Pull block fix from Jens Axboe:
 "Unfortunately this weekend we had a few last minute reports, one was
  for block.

  The partition disable for zoned devices was overly restrictive, it can
  work (and be supported) just fine for host-aware variants.

  Here's a fix ensuring that's the case so we don't break existing users
  of that"

* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
  block: allow partitions on host aware zone devices

Pull SCSI fixes from James Bottomley:
 "Two last minute fixes, both in drivers.

  The fnic one is a highly unlikely condition, but the RDMA one is a
  recently introduced regression that causes a kernel warning to trigger
  in every RDMA logon, which would be unsightly if it got into the final
  release"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: RDMA/isert: Fix a recently introduced regression related to logout
  scsi: fnic: do not queue commands during fwreset

Host-aware SMR drives can be used with the commands to explicitly manage
zone state, but they can also be used as normal disks.  In the former
case it makes perfect sense to allow partitions on them, in the latter
it does not, just like for host managed devices.  Add a check to
add_partition to allow partitions on host aware devices, but give
up any zone management capabilities in that case, which also catches
the previously missed case of adding a partition vs just scanning it.

Because sd can rescan the attribute at runtime it needs to check if
a disk has partitions, for which a new helper is added to genhd.h.

Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When a link is going down the driver will be calling fnic_cleanup_io(),
which will traverse all commands and calling 'done' for each found command.
While the traversal is handled under the host_lock, calling 'done' happens
after the host_lock is being dropped.

As fnic_queuecommand_lck() is being called with the host_lock held, it
might well be that it will pick the command being selected for abortion
from the above routine and enqueue it for sending, but then 'done' is being
called on that very command from the above routine.

Which of course confuses the hell out of the scsi midlayer.

So fix this by not queueing commands when fnic_cleanup_io is active.

Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull SCSI fixes from James Bottomley:
 "Three fixes in drivers with no impact to core code.

  The mptfusion fix is enormous because the driver API had to be
  rethreaded to pass down the necessary iocp pointer, but once that's
  done a significant chunk of code is deleted.

  The other two patches are small"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mptfusion: Fix double fetch bug in ioctl
  scsi: storvsc: Correctly set number of hardware queues for IDE disk
  scsi: fnic: fix invalid stack access

Commit 0ed881027690 ("scsi: storvsc: setup 1:1 mapping between hardware
queue and CPU queue") introduced a regression for disks attached to
IDE. For these disks the host VSP only offers one VMBUS channel. Setting
multiple queues can overload the VMBUS channel and result in performance
drop for high queue depth workload on system with large number of CPUs.

Fix it by leaving the number of hardware queues to 1 (default value) for
IDE disks.

Fixes: 0ed881027690 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue")
Link: https://lore.kernel.org/r/1578960516-108228-1-git-send-email-longli@linuxonhyperv.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

gcc -O3 warns that some local variables are not properly initialized:

drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[0] = *a0;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
  u64 a0, a1;
      ^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~

Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.

Use an array of two u64 variables where needed to make it work correctly.

I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.

Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull SCSI fixes from James Bottomley:
 "Two simple fixes in the upper drivers (so both fairly core), one in
  enclosures, which fixes replugging a device into an enclosure slot and
  one in the disk driver which fixes revalidating a drive with
  protection information (PI) to make it a non-PI drive ... previously
  we were still remembering the old PI state.

  Both fixed issues are quite rare in the field"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: enclosure: Fix stale device oops with hot replug
  scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI

If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.

Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).

[mkp: commit desc]

Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull SCSI fixes from James Bottomley:
 "Four fixes and one spelling update, all in drivers: two in lpfc and
  the rest in mp3sas, cxgbi and target"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target/iblock: Fix protection error with blocks greater than 512B
  scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()
  scsi: lpfc: fix spelling mistakes of asynchronous
  scsi: lpfc: fix build failure with DEBUGFS disabled
  scsi: mpt3sas: Fix double free in attach error handling