  ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig
  ARM: S5PV210: Override FIMC driver name on Aquila board
  ARM: S5PC100: enable FIMC on SMDKC100
  ...

Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to
different subsystem 'setname' calls, and trivial port types in
include/linux/serial_core.h

hsu: driver for Medfield High Speed UART device

2010-08-10T20:47:46+00:00

This is a PCI & UART driver, which suppors both PIO and DMA mode
UART operation. It has 3 identical UART ports and one internal
DMA controller.

Current FW will export 4 pci devices for hsu: 3 uart ports and 1
dma controller, each has one IRQ line. And we need to discuss the
device model, one PCI device covering whole HSU should be a better
model, but there is a problem of how to export the 4 IRQs info

Current driver set the highest baud rate to 2746800bps, which is
easy to scale down to 115200/230400.... To suport higher baud rate,
we need add special process, change DLAB/DLH/PS/DIV/MUL registers
all together.

921600 is the highest baud rate that has been tested with Bluetooth
modem connected to HSU port 0. Will test more when there is right
BT firmware.

Current version contains several work around for A0's Silicon bugs

Signed-off-by: Feng Tang 
Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

serial: max3107: Abstract out the platform specific bits

2010-08-10T20:47:44+00:00

At the moment there is only one platform type supported and there is is
hard wired, but with these changes the infrastructure is now there for
anyone else to provide methods for their hardware.

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

serial: max3107: introduce a max3107 driver

2010-08-10T20:47:44+00:00

This device is used by some of the Intel MID platforms. It's not similar
enough to the MAX3100 to use the same driver.

At this point the driver is specific to the platform and not generalised.
We will fix that later.

Signed-off-by: jianwei.yang 
Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

mrst_max3110: add UART driver for Max3110 on Moorestown

2010-08-10T20:47:39+00:00

This driver enable the max3110 device, it can be used as
a system console. the IRQ needs be enabled if user want a
better performance. MRST max3110 works in 3.684MHz clock,
which supports 230400 as its maximum rate.

Signed-off-by: Feng Tang 
Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

2010-08-09T13:07:19+00:00

Conflicts:
	arch/arm/Kconfig

SERIAL: 8250: Remove SERIAL_8250_AU1X00

2010-08-05T12:26:07+00:00

Remove the SERIAL_8250_AU1X00 config symbol.  Instead, use the MIPS_ALCHEMY
one which is always defined when building an Au1x00-based platform.

Signed-off-by: Manuel Lauss 
To: Linux-MIPS 
Cc: Linux-serial 
Patchwork: https://patchwork.linux-mips.org/patch/1461/
Signed-off-by: Ralf Baechle 

This one depends on a previous patch (which removes SOC_AU1X00 and changes
MACH_ALCHEMY) to apply cleanly (and then actually work), so I'd love for
this to go in via the mips tree.

MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY

2010-08-05T12:26:06+00:00

Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done
by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY.

Signed-off-by: Manuel Lauss 
To: Linux-MIPS 
Patchwork: https://patchwork.linux-mips.org/patch/1461/
Signed-off-by: Ralf Baechle

ARM: S5PV310: Add serial port support

2010-08-05T09:32:42+00:00

This patch adds UART serial port support for S5PV310.
In the case of that serial device has just one clock source, driver can not
control clock source. So add check function in get_clksrc and set_clksrc.

Signed-off-by: Jongpill Lee 
Acked-by: Changhwan Youn 
Signed-off-by: Kukjin Kim

serial: Add driver for the Altera UART

2010-05-21T16:34:30+00:00

Add an UART driver for the UART component available as a SOPC (System on
Programmable Chip) component for Altera FPGAs.

Signed-off-by: Tobias Klauser 
Signed-off-by: Greg Kroah-Hartman