linux-stable.git/drivers/scsi, branch v5.4.277

scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload

2024-05-17T09:43:50+00:00

[ Upstream commit c214ed2a4dda35b308b0b28eed804d7ae66401f9 ]

The session resources are used by FW and driver when session is offloaded,
once session is uploaded these resources are not used. The lock is not
required as these fields won't be used any longer. The offload and upload
calls are sequential, hence lock is not required.

This will suppress following BUG_ON():

[  449.843143] ------------[ cut here ]------------
[  449.848302] kernel BUG at mm/vmalloc.c:2727!
[  449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1
Rebooting.
[  449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016
[  449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc]
[  449.882910] RIP: 0010:vunmap+0x2e/0x30
[  449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41
[  449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206
[  449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005
[  449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000
[  449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf
[  449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000
[  449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0
[  449.953701] FS:  0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000
[  449.962732] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0
[  449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  449.993028] Call Trace:
[  449.995756]  __iommu_dma_free+0x96/0x100
[  450.000139]  bnx2fc_free_session_resc+0x67/0x240 [bnx2fc]
[  450.006171]  bnx2fc_upload_session+0xce/0x100 [bnx2fc]
[  450.011910]  bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc]
[  450.018136]  fc_rport_work+0x103/0x5b0 [libfc]
[  450.023103]  process_one_work+0x1e8/0x3c0
[  450.027581]  worker_thread+0x50/0x3b0
[  450.031669]  ? rescuer_thread+0x370/0x370
[  450.036143]  kthread+0x149/0x170
[  450.039744]  ? set_kthread_struct+0x40/0x40
[  450.044411]  ret_from_fork+0x22/0x30
[  450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls
[  450.048497]  libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler
[  450.159753] ---[ end trace 712de2c57c64abc8 ]---

Reported-by: Guangwu Zhang 
Signed-off-by: Saurav Kashyap 
Signed-off-by: Nilesh Javali 
Link: https://lore.kernel.org/r/20240315071427.31842-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic

2024-05-17T09:43:50+00:00

[ Upstream commit bb011631435c705cdeddca68d5c85fd40a4320f9 ]

Typically when an out of resource CQE status is detected, the
lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by
reducing an sdev's queue_depth.

However, the current lpfc_rampdown_queue_depth() logic does not help reduce
queue_depth.  num_cmd_success is never updated and is always zero, which
means new_queue_depth will always be set to sdev->queue_depth.  So,
new_queue_depth = sdev->queue_depth - new_queue_depth always sets
new_queue_depth to zero.  And, scsi_change_queue_depth(sdev, 0) is
essentially a no-op.

Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth
equal to sdev->queue_depth subtracted from number of times num_rsrc_err was
incremented.  If num_rsrc_err is >= sdev->queue_depth, then set
new_queue_depth equal to 1.  Eventually, the frequency of Good_Status
frames will signal SCSI upper layer to auto increase the queue_depth back
to the driver default of 64 via scsi_handle_queue_ramp_up().

Signed-off-by: Justin Tee 
Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc()

2024-04-13T10:51:38+00:00

[ Upstream commit 2ae917d4bcab80ab304b774d492e2fcd6c52c06b ]

The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an
unsuccessful status.  In such cases, the elsiocb is not issued, the
completion is not called, and thus the elsiocb resource is leaked.

Check return value after calling lpfc_sli4_resume_rpi() and conditionally
release the elsiocb resource.

Signed-off-by: Justin Tee 
Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: mylex: Fix sysfs buffer lengths

2024-04-13T10:51:36+00:00

[ Upstream commit 1197c5b2099f716b3de327437fb50900a0b936c9 ]

The myrb and myrs drivers use an odd way of implementing their sysfs files,
calling snprintf() with a fixed length of 32 bytes to print into a page
sized buffer. One of the strings is actually longer than 32 bytes, which
clang can warn about:

drivers/scsi/myrb.c:1906:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
drivers/scsi/myrs.c:1089:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]

These could all be plain sprintf() without a length as the buffer is always
long enough. On the other hand, sysfs files should not be overly long
either, so just double the length to make sure the longest strings don't
get truncated here.

Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)")
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20240326223825.4084412-8-arnd@kernel.org
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Correct size for wqe for memset()

2024-04-13T10:51:32+00:00

commit 28d41991182c210ec1654f8af2e140ef4cc73f20 upstream.

The wqe is of type lpfc_wqe128. It should be memset with the same type.

Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context")
Signed-off-by: Muhammad Usama Anjum 
Link: https://lore.kernel.org/r/20240304090649.833953-1-usama.anjum@collabora.com
Reviewed-by: AngeloGioacchino Del Regno 
Reviewed-by: Justin Tee 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix command flush on cable pull

2024-04-13T10:51:32+00:00

commit a27d4d0e7de305def8a5098a614053be208d1aa1 upstream.

System crash due to command failed to flush back to SCSI layer.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-372.9.1.el8.x86_64 #1
 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
 RIP: 0010:__wake_up_common+0x4c/0x190
 Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75
 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  __wake_up_common_lock+0x7c/0xc0
  qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
 qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0
 ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.
  ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1
 ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]
 qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0
  ? __switch_to+0x10c/0x450
 ? process_one_work+0x1a7/0x360
 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.
  ? worker_thread+0x1ce/0x390
  ? create_worker+0x1a0/0x1a0
 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70
  ? kthread+0x10a/0x120
 qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8
  ? set_kthread_struct+0x40/0x40
 qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.
  ? ret_from_fork+0x1f/0x40
 qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout

The system was under memory stress where driver was not able to allocate an
SRB to carry out error recovery of cable pull.  The failure to flush causes
upper layer to start modifying scsi_cmnd.  When the system frees up some
memory, the subsequent cable pull trigger another command flush. At this
point the driver access a null pointer when attempting to DMA unmap the
SGL.

Add a check to make sure commands are flush back on session tear down to
prevent the null pointer access.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran 
Signed-off-by: Nilesh Javali 
Link: https://lore.kernel.org/r/20240227164127.36465-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: core: Fix unremoved procfs host directory regression

2024-04-13T10:51:32+00:00

commit f23a4d6e07570826fe95023ca1aa96a011fa9f84 upstream.

Commit fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name}
directory earlier") fixed a bug related to modules loading/unloading, by
adding a call to scsi_proc_hostdir_rm() on scsi_remove_host(). But that led
to a potential duplicate call to the hostdir_rm() routine, since it's also
called from scsi_host_dev_release(). That triggered a regression report,
which was then fixed by commit be03df3d4bfe ("scsi: core: Fix a procfs host
directory removal regression"). The fix just dropped the hostdir_rm() call
from dev_release().

But it happens that this proc directory is created on scsi_host_alloc(),
and that function "pairs" with scsi_host_dev_release(), while
scsi_remove_host() pairs with scsi_add_host(). In other words, it seems the
reason for removing the proc directory on dev_release() was meant to cover
cases in which a SCSI host structure was allocated, but the call to
scsi_add_host() didn't happen. And that pattern happens to exist in some
error paths, for example.

Syzkaller causes that by using USB raw gadget device, error'ing on
usb-storage driver, at usb_stor_probe2(). By checking that path, we can see
that the BadDevice label leads to a scsi_host_put() after a SCSI host
allocation, but there's no call to scsi_add_host() in such path. That leads
to messages like this in dmesg (and a leak of the SCSI host proc
structure):

usb-storage 4-1:87.51: USB Mass Storage device detected
proc_dir_entry 'scsi/usb-storage' already registered
WARNING: CPU: 1 PID: 3519 at fs/proc/generic.c:377 proc_register+0x347/0x4e0 fs/proc/generic.c:376

The proper fix seems to still call scsi_proc_hostdir_rm() on dev_release(),
but guard that with the state check for SHOST_CREATED; there is even a
comment in scsi_host_dev_release() detailing that: such conditional is
meant for cases where the SCSI host was allocated but there was no calls to
{add,remove}_host(), like the usb-storage case.

This is what we propose here and with that, the error path of usb-storage
does not trigger the warning anymore.

Reported-by: syzbot+c645abf505ed21f931b5@syzkaller.appspotmail.com
Fixes: be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression")
Cc: stable@vger.kernel.org
Cc: Bart Van Assche 
Cc: John Garry 
Cc: Shin'ichiro Kawasaki 
Signed-off-by: Guilherme G. Piccoli 
Link: https://lore.kernel.org/r/20240313113006.2834799-1-gpiccoli@igalia.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn

2024-03-26T22:22:23+00:00

[ Upstream commit b69600231f751304db914c63b937f7098ed2895c ]

Some callback functions used here take a boolean argument, others take a
status argument. This breaks KCFI type checking, so clang now warns about
the function pointer cast:

drivers/scsi/bfa/bfad_bsg.c:2138:29: error: cast from 'void (*)(void *, enum bfa_status)' to 'bfa_cb_cbfn_t' (aka 'void (*)(void *, enum bfa_boolean)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Assuming the code is actually correct here and the callers always match the
argument types of the callee, rework this to replace the explicit cast with
a union of the two pointer types. This does not change the behavior of the
code, so if something is actually broken here, a larger rework may be
necessary.

Fixes: 37ea0558b87a ("[SCSI] bfa: Added support to collect and reset fcport stats")
Fixes: 3ec4f2c8bff2 ("[SCSI] bfa: Added support to configure QOS and collect stats.")
Reviewed-by: Kees Cook 
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20240222124433.2046570-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: csiostor: Avoid function pointer casts

2024-03-26T22:22:23+00:00

[ Upstream commit 9f3dbcb5632d6876226031d552ef6163bb3ad215 ]

csiostor uses function pointer casts to keep the csio_ln_ev state machine
hidden, but this causes warnings about control flow integrity (KCFI)
violations in clang-16 and higher:

drivers/scsi/csiostor/csio_lnode.c:1098:33: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1098 |         return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1369:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1369 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1373:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1373 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1377:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1377 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Move the enum into a shared header so the correct types can be used without
the need for casts.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20240213100518.457623-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

2024-03-26T22:22:13+00:00

[ Upstream commit ee0017c3ed8a8abfa4d40e42f908fb38c31e7515 ]

If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.

Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.

Signed-off-by: Ranjan Kumar 
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin